Daily Papers

Long-horizon robot manipulation reuses skills across many task compositions, but improving these compositions with additional end-to-end demonstrations is costly. A practical self-improving system must decide both what to teach next and where to apply that supervision. We present ROBOCOACH, a world-model-guided coaching framework that uses imagined failures to guide demonstration requests and expert updates. Its Route-Imagine-Diagnose-Improve (RIDI) loop executes reusable skill experts inside COACHWORLD, our shared action-conditioned world model, and uses a progress judge to record the first subtask that fails to complete. Aggregated records select which subtask demonstrations to acquire and which expert adapters to update. Across two simulation suites and two real-robot platforms, imagined and deployed success correlate over 22 task-policy pairs (rho = 0.840). Controlled comparisons show that our coaching method outperforms matched baselines under matched data budgets and update schedules. With only 150 additional subtask demonstrations, success rises from 13.3% to 75.0% on Franka and from 40.0% to 83.8% on AgileX. The coached experts also transfer to four held-out compositions, achieving an average success of 35.0%, compared with 0% for a shared-policy baseline updated with uniformly acquired demonstrations. Together, these results show that world models can serve as active coaches, turning imagined failures into targeted supervision for modular policy improvement. Project Page: https://robocoach-ai.github.io/

A pretrained robot foundation policy may execute most of a long-horizon task yet repeatedly fail at a few critical subtasks. Collecting additional full-task demonstrations for supervised fine-tuning (SFT) requires operators to repeat behaviors the policy already performs well. Reinforcement learning (RL) fine-tuning offers a promising path to bridge this gap, but existing approaches struggle to solve long-horizon tasks using only sparse rewards. We present PARTS (Policy Adaptation with RL on Targeted Subtasks), a real-world subtask RL framework that concentrates practice at these bottlenecks while allowing training rollouts to proceed with minimal human intervention. The frozen pretrained policy supplies nominal actions throughout execution, while agent-generated selectors and success verifiers activate residual corrections and provide local outcome rewards. These rewards support learning from successful subtasks even when complete-task successes are scarce. Training combines online RL with success-reweighted retraining, and each retrained residual policy is redeployed to collect further experience. Humans identify bottlenecks during setup and perform physical resets when needed. On bimanual YAM and single-arm Franka tasks, PARTS improves complete-task success from 32% to 61% and from 50% to 95%, respectively, using tens of minutes of real-world RL rollouts per task on average. Compared with existing real-world RL fine-tuning methods, PARTS raises full-task success by more than 25% under the same robot-rollout budget while requiring less human involvement.

Foundation GUI agents can automate complex digital tasks, but deployment is hindered by scarce and biased training data, ambiguous prompts, and unreliable execution. Routine workflows rely on user-specific tools and tacit conventions, so unstated instructions can produce arbitrary variations across runs. We present UI-Mate, a foundation GUI agent that integrates an environment-grounded training stack with in-context demonstration learning. UI-Mate makes three contributions: A Scalable Environment-Grounded Training Stack: A closed-loop data engine automates task generation, environment construction, rollout, filtering, capability balancing, SFT, and online RL across massively parallel environments via unified task-verifier bundles. In-Context Demonstration Learning: A mechanism that transforms multimodal demonstrations into flexible subtask-level workflows, follows relevant demonstrated steps, and re-plans from the live interface. OSWorkerBench Benchmark and Insights: A benchmark of 100 long-horizon office tasks across 41 applications that supports instruction-only and demonstration-guided evaluation. Its demonstration resources separate a 33-task self-demo setting, built from successful strong-agent rollouts of the same targets, from a 45-task variant-demo setting, built from human recordings of related but non-identical tasks. Experiments show that UI-Mate-27B sets a new open-weight state of the art on general computer-use benchmarks, scoring 77.0% on OSWorld-Verified and 66.2% on WindowsAgentArena. On OSWorkerBench, it reaches 41.0% strict success and 76.9% progress, outperforming its Qwen3.6-27B base by 17.7 and 24.5 points. On the 33-task self-demo subset, one demonstration raises strict success from 17.2% to 35.4% and progress from 67.9% to 81.1%, substantially improving long-horizon reliability. Project page: https://ui-mate.github.io.

Spatial intelligence requires more than describing object locations. Under incomplete observation, models must identify and acquire missing evidence, interpret it in a common spatial frame, and act on it. We introduce VA-Bench to evaluate the complete observe-reason-act-revise loop. General-purpose MLLMs learn procedural context from RGB-only demonstrations, actively select camera viewpoints, issue metric Cartesian commands, and revise them from execution feedback. Models receive no privileged object poses, oracle trajectories, or learned action heads. A fixed model-agnostic controller executes only model-specified targets. VA-Bench contains 14 base task families (11 single-arm and three dual-arm), seven held-out geometry/layout variants, and a long-horizon five-object composition track. We evaluate 12 primary model conditions in three independent runs over the same 20 physically verified seeds per base task, reporting terminal success, nine trajectory-level behavioral diagnostics, and subtask progress. First, the best-performing model scores 100.0% on target localization and 78.9% on spatial relations in the annotated run. Its three-run macro-average task success is only 53.93+/-3.17%. Second, active camera control significantly improves task success over passive multi-view observation. In one matched comparison, success rises from 27.86% to 57.50%. Third, held-out geometric transfer can reduce task success by over 30 percentage points. No model completes a strict long-horizon episode, despite substantial partial progress. VA-Bench thus tests whether general-purpose MLLMs can turn visual demonstrations and actively acquired evidence into successful embodied action.

We present Galaxea Open-World Dataset, a large-scale, diverse collection of robot behaviors recorded in authentic human living and working environments. All demonstrations are gathered using a consistent robotic embodiment, paired with precise subtask-level language annotations to facilitate both training and evaluation. Building on this dataset, we introduce G0, a dual-system framework that couples a Vision-Language Model (VLM) for multimodal planning with a Vision-Language-Action (VLA) model for fine-grained execution. G0 is trained using a three-stage curriculum: cross-embodiment pre-training, single-embodiment pre-training, and task-specific post-training. A comprehensive benchmark spanning tabletop manipulation, few-shot learning, and long-horizon mobile manipulation, demonstrates the effectiveness of our approach. In particular, we find that the single-embodiment pre-training stage, together with the Galaxea Open-World Dataset, plays a critical role in achieving strong performance.

Large-scale robot learning has recently shown promise for enabling robots to perform complex tasks by integrating perception, control, and language understanding. Yet, it struggles with long-horizon, contact-rich manipulation such as deformable object handling, where demonstration quality is inconsistent. Reward modeling offers a natural solution: by providing grounded progress signals, it transforms noisy demonstrations into stable supervision that generalizes across diverse trajectories. We introduce a stage-aware, video-based reward modeling framework that jointly predicts high-level task stages and fine-grained progress. Reward labels are automatically derived from natural language subtask annotations, ensuring consistent progress estimation across variable-length demonstrations. This design overcomes frame-index labeling, which fails in variable-duration tasks like folding a T-shirt. Our reward model demonstrates robustness to variability, generalization to out-of-distribution settings, and strong utility for policy training. Building on it, we propose Reward-Aligned Behavior Cloning (RA-BC), which filters high-quality data and reweights samples by reward. Experiments show the reward model alone outperforms baselines on validation and real robot rollouts. Integrated into RA-BC, our approach achieves 83% success on folding T-shirts from the flattened state and 67% from the crumpled state -- far surpassing vanilla behavior cloning, which attains only 8% and 0% success. Overall, our results highlight reward modeling as a key enabler for scalable, annotation-efficient, and robust imitation learning in long-horizon manipulation.

World Action Models (WAMs) offer a promising paradigm for robotic manipulation by jointly modeling visual state transitions and robot actions. However, existing WAMs are constrained by limited temporal context, coarse episode-level language supervision, and predominantly text-only conditioning, which hinder task-progress tracking and fine-grained language-video-action grounding while limiting visual-context reasoning and cross-embodiment transfer. In this paper, we introduce WorldScape Policy 2.0, a controllable WAM with reasoning-augmented long short-term memory. Its causal short-term visual memory supplies recent observations as DiT prefill to preserve local interaction dynamics, while its long short-term event memory organizes historical VLM outputs into global-history, local-active, and event-boundary representations for progress-aware retrieval. The retrieved history augments perception and autoregressively generated planning tokens, yielding an implicit subgoal condition for autonomous planning; semantic forcing further transfers event-level instruction semantics into this latent planning pathway. To establish fine-grained multimodal controllability, we construct ManipEvent-5M, an event-grounded embodied pretraining dataset containing nearly 5 million event segments with aligned action trajectories, episode-level task instructions, segment-level subtask captions, goal images, and video demonstrations. These designs provide a unified interface for autonomous planning from high-level instructions and controllable execution from fine-grained text, goal-image, or video-context prompts. Experiments in both simulation and real-world platforms demonstrate superior capabilities in long-horizon autonomous planning, fine-grained instruction following and in-context adaptation.

We present the results and the main findings of SemEval-2024 Task 8: Multigenerator, Multidomain, and Multilingual Machine-Generated Text Detection. The task featured three subtasks. Subtask A is a binary classification task determining whether a text is written by a human or generated by a machine. This subtask has two tracks: a monolingual track focused solely on English texts and a multilingual track. Subtask B is to detect the exact source of a text, discerning whether it is written by a human or generated by a specific LLM. Subtask C aims to identify the changing point within a text, at which the authorship transitions from human to machine. The task attracted a large number of participants: subtask A monolingual (126), subtask A multilingual (59), subtask B (70), and subtask C (30). In this paper, we present the task, analyze the results, and discuss the system submissions and the methods they used. For all subtasks, the best systems used LLMs.

Propaganda is the expression of an opinion or an action by an individual or a group deliberately designed to influence the opinions or the actions of other individuals or groups with reference to predetermined ends, which is achieved by means of well-defined rhetorical and psychological devices. Propaganda techniques are commonly used in social media to manipulate or to mislead users. Thus, there has been a lot of recent research on automatic detection of propaganda techniques in text as well as in memes. However, so far the focus has been primarily on English. With the aim to bridge this language gap, we ran a shared task on detecting propaganda techniques in Arabic tweets as part of the WANLP 2022 workshop, which included two subtasks. Subtask~1 asks to identify the set of propaganda techniques used in a tweet, which is a multilabel classification problem, while Subtask~2 asks to detect the propaganda techniques used in a tweet together with the exact span(s) of text in which each propaganda technique appears. The task attracted 63 team registrations, and eventually 14 and 3 teams made submissions for subtask 1 and 2, respectively. Finally, 11 teams submitted system description papers.

Robots' ability to follow language instructions and execute diverse 3D tasks is vital in robot learning. Traditional imitation learning-based methods perform well on seen tasks but struggle with novel, unseen ones due to variability. Recent approaches leverage large foundation models to assist in understanding novel tasks, thereby mitigating this issue. However, these methods lack a task-specific learning process, which is essential for an accurate understanding of 3D environments, often leading to execution failures. In this paper, we introduce GravMAD, a sub-goal-driven, language-conditioned action diffusion framework that combines the strengths of imitation learning and foundation models. Our approach breaks tasks into sub-goals based on language instructions, allowing auxiliary guidance during both training and inference. During training, we introduce Sub-goal Keypose Discovery to identify key sub-goals from demonstrations. Inference differs from training, as there are no demonstrations available, so we use pre-trained foundation models to bridge the gap and identify sub-goals for the current task. In both phases, GravMaps are generated from sub-goals, providing flexible 3D spatial guidance compared to fixed 3D positions. Empirical evaluations on RLBench show that GravMAD significantly outperforms state-of-the-art methods, with a 28.63% improvement on novel tasks and a 13.36% gain on tasks encountered during training. These results demonstrate GravMAD's strong multi-task learning and generalization in 3D manipulation. Video demonstrations are available at: https://gravmad.github.io.

Language models are aligned to emulate the collective voice of many, resulting in outputs that align with no one in particular. Steering LLMs away from generic output is possible through supervised finetuning or RLHF, but requires prohibitively large datasets for new ad-hoc tasks. We argue that it is instead possible to align an LLM to a specific setting by leveraging a very small number (<10) of demonstrations as feedback. Our method, Demonstration ITerated Task Optimization (DITTO), directly aligns language model outputs to a user's demonstrated behaviors. Derived using ideas from online imitation learning, DITTO cheaply generates online comparison data by treating users' demonstrations as preferred over output from the LLM and its intermediate checkpoints. We evaluate DITTO's ability to learn fine-grained style and task alignment across domains such as news articles, emails, and blog posts. Additionally, we conduct a user study soliciting a range of demonstrations from participants (N=16). Across our benchmarks and user study, we find that win-rates for DITTO outperform few-shot prompting, supervised fine-tuning, and other self-play methods by an average of 19% points. By using demonstrations as feedback directly, DITTO offers a novel method for effective customization of LLMs.

A robot following a multi-step instruction needs to act on the right objects in the right order, even as the scene changes. It must also maintain awareness of task progress and determine when to advance. To address these challenges, we introduce Orchestra, an agent harness that separates task planning and execution management from action generation. Orchestra decomposes a complete multimodal instruction into ordered subtasks, tracks completed steps, and updates the locations of relevant objects and destinations during execution. It maintains a shared context containing the active subtask, spatial grounding, and recent observations. An action policy uses this context to generate actions, while a separately trained progress evaluator estimates when to advance to the next subtask. To evaluate whether robots trained on atomic instructions and short trajectories can execute longer subtask sequences, we introduce a benchmark named RMBench-Compose. Orchestra achieves a mean success rate of 68.22% across nine RMBench tasks, outperforming Mem-0 by 26.22 percentage points. On RMBench-Compose, it achieves an Average Success Length (ASL) of 7.35 subtasks, 2.46 times that of HarnessVLA. Across four real-world multi-step tasks, it improves mean ASL by 25.0% over Orchestra using the base π_{0.5} policy. These results show that Orchestra helps robots carry out longer sequences of subtasks while preserving the requested subtask order and acting on the specified objects. Our code and project page are available at https://youpengwen.github.io/Orchestra.

We tackle real-world long-horizon robot manipulation tasks through skill discovery. We present a bottom-up approach to learning a library of reusable skills from unsegmented demonstrations and use these skills to synthesize prolonged robot behaviors. Our method starts with constructing a hierarchical task structure from each demonstration through agglomerative clustering. From the task structures of multi-task demonstrations, we identify skills based on the recurring patterns and train goal-conditioned sensorimotor policies with hierarchical imitation learning. Finally, we train a meta controller to compose these skills to solve long-horizon manipulation tasks. The entire model can be trained on a small set of human demonstrations collected within 30 minutes without further annotations, making it amendable to real-world deployment. We systematically evaluated our method in simulation environments and on a real robot. Our method has shown superior performance over state-of-the-art imitation learning methods in multi-stage manipulation tasks. Furthermore, skills discovered from multi-task demonstrations boost the average task success by 8% compared to those discovered from individual tasks.

Robotic manipulation often requires inferring task-relevant states from past interactions when the current observation alone is insufficient to determine the appropriate action. Despite progress in benchmarking memory-augmented vision-language-action (VLA) models, application-oriented tasks requiring history-dependent semantic inference remain underrepresented. We introduce GiT (Grounded in Time), a dataset and benchmark for grounding manipulation decisions in past events across biolaboratory, household, and industrial scenarios. It includes real-robot and Universal Manipulation Interface (UMI) style demonstrations covering 18 bimanual tasks, together with simulation data and a ManiSkill-based evaluation suite covering nine tasks. Fine-grained subtask annotations and annotated counterfactual task pairs, in which similar current observations require different actions depending on prior events, support policy learning and targeted evaluation of history use. Evaluations of representative end-to-end VLA models in simulation and on selected real-world tasks reveal substantial room for improvement in history-dependent manipulation. The dataset and benchmark are available at the project page.

Robots operating in real-world environments must often execute complex, multi-step bimanual tasks over long horizons rather than single, isolated actions. Current manipulation datasets provide limited support for this capability: although single-arm datasets reach hundreds of thousands of trajectories, they typically provide only one high-level instruction per episode, while existing bimanual datasets provide subtask annotations for only part of their recorded hours. We present FineART, a densely annotated bimanual manipulation dataset comprising 40,543 episodes (1,718 hours) and 533,913 subtasks across 151 tasks. We also introduce FineART-VLA, a vision-language-action policy that predicts its own next subtask to guide its actions. Mid-training on FineART's subtask annotations improves FineART-VLA's success at following spatial instructions from 32.0% to 100.0%. With step-by-step human subtask guidance, success on unseen long-horizon tasks increases from 16.0% to 76.0%. Furthermore, FineART-VLA matches baseline performance on a new robot with 10x less fine-tuning data and generalizes zero-shot to unseen tasks. We open-source the full dataset, model weights, and training code.

Large-scale generative language and vision-language models (LLMs and VLMs) excel in few-shot in-context learning for decision making and instruction following. However, they require high-quality exemplar demonstrations to be included in their context window. In this work, we ask: Can LLMs and VLMs generate their own prompt examples from generic, sub-optimal demonstrations? We propose In-Context Abstraction Learning (ICAL), a method that builds a memory of multimodal experience insights from sub-optimal demonstrations and human feedback. Given a noisy demonstration in a new domain, VLMs abstract the trajectory into a general program by fixing inefficient actions and annotating cognitive abstractions: task relationships, object state changes, temporal subgoals, and task construals. These abstractions are refined and adapted interactively through human feedback while the agent attempts to execute the trajectory in a similar environment. The resulting abstractions, when used as exemplars in the prompt, significantly improve decision-making in retrieval-augmented LLM and VLM agents. Our ICAL agent surpasses the state-of-the-art in dialogue-based instruction following in TEACh, multimodal web agents in VisualWebArena, and action anticipation in Ego4D. In TEACh, we achieve a 12.6% improvement in goal-condition success. In VisualWebArena, our task success rate improves over the SOTA from 14.3% to 22.7%. In Ego4D action forecasting, we improve over few-shot GPT-4V and remain competitive with supervised models. We show finetuning our retrieval-augmented in-context agent yields additional improvements. Our approach significantly reduces reliance on expert-crafted examples and consistently outperforms in-context learning from action plans that lack such insights.

Computer-use agents can perform increasingly complex GUI tasks, yet unfamiliar software and workflows requiring human domain knowledge remain challenging. Human demonstrations convey procedural knowledge through the same GUI interaction space, but reuse requires interpreting actions in context and separating workflow rules from task-specific details. We thus introduce Work2Skill, a framework that captures human GUI experience for reusable agent skill induction. WorkRecorder provides the framework's infrastructure for collecting this experience, aligning screen recordings, mouse and keyboard events, and available accessibility-tree information. Using WorkRecorder, we construct WorkDemo-350, the first synchronized multimodal dataset of human desktop GUI demonstrations for reusable agent skill induction and downstream evaluation. Its 350 demonstrations are screened for completeness and task success. We then propose an agentic skill-induction method that inspects evidence on demand to produce reusable skills capturing workflow rules, step dependencies, and completion checks. When the same four execution models are equipped with skills induced by each method under shared execution settings, Work2Skill achieves the highest scores and success rates. Mean score improvements over the corresponding No Skill baseline are 4.67--10.54 points on MyPCBench Bounded Action and 3.11--7.50 points on a 286-task subset of OSWorld-Verified. Our code and data are available at https://github.com/china-qijizhifeng/Work2Skill.

The advancement of visual language models (VLMs) has enhanced mobile device operations, allowing simulated human-like actions to address user requirements. Current VLM-based mobile operating assistants can be structured into three levels: task, subtask, and action. The subtask level, linking high-level goals with low-level executable actions, is crucial for task completion but faces two challenges: ineffective subtasks that lower-level agent cannot execute and inefficient subtasks that fail to contribute to the completion of the higher-level task. These challenges stem from VLM's lack of experience in decomposing subtasks within GUI scenarios in multi-agent architecture. To address these, we propose a new mobile assistant architecture with constrained high-frequency o}ptimized planning (CHOP). Our approach overcomes the VLM's deficiency in GUI scenarios planning by using human-planned subtasks as the basis vector. We evaluate our architecture in both English and Chinese contexts across 20 Apps, demonstrating significant improvements in both effectiveness and efficiency. Our dataset and code is available at https://github.com/Yuqi-Zhou/CHOP

Language Model (LM) agents for cybersecurity that are capable of autonomously identifying vulnerabilities and executing exploits have the potential to cause real-world impact. Policymakers, model providers, and other researchers in the AI and cybersecurity communities are interested in quantifying the capabilities of such agents to help mitigate cyberrisk and investigate opportunities for penetration testing. Toward that end, we introduce Cybench, a framework for specifying cybersecurity tasks and evaluating agents on those tasks. We include 40 professional-level Capture the Flag (CTF) tasks from 4 distinct CTF competitions, chosen to be recent, meaningful, and spanning a wide range of difficulties. Each task includes its own description, starter files, and is initialized in an environment where an agent can execute bash commands and observe outputs. Since many tasks are beyond the capabilities of existing LM agents, we introduce subtasks, which break down a task into intermediary steps for more gradated evaluation; we add subtasks for 17 of the 40 tasks. To evaluate agent capabilities, we construct a cybersecurity agent and evaluate 7 models: GPT-4o, Claude 3 Opus, Claude 3.5 Sonnet, Mixtral 8x22b Instruct, Gemini 1.5 Pro, Llama 3 70B Chat, and Llama 3.1 405B Instruct. Without guidance, we find that agents are able to solve only the easiest complete tasks that took human teams up to 11 minutes to solve, with Claude 3.5 Sonnet and GPT-4o having the highest success rates. Finally, subtasks provide more signal for measuring performance compared to unguided runs, with models achieving a 3.2\% higher success rate on complete tasks with subtask-guidance than without subtask-guidance. All code and data are publicly available at https://cybench.github.io

A vision--language--action (VLA) policy can complete complex tasks while ignoring the evidence that should determine its actions. An object held near the wrist camera can displace the instructed target. Language and action show the same pattern: a familiar noun can trigger the operation it was paired with in training even after the verb changes, and a gripper that closed on nothing may lift anyway. We call these dependencies modality shortcuts: regularities in successful demonstrations make visual, lexical, or motor cues sufficient to predict expert actions without the task evidence needed for the underlying decision. More demonstrations of the same kind can raise task success while leaving these shortcuts intact. We propose Perturbot which makes task-relevant evidence easier to use and shortcuts insufficient on their own: it applies task-preserving wrist-view perturbations, enriches instructions with decision-relevant captions, and adds random and failed trajectory segments relabeled with the behavior they contain. It complements scaling by changing what is scaled, and leaves inference unchanged. Moreover, we propose GroundingFscore, an offline score that diagnoses how severely a policy relies on modality shortcuts. Task success rate shows whether a policy improves, while GroundingFscore reveals whether the policy scales healthily, relying on task evidence rather than shortcuts. Together, Perturbot and GroundingFscore provide a training-and-evaluation framework for disentangling VLA decisions from shortcut priors while preserving responsiveness to task-relevant evidence.

Language instructions and demonstrations are two natural ways for users to teach robots personalized tasks. Recent progress in Large Language Models (LLMs) has shown impressive performance in translating language instructions into code for robotic tasks. However, translating demonstrations into task code continues to be a challenge due to the length and complexity of both demonstrations and code, making learning a direct mapping intractable. This paper presents Demo2Code, a novel framework that generates robot task code from demonstrations via an extended chain-of-thought and defines a common latent specification to connect the two. Our framework employs a robust two-stage process: (1) a recursive summarization technique that condenses demonstrations into concise specifications, and (2) a code synthesis approach that expands each function recursively from the generated specifications. We conduct extensive evaluation on various robot task benchmarks, including a novel game benchmark Robotouille, designed to simulate diverse cooking tasks in a kitchen environment. The project's website is available at https://portal-cornell.github.io/demo2code/

In embodied manipulation, Vision Language Action (VLA) models can execute atomic skills, but long-horizon manipulation requires recombining these skills without demonstrations for every skill combination. The full instruction route treats skill chaining as long-horizon imitation. In a controlled study, full instruction training on limited skill combination sequences reaches 40.0% ordered success on covered combinations but only 7.7% on recombination, suggesting memorization of sequence templates rather than robust skill recombination. We introduce Hierarchical Subtask Execution (HSE), a diagnostic framework that exposes skill recombination through a shared modular interface over the planner, trigger, and policy, decomposing long-horizon failures into separable modes. We introduce RoboCombine, a benchmark for skill recombination without combined skill training trajectories, with metrics for ordered success and transition conversion across subtask boundaries. RoboCombine reveals that atomic competence alone does not ensure ordered execution. Failures concentrate at transitions where downstream subtasks launch from handoff states from preceding subtasks rather than canonical atomic starts. We identify this mismatch as the start state gap. To address it, we introduce Pose Robust Task Initialization (PRTI), a lightweight atomic task post-training strategy that broadens start state coverage beyond canonical starts. Under oracle timed HSE on RoboCombine, PRTI reaches 18.16% ordered success, compared with 4.21% under random perturbation and 9.47% under a robot-reset oracle, without combined skill training trajectories. These results show that combinatorial generalization requires handoff robust atomic skills that convert first stage progress into reliable downstream execution, not merely decomposition into known subtasks. Code: https://github.com/AutoLab-SAI-SJTU/RoboCombine.

Automatically generating scripts (i.e. sequences of key steps described in text) from video demonstrations and reasoning about the subsequent steps are crucial to the modern AI virtual assistants to guide humans to complete everyday tasks, especially unfamiliar ones. However, current methods for generative script learning rely heavily on well-structured preceding steps described in text and/or images or are limited to a certain domain, resulting in a disparity with real-world user scenarios. To address these limitations, we present a new benchmark challenge -- MultiScript, with two new tasks on task-oriented multimodal script learning: (1) multimodal script generation, and (2) subsequent step prediction. For both tasks, the input consists of a target task name and a video illustrating what has been done to complete the target task, and the expected output is (1) a sequence of structured step descriptions in text based on the demonstration video, and (2) a single text description for the subsequent step, respectively. Built from WikiHow, MultiScript covers multimodal scripts in videos and text descriptions for over 6,655 human everyday tasks across 19 diverse domains. To establish baseline performance on MultiScript, we propose two knowledge-guided multimodal generative frameworks that incorporate the task-related knowledge prompted from large language models such as Vicuna. Experimental results show that our proposed approaches significantly improve over the competitive baselines.

We present the results and the main findings of SemEval-2020 Task 11 on Detection of Propaganda Techniques in News Articles. The task featured two subtasks. Subtask SI is about Span Identification: given a plain-text document, spot the specific text fragments containing propaganda. Subtask TC is about Technique Classification: given a specific text fragment, in the context of a full document, determine the propaganda technique it uses, choosing from an inventory of 14 possible propaganda techniques. The task attracted a large number of participants: 250 teams signed up to participate and 44 made a submission on the test set. In this paper, we present the task, analyze the results, and discuss the system submissions and the methods they used. For both subtasks, the best systems used pre-trained Transformers and ensembles.

Computer-use agents need to capture procedural knowledge of how people use software. User telemetry offers a scalable source of this knowledge. However, learning reusable skills from these logs requires addressing three challenges: (1) Goal Underspecification, since logs do not record the goal behind each action; (2) Non-Replayability, since past activity cannot be replayed to evaluate skill updates; and (3) Interleaved Trajectories, since logs may mix several tasks without marking their boundaries. To address these, we introduce TeleTune, a framework for learning a textual skill library from offline logs without recorded goals, cannot be replayed during optimization, and may interleave tasks. TeleTune uses action-prediction errors on logged trajectories to propose library edits and keep only those that improve held-out action-prediction accuracy, which we call skill-guided progress. The learned workflows also enable retrieval of demonstrations that cover the subgoals of a new task. At test time, the agent is provided with the learned library and the workflow-based retrieved demonstrations. Experiments on WorkArena and Online-Mind2Web show that TeleTune outperforms random retrieval, Agent Workflow Memory (AWM), and their combination. We find that the best baseline varies by setting, whereas TeleTune achieves average success rates of 77.1% and 80.6%, respectively, improving over the strongest baseline on each benchmark by 6.7% and 7.7%. Under the heaviest perturbation of the WorkArena training data,TeleTune keeps the highest average success rate at 68.5%, 6.3% above the strongest baseline. Our analyses show (1) skill optimization and workflow-based retrieval are complementary, (2) optimizing on fixed logs costs 5 to 75 times fewer tokens than validating the same edits with live episodes, (3) skill-guided progress tracks the live success rate.

Assistants on assembly tasks have a large potential to benefit humans from everyday tasks to industrial settings. However, no testbeds support application-oriented system evaluation in a practical setting, especially in assembly. To foster the development, we propose a new multimodal QA dataset on assembly activities. Our dataset, ProMQA-Assembly, consists of 391 QA pairs that require the multimodal understanding of human-activity recordings and their instruction manuals in an online-style manner. In the development, we adopt a semi-automated QA annotation approach, where LLMs generate candidates and humans verify them, as a cost-effective method, and further improve it by integrating fine-grained action labels to diversify question types. Furthermore, we create instruction task graphs for the target tasks of assembling toy vehicles. These newly created task graphs are used in our benchmarking experiment, as well as to facilitate the human verification process in the QA annotation. Utilizing our dataset, we benchmark models, including competitive proprietary multimodal models. Our results suggest great room for improvement for the current models. We believe our new evaluation dataset can contribute to the further development of procedural-activity assistants.

Real-world tasks consist of multiple inter-dependent subtasks (e.g., a dirty pan needs to be washed before it can be used for cooking). In this work, we aim to model the causal dependencies between such subtasks from instructional videos describing the task. This is a challenging problem since complete information about the world is often inaccessible from videos, which demands robust learning mechanisms to understand the causal structure of events. We present Multimodal Subtask Graph Generation (MSG2), an approach that constructs a Subtask Graph defining the dependency between a task's subtasks relevant to a task from noisy web videos. Graphs generated by our multimodal approach are closer to human-annotated graphs compared to prior approaches. MSG2 further performs the downstream task of next subtask prediction 85% and 30% more accurately than recent video transformer models in the ProceL and CrossTask datasets, respectively.

We introduce AgentSynth, a scalable and cost-efficient pipeline for automatically synthesizing high-quality tasks and trajectory datasets for generalist computer-use agents. Leveraging information asymmetry, AgentSynth constructs subtasks that are simple during generation but significantly more challenging when composed into long-horizon tasks, enabling the creation of over 6,000 diverse and realistic tasks. Our pipeline begins with an LLM-based task proposer guided by a persona, followed by an execution agent that completes the task and logs the trajectory. This process is repeated iteratively to form a sequence of subtasks, which are then summarized by a separate agent into a composite task of controllable difficulty. A key strength of AgentSynth is its ability to precisely modulate task complexity by varying the number of subtasks. Empirical evaluations show that state-of-the-art LLM agents suffer a steep performance drop, from 18% success at difficulty level 1 to just 4% at level 6, highlighting the benchmark's difficulty and discriminative power. Moreover, our pipeline achieves a low average cost of \$0.60 per trajectory, orders of magnitude cheaper than human annotations. Our code and data are publicly available at https://github.com/sunblaze-ucb/AgentSynth

Vision-language-action (VLA) models often struggle to generalize to skill combinations absent from their fine-tuning demonstrations, even when every constituent skill has been demonstrated. We focus on a vision shortcut as one failure mode: during fine-tuning, visual observations can serve as a proxy for the instruction, so a policy may execute a demonstrated combination associated with similar observations rather than the instructed combination. This motivates training with counterfactual pairs formed by holding a demonstration observation fixed while changing the instruction to specify an undemonstrated combination. These pairs, however, lack corresponding demonstrated action targets. Crucially, the currently required skill has already been demonstrated, but actions from those executions cannot serve as direct targets because the same skill can require different actions across observations. We propose CRAFT, which transfers supervision from demonstrated executions of the required skill to counterfactual pairs using skill representations that can be reused across executions of the same skill. Across three VLA models and two simulation benchmarks, CRAFT improves success on undemonstrated combinations while maintaining high success on demonstrated ones; it also improves compositional generalization on a real robot. Project website: https://taegeunyang.github.io/craft/

Teaching robots new skills quickly and conveniently is crucial for the broader adoption of robotic systems. In this work, we address the problem of one-shot imitation from a single human demonstration, given by an RGB-D video recording through a two-stage process. In the first stage which is offline, we extract the trajectory of the demonstration. This entails segmenting manipulated objects and determining their relative motion in relation to secondary objects such as containers. Subsequently, in the live online trajectory generation stage, we first re-detect all objects, then we warp the demonstration trajectory to the current scene, and finally, we trace the trajectory with the robot. To complete these steps, our method makes leverages several ancillary models, including those for segmentation, relative object pose estimation, and grasp prediction. We systematically evaluate different combinations of correspondence and re-detection methods to validate our design decision across a diverse range of tasks. Specifically, we collect demonstrations of ten different tasks including pick-and-place tasks as well as articulated object manipulation. Finally, we perform extensive evaluations on a real robot system to demonstrate the effectiveness and utility of our approach in real-world scenarios. We make the code publicly available at http://ditto.cs.uni-freiburg.de.

Memory systems have shown promise for improving agent performance, but their potential remains largely unexplored for small language models, which struggle to generate sufficient successful trajectories on their own. We propose Agent Memory Distillation (AMD), a training-free framework that transfers structured knowledge from a large teacher agent to a small student agent through hierarchical memory. AMD constructs three complementary memory types from successful teacher trajectories: Workflow memory encodes task-level strategies, Subtask memory provides concrete behavioral examples at an intermediate granularity, and Function memory captures per-function calling conventions and common pitfalls. Workflow and Subtask memories are injected proactively at the start of each task, while Function memory is retrieved reactively upon tool-calling errors. We evaluate AMD on three tool-use benchmarks using four student models (4B-8B parameters) with GPT-5-mini as the teacher, achieving average accuracy gains of 27.2%p, 11.2%p, and 3.4%p on AppWorld, BFCL V3, and ToolSandbox, while consistently outperforming existing memory-based baselines. Further analysis shows that Subtask memory contributes the largest gains, teacher effectiveness depends on both teacher capability and student compatibility, and 4B-sized students benefit most from AMD.

LLM agents that orchestrate frozen vision-language-action (VLA) policies improve across episodes through text memory, which records what the agent did but not how the task is done. A demonstration video shows it, but fits poorly into an agent's context. The full video slows every turn, fixed keyframes lose the contact detail that decides whether a grasp holds, and what the agent needs shifts from the task's structure while planning to the frames around each contact. We introduce Recursive Video In-Context Learning (RV-ICL), a training-free method that turns a demonstration into a hierarchy the agent navigates rather than a prompt it receives. The hierarchy is built from the sub-events of the demonstration, such as grasps and releases. Its levels grow finer, from keyframes of the whole task to phases, moments and short clips, and are exposed through read-only tools. The agent reads the coarse levels before planning. During execution it re-enters the hierarchy whenever a step needs more detail and loads only the clip of its current sub-goal. One demonstration per task is enough. Built on RPent, RV-ICL raises success from 92.6% to 96.5% on LIBERO-PRO and from 86.7% to 95.8% on LIBERO-Plus.

Large language models (LLMs) are increasingly employed for complex multi-step planning tasks, where the tool retrieval (TR) step is crucial for achieving successful outcomes. Two prevalent approaches for TR are single-step retrieval, which utilizes the complete query, and sequential retrieval using task decomposition (TD), where a full query is segmented into discrete atomic subtasks. While single-step retrieval lacks the flexibility to handle "inter-tool dependency," the TD approach necessitates maintaining "subtask-tool atomicity alignment," as the toolbox can evolve dynamically. To address these limitations, we introduce the Progressive Tool retrieval to Improve Planning (ProTIP) framework. ProTIP is a lightweight, contrastive learning-based framework that implicitly performs TD without the explicit requirement of subtask labels, while simultaneously maintaining subtask-tool atomicity. On the ToolBench dataset, ProTIP outperforms the ChatGPT task decomposition-based approach by a remarkable margin, achieving a 24% improvement in Recall@K=10 for TR and a 41% enhancement in tool accuracy for plan generation.

Naturalistic computer-use traces, passively recorded screenshots and mouse or keyboard actions, are a valuable resource for deriving symbolic, auditable, and reusable models of how everyday work is done. Such models matter as computer-use agents enter real work, where agents need to learn how tasks are actually performed, and organizations need to audit and reuse that knowledge. However, inducing such task models is challenging, as activity is observed only as low-level events and real-world work is multi-threaded with interleaved goals. Existing methods assume a given task or a single workflow, and produce step-level summaries rather than structured task models. We introduce Task Model Induction (TMI), which (i) discovers the latent tasks in an unconstrained trace, disentangling concurrent activity, and (ii) for each latent task, induces a task model pairing a hierarchical objective model of recursive goal decomposition with a procedure model of the control flow that organized the execution. Intrinsically, on controlled human and agent trajectories, TMI recovers interleaved tasks with 0.974 agreement against ground-truth groupings and reconstructs 74.9% of the observed execution steps, far more than the strongest workflow induction baseline. Extrinsically, skills derived from TMI's task models improve held-out task accuracy by 30.0% over the strongest baseline.

This work explores the problem of generating task graphs of real-world activities. Different from prior formulations, we consider a setting where text transcripts of instructional videos performing a real-world activity (e.g., making coffee) are provided and the goal is to identify the key steps relevant to the task as well as the dependency relationship between these key steps. We propose a novel task graph generation approach that combines the reasoning capabilities of instruction-tuned language models along with clustering and ranking components to generate accurate task graphs in a completely unsupervised manner. We show that the proposed approach generates more accurate task graphs compared to a supervised learning approach on tasks from the ProceL and CrossTask datasets.

In this paper we investigate learning visual models for the steps of ordinary tasks using weak supervision via instructional narrations and an ordered list of steps instead of strong supervision via temporal annotations. At the heart of our approach is the observation that weakly supervised learning may be easier if a model shares components while learning different steps: `pour egg' should be trained jointly with other tasks involving `pour' and `egg'. We formalize this in a component model for recognizing steps and a weakly supervised learning framework that can learn this model under temporal constraints from narration and the list of steps. Past data does not permit systematic studying of sharing and so we also gather a new dataset, CrossTask, aimed at assessing cross-task sharing. Our experiments demonstrate that sharing across tasks improves performance, especially when done at the component level and that our component model can parse previously unseen tasks by virtue of its compositionality.

A number of tasks have been proposed recently to facilitate easy access to charts such as chart QA and summarization. The dominant paradigm to solve these tasks has been to fine-tune a pretrained model on the task data. However, this approach is not only expensive but also not generalizable to unseen tasks. On the other hand, large language models (LLMs) have shown impressive generalization capabilities to unseen tasks with zero- or few-shot prompting. However, their application to chart-related tasks is not trivial as these tasks typically involve considering not only the underlying data but also the visual features in the chart image. We propose PromptChart, a multimodal few-shot prompting framework with LLMs for chart-related applications. By analyzing the tasks carefully, we have come up with a set of prompting guidelines for each task to elicit the best few-shot performance from LLMs. We further propose a strategy to inject visual information into the prompts. Our experiments on three different chart-related information consumption tasks show that with properly designed prompts LLMs can excel on the benchmarks, achieving state-of-the-art.

Procedural tasks with multiple ordered steps are ubiquitous in daily life. Recent advances in multimodal large language models (MLLMs) have enabled personal assistants that support daily activities. However, existing systems primarily provide reactive guidance triggered by user queries, or limited proactive assistance for isolated short-term events rather than long-horizon procedural tasks. In this work, we introduce Pro^2Assist, a step-aware proactive assistant that continuously tracks fine-grained task progress and reasons over the user's evolving state to provide timely assistance throughout tasks. Pro^2Assist leverages multimodal data from augmented reality (AR) glasses to achieve motion-based perception. It then extracts step-oriented procedural context from multi-scale temporal dynamics and task-specific expert knowledge. Based on both sensory input and procedural context, Pro^2Assist performs continuous reasoning to infer user needs and display timely assistance on AR glasses. We evaluate Pro^2Assist using a dataset curated from public sources and a real-world dataset collected on our testbed with AR glasses. Extensive evaluations show that Pro^2Assist outperforms the best-performing baselines by over 21% in procedural action understanding accuracy, and it achieves up to 2.29x the proactive timing accuracy of baselines. A user study with 20 participants further shows that 90% find Pro^2Assist useful, indicating its effectiveness for real-world procedural assistance.

Industrial automation is at a pivotal moment, as Physical AI is driving a transition from rigid, hand-engineered automation systems toward more flexible and adaptive systems. This shift has created a growing demand for large-scale, real-world robot demonstration data, making teleoperation an increasingly important mechanism for data collection. However, high-quality teleoperated demonstrations remain difficult to obtain in practice, as novice operators often produce episodes that are task-successful but suboptimal for downstream use due to inefficient motion, repeated corrections, or operation near robot joint limits. We present a Data Quality Assessment and Feedback (DQAF) framework that closes the loop in teleoperation by providing immediate post-episode feedback grounded in semantic task progress and robot telemetry. The framework extracts quality relevant signals such as sub-task progress, motion smoothness, stalls, kinematic limits and converts them into structured quality assessments and actionable natural-language feedback. Unlike binary success or failure feedback, the proposed system explains why an episode is suboptimal and highlights specific behaviors to correct in the next trial. We evaluate the framework through a diagnostic validation study and a pilot user study. In the validation study, the system is compared with a human reviewer during dataset curation, producing rejection reasons and actionable feedback for improvement. In the pilot study with three novice operators across two manipulation tasks, the operator who received the systems immediate, automated post-episode feedback improved faster than those who did not, producing higher-quality demonstrations sooner.

Prompt-based learning has emerged as a successful paradigm in natural language processing, where a single general-purpose language model can be instructed to perform any task specified by input prompts. Yet task specification in robotics comes in various forms, such as imitating one-shot demonstrations, following language instructions, and reaching visual goals. They are often considered different tasks and tackled by specialized models. This work shows that we can express a wide spectrum of robot manipulation tasks with multimodal prompts, interleaving textual and visual tokens. We design a transformer-based generalist robot agent, VIMA, that processes these prompts and outputs motor actions autoregressively. To train and evaluate VIMA, we develop a new simulation benchmark with thousands of procedurally-generated tabletop tasks with multimodal prompts, 600K+ expert trajectories for imitation learning, and four levels of evaluation protocol for systematic generalization. VIMA achieves strong scalability in both model capacity and data size. It outperforms prior SOTA methods in the hardest zero-shot generalization setting by up to 2.9times task success rate given the same training data. With 10times less training data, VIMA still performs 2.7times better than the top competing approach. We open-source all code, pretrained models, dataset, and simulation benchmark at https://vimalabs.github.io

Existing computer-use agent benchmarks do not fully evaluate agents acting as assistants. A useful assistant retrieves information across complex, multi-step workflows, synthesizes it into artifacts (documents, presentations, spreadsheets), and navigates program interfaces to produce a coherent final product. Such workflows demand reasoning and synthesis, decomposition of complex tasks, as well as visual and spatial understanding. To study agents on workflows like these, we introduce KNOWS, a benchmark of open-ended, complex, browser-based tasks that jointly evaluate these capabilities, with each task culminating in a produced artifact. To write tasks, we develop a task design rubric and a protocol for ensuring that tasks meet the requirements. Each task is paired with an evaluator, a program that combines deterministic checks with LLM judgments to balance the richness, reliability, and automation tradeoff inherent to agent evaluation. We evaluate and analyze frontier computer-use agents and browser-based harnesses. They achieve moderate scores on partial-success metrics, but the best performer fully succeeds in fewer than 3% of our complex, long-horizon tasks. Failures on visual steps render the resulting artifacts unusable, even when agents complete more than 50% of other evaluation steps. Our results expose limitations of current agents acting as end-to-end assistants, and call for progress on tool use, visual understanding, and long-horizon reasoning.

We hand the community HAND, a simple and time-efficient method for teaching robots new manipulation tasks through human hand demonstrations. Instead of relying on task-specific robot demonstrations collected via teleoperation, HAND uses easy-to-provide hand demonstrations to retrieve relevant behaviors from task-agnostic robot play data. Using a visual tracking pipeline, HAND extracts the motion of the human hand from the hand demonstration and retrieves robot sub-trajectories in two stages: first filtering by visual similarity, then retrieving trajectories with similar behaviors to the hand. Fine-tuning a policy on the retrieved data enables real-time learning of tasks in under four minutes, without requiring calibrated cameras or detailed hand pose estimation. Experiments also show that HAND outperforms retrieval baselines by over 2x in average task success rates on real robots. Videos can be found at our project website: https://liralab.usc.edu/handretrieval/.

Enabling robots to learn novel visuomotor skills in a data-efficient manner remains an unsolved problem with myriad challenges. A popular paradigm for tackling this problem is through leveraging large unlabeled datasets that have many behaviors in them and then adapting a policy to a specific task using a small amount of task-specific human supervision (i.e. interventions or demonstrations). However, how best to leverage the narrow task-specific supervision and balance it with offline data remains an open question. Our key insight in this work is that task-specific data not only provides new data for an agent to train on but can also inform the type of prior data the agent should use for learning. Concretely, we propose a simple approach that uses a small amount of downstream expert data to selectively query relevant behaviors from an offline, unlabeled dataset (including many sub-optimal behaviors). The agent is then jointly trained on the expert and queried data. We observe that our method learns to query only the relevant transitions to the task, filtering out sub-optimal or task-irrelevant data. By doing so, it is able to learn more effectively from the mix of task-specific and offline data compared to naively mixing the data or only using the task-specific data. Furthermore, we find that our simple querying approach outperforms more complex goal-conditioned methods by 20% across simulated and real robotic manipulation tasks from images. See https://sites.google.com/view/behaviorretrieval for videos and code.

Instructing a robot to complete an everyday task within our homes has been a long-standing challenge for robotics. While recent progress in language-conditioned imitation learning and offline reinforcement learning has demonstrated impressive performance across a wide range of tasks, they are typically limited to short-horizon tasks -- not reflective of those a home robot would be expected to complete. While existing architectures have the potential to learn these desired behaviours, the lack of the necessary long-horizon, multi-step datasets for real robotic systems poses a significant challenge. To this end, we present the Long-Horizon Manipulation (LHManip) dataset comprising 200 episodes, demonstrating 20 different manipulation tasks via real robot teleoperation. The tasks entail multiple sub-tasks, including grasping, pushing, stacking and throwing objects in highly cluttered environments. Each task is paired with a natural language instruction and multi-camera viewpoints for point-cloud or NeRF reconstruction. In total, the dataset comprises 176,278 observation-action pairs which form part of the Open X-Embodiment dataset. The full LHManip dataset is made publicly available at https://github.com/fedeceola/LHManip.

Imitation Learning has empowered recent advances in learning robotic manipulation tasks by addressing shortcomings of Reinforcement Learning such as exploration and reward specification. However, research in this area has been limited to modest-sized datasets due to the difficulty of collecting large quantities of task demonstrations through existing mechanisms. This work introduces RoboTurk to address this challenge. RoboTurk is a crowdsourcing platform for high quality 6-DoF trajectory based teleoperation through the use of widely available mobile devices (e.g. iPhone). We evaluate RoboTurk on three manipulation tasks of varying timescales (15-120s) and observe that our user interface is statistically similar to special purpose hardware such as virtual reality controllers in terms of task completion times. Furthermore, we observe that poor network conditions, such as low bandwidth and high delay links, do not substantially affect the remote users' ability to perform task demonstrations successfully on RoboTurk. Lastly, we demonstrate the efficacy of RoboTurk through the collection of a pilot dataset; using RoboTurk, we collected 137.5 hours of manipulation data from remote workers, amounting to over 2200 successful task demonstrations in 22 hours of total system usage. We show that the data obtained through RoboTurk enables policy learning on multi-step manipulation tasks with sparse rewards and that using larger quantities of demonstrations during policy learning provides benefits in terms of both learning consistency and final performance. For additional results, videos, and to download our pilot dataset, visit http://roboturk.stanford.edu/{roboturk.stanford.edu}

Graphical User Interface (GUI) automation holds significant promise for enhancing human productivity by assisting with computer tasks. Existing task formulations primarily focus on simple tasks that can be specified by a single, language-only instruction, such as "Insert a new slide." In this work, we introduce VideoGUI, a novel multi-modal benchmark designed to evaluate GUI assistants on visual-centric GUI tasks. Sourced from high-quality web instructional videos, our benchmark focuses on tasks involving professional and novel software (e.g., Adobe Photoshop or Stable Diffusion WebUI) and complex activities (e.g., video editing). VideoGUI evaluates GUI assistants through a hierarchical process, allowing for identification of the specific levels at which they may fail: (i) high-level planning: reconstruct procedural subtasks from visual conditions without language descriptions; (ii) middle-level planning: generate sequences of precise action narrations based on visual state (i.e., screenshot) and goals; (iii) atomic action execution: perform specific actions such as accurately clicking designated elements. For each level, we design evaluation metrics across individual dimensions to provide clear signals, such as individual performance in clicking, dragging, typing, and scrolling for atomic action execution. Our evaluation on VideoGUI reveals that even the SoTA large multimodal model GPT4o performs poorly on visual-centric GUI tasks, especially for high-level planning.

Terminal agents have demonstrated strong potential for autonomous command-line execution, yet their training remains constrained by the scarcity of high-quality and diverse execution trajectories. Existing approaches mitigate this bottleneck by synthesizing large-scale terminal task instances for trajectory sampling. However, they primarily focus on scaling the number of tasks while providing limited control over the diversity of execution trajectories that agents actually experience during training. In this paper, we present SkillSynth, an automated framework for terminal task synthesis built on a scenario-mediated skill graph. SkillSynth first constructs a large-scale skill graph, where scenarios serve as intermediate transition nodes that connect diverse command-line skills. It then samples paths from this graph as abstractions of real-world workflows, and uses a multi-agent harness to instantiate them into executable task instances. By grounding task synthesis in graph-sampled workflow paths, SkillSynth explicitly controls the diversity of minimal execution trajectories required to solve the synthesized tasks. Experiments on Terminal-Bench demonstrate the effectiveness of SkillSynth. Moreover, task instances synthesized by SkillSynth have been adopted to train Hy3 Preview, contributing to its enhanced agentic capabilities in terminal-based settings.

Large language models (LLMs) have shown increasing capacity at planning and executing a high-level goal in a live computer environment (e.g. MiniWoB++). To perform a task, recent works often require a model to learn from trace examples of the task via either supervised learning or few/many-shot prompting. Without these trace examples, it remains a challenge how an agent can autonomously learn and improve its control on a computer, which limits the ability of an agent to perform a new task. We approach this problem with a zero-shot agent that requires no given expert traces. Our agent plans for executable actions on a partially observed environment, and iteratively progresses a task by identifying and learning from its mistakes via self-reflection and structured thought management. On the easy tasks of MiniWoB++, we show that our zero-shot agent often outperforms recent SoTAs, with more efficient reasoning. For tasks with more complexity, our reflective agent performs on par with prior best models, even though previous works had the advantages of accessing expert traces or additional screen information.

Large language models (LLMs) can perform complex reasoning by generating intermediate reasoning steps. Providing these steps for prompting demonstrations is called chain-of-thought (CoT) prompting. CoT prompting has two major paradigms. One leverages a simple prompt like "Let's think step by step" to facilitate step-by-step thinking before answering a question. The other uses a few manual demonstrations one by one, each composed of a question and a reasoning chain that leads to an answer. The superior performance of the second paradigm hinges on the hand-crafting of task-specific demonstrations one by one. We show that such manual efforts may be eliminated by leveraging LLMs with the "Let's think step by step" prompt to generate reasoning chains for demonstrations one by one, i.e., let's think not just step by step, but also one by one. However, these generated chains often come with mistakes. To mitigate the effect of such mistakes, we find that diversity matters for automatically constructing demonstrations. We propose an automatic CoT prompting method: Auto-CoT. It samples questions with diversity and generates reasoning chains to construct demonstrations. On ten public benchmark reasoning tasks with GPT-3, Auto-CoT consistently matches or exceeds the performance of the CoT paradigm that requires manual designs of demonstrations. Code is available at https://github.com/amazon-research/auto-cot

Humans are remarkably efficient at learning tasks from demonstrations, but today's imitation learning methods for robot manipulation often require hundreds or thousands of demonstrations per task. We investigate two fundamental priors for improving learning efficiency: decomposing manipulation trajectories into sequential alignment and interaction phases, and retrieval-based generalisation. Through 3,450 real-world rollouts, we systematically study this decomposition. We compare different design choices for the alignment and interaction phases, and examine generalisation and scaling trends relative to today's dominant paradigm of behavioural cloning with a single-phase monolithic policy. In the few-demonstrations-per-task regime (<10 demonstrations), decomposition achieves an order of magnitude improvement in data efficiency over single-phase learning, with retrieval consistently outperforming behavioural cloning for both alignment and interaction. Building on these insights, we develop Multi-Task Trajectory Transfer (MT3), an imitation learning method based on decomposition and retrieval. MT3 learns everyday manipulation tasks from as little as a single demonstration each, whilst also generalising to novel object instances. This efficiency enables us to teach a robot 1,000 distinct everyday tasks in under 24 hours of human demonstrator time. Through 2,200 additional real-world rollouts, we reveal MT3's capabilities and limitations across different task families. Videos of our experiments can be found on at https://www.robot-learning.uk/learning-1000-tasks.

Today, large language models (LLMs) are taught to use new tools by providing a few demonstrations of the tool's usage. Unfortunately, demonstrations are hard to acquire, and can result in undesirable biased usage if the wrong demonstration is chosen. Even in the rare scenario that demonstrations are readily available, there is no principled selection protocol to determine how many and which ones to provide. As tasks grow more complex, the selection search grows combinatorially and invariably becomes intractable. Our work provides an alternative to demonstrations: tool documentation. We advocate the use of tool documentation, descriptions for the individual tool usage, over demonstrations. We substantiate our claim through three main empirical findings on 6 tasks across both vision and language modalities. First, on existing benchmarks, zero-shot prompts with only tool documentation are sufficient for eliciting proper tool usage, achieving performance on par with few-shot prompts. Second, on a newly collected realistic tool-use dataset with hundreds of available tool APIs, we show that tool documentation is significantly more valuable than demonstrations, with zero-shot documentation significantly outperforming few-shot without documentation. Third, we highlight the benefits of tool documentations by tackling image generation and video tracking using just-released unseen state-of-the-art models as tools. Finally, we highlight the possibility of using tool documentation to automatically enable new applications: by using nothing more than the documentation of GroundingDino, Stable Diffusion, XMem, and SAM, LLMs can re-invent the functionalities of the just-released Grounded-SAM and Track Anything models.

The ability of robots to interpret human instructions and execute manipulation tasks necessitates the availability of task-relevant tabletop scenes for training. However, traditional methods for creating these scenes rely on time-consuming manual layout design or purely randomized layouts, which are limited in terms of plausibility or alignment with the tasks. In this paper, we formulate a novel task, namely task-oriented tabletop scene generation, which poses significant challenges due to the substantial gap between high-level task instructions and the tabletop scenes. To support research on such a challenging task, we introduce MesaTask-10K, a large-scale dataset comprising approximately 10,700 synthetic tabletop scenes with manually crafted layouts that ensure realistic layouts and intricate inter-object relations. To bridge the gap between tasks and scenes, we propose a Spatial Reasoning Chain that decomposes the generation process into object inference, spatial interrelation reasoning, and scene graph construction for the final 3D layout. We present MesaTask, an LLM-based framework that utilizes this reasoning chain and is further enhanced with DPO algorithms to generate physically plausible tabletop scenes that align well with given task descriptions. Exhaustive experiments demonstrate the superior performance of MesaTask compared to baselines in generating task-conforming tabletop scenes with realistic layouts. Project page is at https://mesatask.github.io/

Human demonstrations as prompts are a powerful way to program robots to do long-horizon manipulation tasks. However, translating these demonstrations into robot-executable actions presents significant challenges due to execution mismatches in movement styles and physical capabilities. Existing methods either depend on human-robot paired data, which is infeasible to scale, or rely heavily on frame-level visual similarities that often break down in practice. To address these challenges, we propose RHyME, a novel framework that automatically aligns human and robot task executions using optimal transport costs. Given long-horizon robot demonstrations, RHyME synthesizes semantically equivalent human videos by retrieving and composing short-horizon human clips. This approach facilitates effective policy training without the need for paired data. RHyME successfully imitates a range of cross-embodiment demonstrators, both in simulation and with a real human hand, achieving over 50\% increase in task success compared to previous methods. We release our code and datasets at https://portal-cornell.github.io/rhyme/.

Deformable object manipulation stands as one of the most captivating yet formidable challenges in robotics. While previous techniques have predominantly relied on learning latent dynamics through demonstrations, typically represented as either particles or images, there exists a pertinent limitation: acquiring suitable demonstrations, especially for long-horizon tasks, can be elusive. Moreover, basing learning entirely on demonstrations can hamper the model's ability to generalize beyond the demonstrated tasks. In this work, we introduce a demonstration-free hierarchical planning approach capable of tackling intricate long-horizon tasks without necessitating any training. We employ large language models (LLMs) to articulate a high-level, stage-by-stage plan corresponding to a specified task. For every individual stage, the LLM provides both the tool's name and the Python code to craft intermediate subgoal point clouds. With the tool and subgoal for a particular stage at our disposal, we present a granular closed-loop model predictive control strategy. This leverages Differentiable Physics with Point-to-Point correspondence (DiffPhysics-P2P) loss in the earth mover distance (EMD) space, applied iteratively. Experimental findings affirm that our technique surpasses multiple benchmarks in dough manipulation, spanning both short and long horizons. Remarkably, our model demonstrates robust generalization capabilities to novel and previously unencountered complex tasks without any preliminary demonstrations. We further substantiate our approach with experimental trials on real-world robotic platforms. Our project page: https://qq456cvb.github.io/projects/donut.

Evaluation of Computer-Use Agents (CUAs) is often limited to the final deliverables they create (at the end of hundreds of steps) and assessed with functional verifiers, as seen in OSWorld. However, such evaluation of end-state performance lacks transparency into how and why agents fail in various tasks, obfuscating critical insight for subsequent improvement. For instance, agents that err during keyboard inputs would require a different mitigation strategy from those that fail to precisely provide click-based inputs on the graphical UI. We introduce OSWorld-Pro: a set of over 300 tasks containing over 2800 subgoals to enable the procedural evaluation of CUAs grounded in over 67,000 human annotations. We use robust human-aligned LLM-Judges to evaluate the fulfillment of OSWorld-Pro subgoals and thereby reveal the progress that models make throughout a series of sequentially dependent subgoals. Our findings reveal that OSWorld-Pro is challenging even for state-of-the-art LLMs, with top performers like Claude Opus 5 achieving only 75.7% vs. 83.4% on OSWorld. Furthermore, we identify critical process-focused failure modes of various models (e.g. subgoal-irrelevant actions and click-based mistakes) to provide insights to improve performance and efficiency of CUAs.

Vision-Language-Action (VLA) models have demonstrated strong capabilities in robotic manipulation by integrating visual perception, language understanding, and robot action generation. Existing research has primarily focused on improving model architectures, training strategies, and dataset scale, while little attention has been paid to how demonstrations are collected and organized. We identify demonstration organization as a fundamental yet overlooked aspect of imitation learning, as it directly affects policy learning efficiency, training stability, and policy generalization. To address this gap, we propose a simple-to-complex structured demonstration collection strategy for VLA learning using a dual-arm robotic platform. Our approach systematically organizes data through three general principles: (i) decomposing complex manipulation tasks into progressively learnable sub-skills, (ii) standardizing the interaction environment to reduce unnecessary variability, and (iii) organizing demonstrations according to progressively increasing task complexity. This structured design enables VLA models to first acquire fundamental manipulation skills before learning increasingly complex task compositions, facilitating more effective learning of long-horizon manipulation tasks. We evaluate the proposed strategy on two representative robotic manipulation tasks: block grasping and sorting, and towel folding. Experimental results show consistent improvements in task success rate and training stability compared with the baseline method of directly collecting end-to-end complete task trajectories. These findings highlight demonstration organization as a previously underexplored but important factor in VLA learning and provide practical insights into efficient skill acquisition, scalable dataset construction, and long-horizon robotic manipulation.

The improved competence of generative models can help building multi-modal virtual assistants that leverage modalities beyond language. By observing humans performing multi-step tasks, one can build assistants that have situational awareness of actions and tasks being performed, enabling them to cater assistance based on this understanding. In this paper, we develop a Context-aware Instructional Task Assistant with Multi-modal Large Language Models (InsTALL) that leverages an online visual stream (e.g. a user's screen share or video recording) and responds in real-time to user queries related to the task at hand. To enable useful assistance, InsTALL 1) trains a multi-modal model on task videos and paired textual data, and 2) automatically extracts task graph from video data and leverages it at training and inference time. We show InsTALL achieves state-of-the-art performance across proposed sub-tasks considered for multimodal activity understanding -- task recognition (TR), action recognition (AR), next action prediction (AP), and plan prediction (PP) -- and outperforms existing baselines on two novel sub-tasks related to automatic error identification.

TaskGen is an open-sourced agentic framework which uses an Agent to solve an arbitrary task by breaking them down into subtasks. Each subtask is mapped to an Equipped Function or another Agent to execute. In order to reduce verbosity (and hence token usage), TaskGen uses StrictJSON that ensures JSON output from the Large Language Model (LLM), along with additional features such as type checking and iterative error correction. Key to the philosophy of TaskGen is the management of information/memory on a need-to-know basis. We empirically evaluate TaskGen on various environments such as 40x40 dynamic maze navigation with changing obstacle locations (100% solve rate), TextWorld escape room solving with dense rewards and detailed goals (96% solve rate), web browsing (69% of actions successful), solving the MATH dataset (71% solve rate over 100 Level-5 problems), Retrieval Augmented Generation on NaturalQuestions dataset (F1 score of 47.03%)

Compositional reinforcement learning is a promising approach for training policies to perform complex long-horizon tasks. Typically, a high-level task is decomposed into a sequence of subtasks and a separate policy is trained to perform each subtask. In this paper, we focus on the problem of training subtask policies in a way that they can be used to perform any task; here, a task is given by a sequence of subtasks. We aim to maximize the worst-case performance over all tasks as opposed to the average-case performance. We formulate the problem as a two agent zero-sum game in which the adversary picks the sequence of subtasks. We propose two RL algorithms to solve this game: one is an adaptation of existing multi-agent RL algorithms to our setting and the other is an asynchronous version which enables parallel training of subtask policies. We evaluate our approach on two multi-task environments with continuous states and actions and demonstrate that our algorithms outperform state-of-the-art baselines.

Unified multimodal models (UMMs) have shown impressive capabilities in generating natural images and supporting multimodal reasoning. However, their potential in supporting computer-use planning tasks, which are closely related to our lives, remain underexplored. Image generation and editing in computer-use tasks require capabilities like spatial reasoning and procedural understanding, and it is still unknown whether UMMs have these capabilities to finish these tasks or not. Therefore, we propose PlanViz, a new benchmark designed to evaluate image generation and editing for computer-use tasks. To achieve the goal of our evaluation, we focus on sub-tasks which frequently involve in daily life and require planning steps. Specifically, three new sub-tasks are designed: route planning, work diagramming, and web&UI displaying. We address challenges in data quality ensuring by curating human-annotated questions and reference images, and a quality control process. For challenges of comprehensive and exact evaluation, a task-adaptive score, PlanScore, is proposed. The score helps understanding the correctness, visual quality and efficiency of generated images. Through experiments, we highlight key limitations and opportunities for future research on this topic.

Reinforcement learning (RL) agents improve through trial-and-error, but when reward is sparse and the agent cannot discover successful action sequences, learning stagnates. This has been a notable problem in training deep RL agents to perform web-based tasks, such as booking flights or replying to emails, where a single mistake can ruin the entire sequence of actions. A common remedy is to "warm-start" the agent by pre-training it to mimic expert demonstrations, but this is prone to overfitting. Instead, we propose to constrain exploration using demonstrations. From each demonstration, we induce high-level "workflows" which constrain the allowable actions at each time step to be similar to those in the demonstration (e.g., "Step 1: click on a textbox; Step 2: enter some text"). Our exploration policy then learns to identify successful workflows and samples actions that satisfy these workflows. Workflows prune out bad exploration directions and accelerate the agent's ability to discover rewards. We use our approach to train a novel neural policy designed to handle the semi-structured nature of websites, and evaluate on a suite of web tasks, including the recent World of Bits benchmark. We achieve new state-of-the-art results, and show that workflow-guided exploration improves sample efficiency over behavioral cloning by more than 100x.

General-purpose robot control requires models to understand task intent, identify where to interact, capture how the scene evolves, and generate precise actions. Vision-language-action models provide strong semantic priors but typically do not explicitly model scene dynamics, while world-action models couple visual prediction with control without necessarily exposing the task-relevant semantic and spatial structure needed for fine-grained manipulation. We present MachEmbodied-U0 (ME-U0), a unified embodied foundation model connecting understanding and generation experts through a Mixture-of-Transformers architecture. Subtask prediction and affordance grounding guide joint visual-dynamics and action generation via flow matching. Visual dynamics encompass future RGB, depth, surface normals, and optical flow, providing complementary supervision for appearance, geometry, and motion. Multi-rate Rotary Position Encoding (MRPE) aligns visual dynamics with fine-grained control. We pretrain ME-U0 on approximately 4,200 hours of curated demonstrations from robotic datasets and egocentric datasets. Using only the supervision natively available in each downstream benchmark, ME-U0 achieves an average score of 17.66 on the RoboDojo simulation benchmark and average success rates of 99.0\% and 82.5\% on LIBERO and LIBERO-Plus, respectively. We additionally validate ME-U0 on real-world robotic manipulation tasks, demonstrating its effectiveness beyond simulation. Without corresponding downstream supervision, ME-U0 further demonstrates zero-shot subtask prediction, affordance grounding, and visual dynamics on simulated and real-world observations. Overall, ME-U0 combines competitive downstream control performance with transferable task-grounding and visual-dynamics capabilities across simulation and the real world.

Understanding the progress of a task allows humans to not only track what has been done but also to better plan for future goals. We demonstrate TaKSIE, a novel framework that incorporates task progress knowledge into visual subgoal generation for robotic manipulation tasks. We jointly train a recurrent network with a latent diffusion model to generate the next visual subgoal based on the robot's current observation and the input language command. At execution time, the robot leverages a visual progress representation to monitor the task progress and adaptively samples the next visual subgoal from the model to guide the manipulation policy. We train and validate our model in simulated and real-world robotic tasks, achieving state-of-the-art performance on the CALVIN manipulation benchmark. We find that the inclusion of task progress knowledge can improve the robustness of trained policy for different initial robot poses or various movement speeds during demonstrations. The project website can be found at https://live-robotics-uva.github.io/TaKSIE/ .

We propose a novel framework for learning high-level cognitive capabilities in robot manipulation tasks, such as making a smiley face using building blocks. These tasks often involve complex multi-step reasoning, presenting significant challenges due to the limited paired data connecting human instructions (e.g., making a smiley face) and robot actions (e.g., end-effector movement). Existing approaches relieve this challenge by adopting an open-loop paradigm decomposing high-level instructions into simple sub-task plans, and executing them step-by-step using low-level control models. However, these approaches are short of instant observations in multi-step reasoning, leading to sub-optimal results. To address this issue, we propose to automatically collect a cognitive robot dataset by Large Language Models (LLMs). The resulting dataset AlphaBlock consists of 35 comprehensive high-level tasks of multi-step text plans and paired observation sequences. To enable efficient data acquisition, we employ elaborated multi-round prompt designs that effectively reduce the burden of extensive human involvement. We further propose a closed-loop multi-modal embodied planning model that autoregressively generates plans by taking image observations as input. To facilitate effective learning, we leverage MiniGPT-4 with a frozen visual encoder and LLM, and finetune additional vision adapter and Q-former to enable fine-grained spatial perception for manipulation tasks. We conduct experiments to verify the superiority over existing open and closed-loop methods, and achieve a significant increase in success rate by 21.4% and 14.5% over ChatGPT and GPT-4 based robot tasks. Real-world demos are shown in https://www.youtube.com/watch?v=ayAzID1_qQk .

Many everyday tasks ranging from fixing appliances, cooking recipes to car maintenance require expert knowledge, especially when tasks are complex and multi-step. Despite growing interest in AI agents, there is a scarcity of dialogue-video datasets grounded for real world task assistance. In this paper, we propose a simple yet effective approach that transforms single-person instructional videos into task-guidance two-person dialogues, aligned with fine grained steps and video-clips. Our fully automatic approach, powered by large language models, offers an efficient alternative to the substantial cost and effort required for human-assisted data collection. Using this technique, we build HowToDIV, a large-scale dataset containing 507 conversations, 6636 question-answer pairs and 24 hours of videoclips across diverse tasks in cooking, mechanics, and planting. Each session includes multi-turn conversation where an expert teaches a novice user how to perform a task step by step, while observing user's surrounding through a camera and microphone equipped wearable device. We establish the baseline benchmark performance on HowToDIV dataset through Gemma-3 model for future research on this new task of dialogues for procedural-task assistance.

Large language models (LMs) are able to in-context learn -- perform a new task via inference alone by conditioning on a few input-label pairs (demonstrations) and making predictions for new inputs. However, there has been little understanding of how the model learns and which aspects of the demonstrations contribute to end task performance. In this paper, we show that ground truth demonstrations are in fact not required -- randomly replacing labels in the demonstrations barely hurts performance on a range of classification and multi-choce tasks, consistently over 12 different models including GPT-3. Instead, we find that other aspects of the demonstrations are the key drivers of end task performance, including the fact that they provide a few examples of (1) the label space, (2) the distribution of the input text, and (3) the overall format of the sequence. Together, our analysis provides a new way of understanding how and why in-context learning works, while opening up new questions about how much can be learned from large language models through inference alone.

Expert demonstrations are widely assumed to be the gold standard for robot imitation learning. Yet for fine-grained manipulation such as insertion, stacking, and alignment, we uncover a counterintuitive failure mode: fluent demonstrations can be poor teachers. A skilled teleoperator compresses the decisive moments of alignment and recovery into a brief temporal window, leaving the policy flooded with redundant free-space motion and starved of supervision exactly where precision determines success. We address this bottleneck at two levels. At the data level, slowing down near alignment and resampling critical segments both help, yet the gain comes mainly from broadening the coverage of recovery states the policy must learn, not from reweighting frames it already has. Such data-side fixes, however, leave the policy's per-frame view untouched: a single image still maps directly to an action, and the local motion that governs correction stays implicit. We therefore turn to the representation level and introduce STAIR (Spatio-Temporal feature As an Interface for Robot learning), a compact dynamic feature that bridges the vision-language model and the action expert, distilling the short-horizon motion already recorded in each trajectory into dense, motion-aware supervision. Trained on fluent data alone, STAIR recovers most of the deliberate-demonstration gain (50.0 to 62.2% overall, approaching the 64.4% of deliberate demonstrations). These results call for a more pedagogical view of robot data, optimized for machine learnability rather than human efficiency alone.

Training web agents to navigate complex, real-world websites requires them to master subtasks - short-horizon interactions on multiple UI components (e.g., choosing the correct date in a date picker, or scrolling in a container to extract information). We introduce WARC-Bench (Web Archive Benchmark), a novel web navigation benchmark featuring 438 tasks designed to evaluate multimodal AI agents on subtasks. WARC-Bench enables sandboxed interactions with dynamic and realistic webpages using Web ARChive files. We show that WARC-Bench is challenging for leading computer-use models, with the highest observed success rate being 64.8%. To improve open source models on subtask, we explore two common training techniques: supervised fine-tuning (SFT) and reinforcement learning with verifiable rewards (RLVR). Experiments show that SFT models obtain a 48.8% success rate on the benchmark. Training with RLVR over SFT checkpoints, even in data-scarce settings, improves the score to 52.8% on WARC-Bench, outperforming many frontier models. Our analysis concludes that mastering these subtasks is essential for robust web planning and navigation, and is a capability not extensively evaluated by existing benchmarks.

We propose a multitask pretraining approach ZeroPrompt for zero-shot generalization, focusing on task scaling and zero-shot prompting. While previous models are trained on only a few dozen tasks, we scale to 1,000 tasks for the first time using real-world data. This leads to a crucial discovery that task scaling can be an efficient alternative to model scaling; i.e., the model size has little impact on performance with an extremely large number of tasks. Our results show that task scaling can substantially improve training efficiency by 30 times in FLOPs. Moreover, we present a prompting method that incorporates a genetic algorithm to automatically search for the best prompt for unseen tasks, along with a few other improvements. Empirically, ZeroPrompt substantially improves both the efficiency and the performance of zero-shot learning across a variety of academic and production datasets.

Generalizing to long-horizon manipulation tasks in a zero-shot setting remains a central challenge in robotics. Current multimodal foundation based approaches, despite their capabilities, typically fail to decompose high-level commands into executable action sequences from static visual input alone. To address this challenge, we introduce Super-Mimic, a hierarchical framework that enables zero-shot robotic imitation by directly inferring procedural intent from unscripted human demonstration videos. Our framework is composed of two sequential modules. First, a Human Intent Translator (HIT) parses the input video using multimodal reasoning to produce a sequence of language-grounded subtasks. These subtasks then condition a Future Dynamics Predictor (FDP), which employs a generative model that synthesizes a physically plausible video rollout for each step. The resulting visual trajectories are dynamics-aware, explicitly modeling crucial object interactions and contact points to guide the low-level controller. We validate this approach through extensive experiments on a suite of long-horizon manipulation tasks, where Super-Mimic significantly outperforms state-of-the-art zero-shot methods by over 20%. These results establish that coupling video-driven intent parsing with prospective dynamics modeling is a highly effective strategy for developing general-purpose robotic systems.

The NIST Assembly Task Board #1 remains a challenging benchmark for learning-based methods in robotic manipulation. Over short horizons, it demands precise, contact-rich control of small, tight-fitting parts. Over long horizons, it requires recovery and coordination across extended action sequences. Demonstrations, task decomposition, and dense progress rewards have enabled research advances by providing guidance on how to assemble. But how much of the strategy must be specified? The progression from AlphaGo to AlphaGo Zero showed that RL at scale can discover superhuman strategies without prescribing how to win. AlphaNIST asks whether a sparse binary task reward and task diversity admitted by this task-agnostic reward can similarly let a robot discover how to assemble. In simulation, we train a single policy from scratch across all 20 assembly tasks on the NIST Assembly Task Board #1, reaching 98.2% overall training success without demonstrations, progress shaping, scripted primitives, or per-task tuning. The framework also trains policies to complete ten assembly pairs in a single episode without a prescribed order, with task success rewarded only when all ten pairs are simultaneously complete. The learned policies discover dexterous and planning-like behaviors: choosing grasps for later assembly, using surrounding geometry to reorient parts, and preparing one part, assembling another, then returning to finish the first without an explicit planner. For videos, see our website: https://alpha-nist.github.io/

We introduce meta-prompting, an effective scaffolding technique designed to enhance the functionality of language models (LMs). This approach transforms a single LM into a multi-faceted conductor, adept at managing and integrating multiple independent LM queries. By employing high-level instructions, meta-prompting guides the LM to break down complex tasks into smaller, more manageable subtasks. These subtasks are then handled by distinct "expert" instances of the same LM, each operating under specific, tailored instructions. Central to this process is the LM itself, in its role as the conductor, which ensures seamless communication and effective integration of the outputs from these expert models. It additionally employs its inherent critical thinking and robust verification processes to refine and authenticate the end result. This collaborative prompting approach empowers a single LM to simultaneously act as a comprehensive orchestrator and a panel of diverse experts, significantly enhancing its performance across a wide array of tasks. The zero-shot, task-agnostic nature of meta-prompting greatly simplifies user interaction by obviating the need for detailed, task-specific instructions. Furthermore, our research demonstrates the seamless integration of external tools, such as a Python interpreter, into the meta-prompting framework, thereby broadening its applicability and utility. Through rigorous experimentation with GPT-4, we establish the superiority of meta-prompting over conventional scaffolding methods: When averaged across all tasks, including the Game of 24, Checkmate-in-One, and Python Programming Puzzles, meta-prompting, augmented with a Python interpreter functionality, surpasses standard prompting by 17.1%, expert (dynamic) prompting by 17.3%, and multipersona prompting by 15.2%.

While much work on web agents emphasizes the promise of autonomously performing tasks on behalf of users, in reality, agents often fall short on complex tasks in real-world contexts and modeling user preference. This presents an opportunity for humans to collaborate with the agent and leverage the agent's capabilities effectively. We propose CowPilot, a framework supporting autonomous as well as human-agent collaborative web navigation, and evaluation across task success and task efficiency. CowPilot reduces the number of steps humans need to perform by allowing agents to propose next steps, while users are able to pause, reject, or take alternative actions. During execution, users can interleave their actions with the agent by overriding suggestions or resuming agent control when needed. We conducted case studies on five common websites and found that the human-agent collaborative mode achieves the highest success rate of 95% while requiring humans to perform only 15.2% of the total steps. Even with human interventions during task execution, the agent successfully drives up to half of task success on its own. CowPilot can serve as a useful tool for data collection and agent evaluation across websites, which we believe will enable research in how users and agents can work together. Video demonstrations are available at https://oaishi.github.io/cowpilot.html

We study behavior prompting, a paradigm that enables robots to perform new tasks at inference time given a single human demonstration, which we call a behavior prompt. To enable this capability, we present contributions in algorithm, data, and evaluation. For algorithm, we introduce Behavior Prompting Policy (BPP), an in-context visuomotor architecture that translates the behavior prompt and the current observation into robot actions. For data, we identify that task diversity is the primary driver of the prompting capability and introduce iPhUMI, a handheld manipulation interface for collecting diverse training data. For evaluation, we introduce DrawAnything and LIBERO-Gen to evaluate test-time adaptation to unseen drawing and tabletop manipulation tasks. We also demonstrate that iPhUMI serves as a practical interface for specifying behavior prompts at test time, enabling a human to command a robot via a single demonstration to complete known tasks or to define new robot capabilities. Altogether, behavior prompting provides a flexible and scalable way to teach robots new skills without the need for expensive fine-tuning. Our project website is located at https://behavior-prompting.github.io/ .

Pretrained language models can be effectively stimulated by textual prompts or demonstrations, especially in low-data scenarios. Recent works have focused on automatically searching discrete or continuous prompts or optimized verbalizers, yet studies for the demonstration are still limited. Concretely, the demonstration examples are crucial for an excellent final performance of prompt-tuning. In this paper, we propose a novel pluggable, extensible, and efficient approach named contrastive demonstration tuning, which is free of demonstration sampling. Furthermore, the proposed approach can be: (i) Plugged into any previous prompt-tuning approaches; (ii) Extended to widespread classification tasks with a large number of categories. Experimental results on 16 datasets illustrate that our method integrated with previous approaches LM-BFF and P-tuning can yield better performance. Code is available in https://github.com/zjunlp/PromptKG/tree/main/research/Demo-Tuning.

This work presents code to procedurally generate examples for the ARC training tasks. For each of the 400 tasks, an example generator following the transformation logic of the original examples was created. In effect, the assumed underlying distribution of examples for any given task was reverse engineered by implementing a means to sample from it. An attempt was made to cover an as large as reasonable space of possible examples for each task. That is, whenever the original examples of a given task may be limited in their diversity e.g. by having the dimensions of the grids, the set of symbols or number of objects constant or within tight bounds, even though the transformation does not require it, such constraints were lifted. Having access to not just a few examples per task, as the case for ARC, but instead very many, should enable a wide range of experiments that may be important stepping stones towards making leaps on the benchmark.

We tackle real-world problems with complex structures beyond the pixel-based game or simulator. We formulate it as a few-shot reinforcement learning problem where a task is characterized by a subtask graph that defines a set of subtasks and their dependencies that are unknown to the agent. Different from the previous meta-rl methods trying to directly infer the unstructured task embedding, our multi-task subtask graph inferencer (MTSGI) first infers the common high-level task structure in terms of the subtask graph from the training tasks, and use it as a prior to improve the task inference in testing. Our experiment results on 2D grid-world and complex web navigation domains show that the proposed method can learn and leverage the common underlying structure of the tasks for faster adaptation to the unseen tasks than various existing algorithms such as meta reinforcement learning, hierarchical reinforcement learning, and other heuristic agents.

Generalist robot learning remains constrained by data: large-scale, diverse, and high-quality interaction data are expensive to collect in the real world. While simulation has become a promising way for scaling up data collection, the related tasks, including simulation task design, task-aware scene generation, expert demonstration synthesis, and sim-to-real transfer, still demand substantial human effort. We present AnyTask, an automated framework that pairs massively parallel GPU simulation with foundation models to design diverse manipulation tasks and synthesize robot data. We introduce three AnyTask agents for generating expert demonstrations aiming to solve as many tasks as possible: 1) ViPR, a novel task and motion planning agent with VLM-in-the-loop Parallel Refinement; 2) ViPR-Eureka, a reinforcement learning agent with generated dense rewards and LLM-guided contact sampling; 3) ViPR-RL, a hybrid planning and learning approach that jointly produces high-quality demonstrations with only sparse rewards. We train behavior cloning policies on generated data, validate them in simulation, and deploy them directly on real robot hardware. The policies generalize to novel object poses, achieving 44% average success across a suite of real-world pick-and-place, drawer opening, contact-rich pushing, and long-horizon manipulation tasks. Our project website is at https://anytask.rai-inst.com .

Real-world robotic tasks stretch over extended horizons and encompass multiple stages. Learning long-horizon manipulation tasks, however, is a long-standing challenge, and demands decomposing the overarching task into several manageable subtasks to facilitate policy learning and generalization to unseen tasks. Prior task decomposition methods require task-specific knowledge, are computationally intensive, and cannot readily be applied to new tasks. To address these shortcomings, we propose Universal Visual Decomposer (UVD), an off-the-shelf task decomposition method for visual long horizon manipulation using pre-trained visual representations designed for robotic control. At a high level, UVD discovers subgoals by detecting phase shifts in the embedding space of the pre-trained representation. Operating purely on visual demonstrations without auxiliary information, UVD can effectively extract visual subgoals embedded in the videos, while incurring zero additional training cost on top of standard visuomotor policy training. Goal-conditioned policies learned with UVD-discovered subgoals exhibit significantly improved compositional generalization at test time to unseen tasks. Furthermore, UVD-discovered subgoals can be used to construct goal-based reward shaping that jump-starts temporally extended exploration for reinforcement learning. We extensively evaluate UVD on both simulation and real-world tasks, and in all cases, UVD substantially outperforms baselines across imitation and reinforcement learning settings on in-domain and out-of-domain task sequences alike, validating the clear advantage of automated visual task decomposition within the simple, compact UVD framework.

Robotics has long sought to develop visual-servoing robots capable of completing previously unseen long-horizon tasks. Hierarchical approaches offer a pathway for achieving this goal by executing skill combinations arranged by a task planner, with each visuomotor skill pre-trained using a specific imitation learning (IL) algorithm. However, even in simple long-horizon tasks like skill chaining, hierarchical approaches often struggle due to a problem we identify as Observation Space Shift (OSS), where the sequential execution of preceding skills causes shifts in the observation space, disrupting the performance of subsequent individually trained skill policies. To validate OSS and evaluate its impact on long-horizon tasks, we introduce BOSS (a Benchmark for Observation Space Shift). BOSS comprises three distinct challenges: "Single Predicate Shift", "Accumulated Predicate Shift", and "Skill Chaining", each designed to assess a different aspect of OSS's negative effect. We evaluated several recent popular IL algorithms on BOSS, including three Behavioral Cloning methods and the Visual Language Action model OpenVLA. Even on the simplest challenge, we observed average performance drops of 67%, 35%, 34%, and 54%, respectively, when comparing skill performance with and without OSS. Additionally, we investigate a potential solution to OSS that scales up the training data for each skill with a larger and more visually diverse set of demonstrations, with our results showing it is not sufficient to resolve OSS. The project page is: https://boss-benchmark.github.io/

Visual imitation learning provides an effective framework to learn skills from demonstrations. However, the quality of the provided demonstrations usually significantly affects the ability of an agent to acquire desired skills. Therefore, the standard visual imitation learning assumes near-optimal demonstrations, which are expensive or sometimes prohibitive to collect. Previous works propose to learn from noisy demonstrations; however, the noise is usually assumed to follow a context-independent distribution such as a uniform or gaussian distribution. In this paper, we consider another crucial yet underexplored setting -- imitation learning with task-irrelevant yet locally consistent segments in the demonstrations (e.g., wiping sweat while cutting potatoes in a cooking tutorial). We argue that such noise is common in real world data and term them "extraneous" segments. To tackle this problem, we introduce Extraneousness-Aware Imitation Learning (EIL), a self-supervised approach that learns visuomotor policies from third-person demonstrations with extraneous subsequences. EIL learns action-conditioned observation embeddings in a self-supervised manner and retrieves task-relevant observations across visual demonstrations while excluding the extraneous ones. Experimental results show that EIL outperforms strong baselines and achieves comparable policies to those trained with perfect demonstration on both simulated and real-world robot control tasks. The project page can be found at https://sites.google.com/view/eil-website.

LLMs have shown promise in replicating human-like behavior in crowdsourcing tasks that were previously thought to be exclusive to human abilities. However, current efforts focus mainly on simple atomic tasks. We explore whether LLMs can replicate more complex crowdsourcing pipelines. We find that modern LLMs can simulate some of crowdworkers' abilities in these "human computation algorithms," but the level of success is variable and influenced by requesters' understanding of LLM capabilities, the specific skills required for sub-tasks, and the optimal interaction modality for performing these sub-tasks. We reflect on human and LLMs' different sensitivities to instructions, stress the importance of enabling human-facing safeguards for LLMs, and discuss the potential of training humans and LLMs with complementary skill sets. Crucially, we show that replicating crowdsourcing pipelines offers a valuable platform to investigate (1) the relative strengths of LLMs on different tasks (by cross-comparing their performances on sub-tasks) and (2) LLMs' potential in complex tasks, where they can complete part of the tasks while leaving others to humans.

Imitation learning (IL) algorithms have shown promising results for robots to learn skills from expert demonstrations. However, they need multi-task demonstrations to be provided at once for acquiring diverse skills, which is difficult in real world. In this work we study how to realize continual imitation learning ability that empowers robots to continually learn new tasks one by one, thus reducing the burden of multi-task IL and accelerating the process of new task learning at the same time. We propose a novel trajectory generation model that employs both a generative adversarial network and a dynamics-aware prediction model to generate pseudo trajectories from all learned tasks in the new task learning process. Our experiments on both simulation and real-world manipulation tasks demonstrate the effectiveness of our method.

Improving embodied agents often focuses on optimizing the underlying model through training, while the surrounding agent harness that controls planning, context, and tool use is typically engineered. We ask whether this harness can instead improve itself directly from experience traces under sparse environmental feedback. We propose EMbodied Agent Harness Optimization (EMHO), a self-evolving framework that keeps the embodied model frozen and iteratively revises its harness by analyzing execution trajectories and prior harness history. EMHO optimizes beyond skills or recovery prompts, modifying how the agent monitors progress, uses vision tools, grounds observations, and responds to failures. To support multiple subtasks with a single harness, we introduce EMHO-Merge, which addresses trade-offs in jointly optimizing a single shared harness across subtasks by using episode-level gains and losses to guide evidence-supported refinement of when and how revised behaviors are applied. We evaluate EMHO on EmbodiedBench across navigation and manipulation tasks, and EMHO consistently improves task success for both Qwen 9B and 27B models. Qualitative analysis shows that EMHO goes beyond recovering from failures and unproductive actions to reshape how the embodied agent interprets and interacts with its environment.

Few-shot prompting is a surprisingly powerful way to use Large Language Models (LLMs) to solve various tasks. However, this approach struggles as the task complexity increases or when the individual reasoning steps of the task themselves are hard to learn, especially when embedded in more complex tasks. To address this, we propose Decomposed Prompting, a new approach to solve complex tasks by decomposing them (via prompting) into simpler sub-tasks that can be delegated to a library of prompting-based LLMs dedicated to these sub-tasks. This modular structure allows each prompt to be optimized for its specific sub-task, further decomposed if necessary, and even easily replaced with more effective prompts, trained models, or symbolic functions if desired. We show that the flexibility and modularity of Decomposed Prompting allows it to outperform prior work on few-shot prompting using GPT3. On symbolic reasoning tasks, we can further decompose sub-tasks that are hard for LLMs into even simpler solvable sub-tasks. When the complexity comes from the input length, we can recursively decompose the task into the same task but with smaller inputs. We also evaluate our approach on textual multi-step reasoning tasks: on long-context multi-hop QA task, we can more effectively teach the sub-tasks via our separate sub-tasks prompts; and on open-domain multi-hop QA, we can incorporate a symbolic information retrieval within our decomposition framework, leading to improved performance on both tasks. Datasets, Code and Prompts available at https://github.com/allenai/DecomP.

Generalist robots that can perform a range of different tasks in open-world settings must be able to not only reason about the steps needed to accomplish their goals, but also process complex instructions, prompts, and even feedback during task execution. Intricate instructions (e.g., "Could you make me a vegetarian sandwich?" or "I don't like that one") require not just the ability to physically perform the individual steps, but the ability to situate complex commands and feedback in the physical world. In this work, we describe a system that uses vision-language models in a hierarchical structure, first reasoning over complex prompts and user feedback to deduce the most appropriate next step to fulfill the task, and then performing that step with low-level actions. In contrast to direct instruction following methods that can fulfill simple commands ("pick up the cup"), our system can reason through complex prompts and incorporate situated feedback during task execution ("that's not trash"). We evaluate our system across three robotic platforms, including single-arm, dual-arm, and dual-arm mobile robots, demonstrating its ability to handle tasks such as cleaning messy tables, making sandwiches, and grocery shopping. Videos are available at https://www.pi.website/research/hirobot

Charts provide visual representations of data and are widely used for analyzing information, addressing queries, and conveying insights to others. Various chart-related downstream tasks have emerged recently, such as question-answering and summarization. A common strategy to solve these tasks is to fine-tune various models originally trained on vision tasks language. However, such task-specific models are not capable of solving a wide range of chart-related tasks, constraining their real-world applicability. To overcome these challenges, we introduce ChartInstruct: a novel chart-specific vision-language Instruction-following dataset comprising 191K instructions generated with 71K charts. We then present two distinct systems for instruction tuning on such datasets: (1) an end-to-end model that connects a vision encoder for chart understanding with a LLM; and (2) a pipeline model that employs a two-step approach to extract chart data tables and input them into the LLM. In experiments on four downstream tasks, we first show the effectiveness of our model--achieving a new set of state-of-the-art results. Further evaluation shows that our instruction-tuning approach supports a wide array of real-world chart comprehension and reasoning scenarios, thereby expanding the scope and applicability of our models to new kinds of tasks.

Chain-of-Thought (CoT) prompting reveals that large language models are capable of performing complex reasoning via intermediate steps. CoT prompting is primarily categorized into three approaches. The first approach utilizes straightforward prompts like ``Let's think step by step'' to generate a sequential thought process before yielding an answer. The second approach makes use of human-crafted, step-by-step demonstrations to guide the model's reasoning process. The third automates the generation of reasoned demonstrations with the 'Let's think step by step'.This approach sometimes leads to reasoning errors, highlighting the need to diversify demonstrations to mitigate its misleading effects. However, diverse demonstrations pose challenges for effective representations. In this work, we propose ECHO, a self-harmonized chain-of-thought prompting method. It consolidates diverse solution paths into a uniform and effective solution pattern.ECHO demonstrates the best overall performance across three reasoning domains.

Human experience in digital environments offers a vast, underexplored resource of authentic, untrimmed interactions that contain rich procedural knowledge. We introduce Demo2Tutorial, a framework that transforms this experience captured via screen recordings and interaction logs into structured, multimodal software tutorials for teaching both humans and agents. Demo2Tutorial first collects human experience via a dedicated recorder, then parses raw experience using a multimodal Action Parser to reconstruct perception, action, and intent. A Step Planner then abstracts these steps into hierarchical task graphs representing goals and steps. Finally, a Tutorial Composer transforms the parsed experience into structured, reusable image-text instructions. We evaluate the tutorial generation quality on a new benchmark derived from official software documentation. We further demonstrate that this distilled representation benefits (i) human learning, by automatically generating multimodal tutorials, and (ii) agent learning, by improving downstream GUI-agent planning and generalization. Experiments show Demo2Tutorial produces high-quality tutorials that surpass human-authored ones and significantly outperform baseline methods, while enabling both faster human task completion and improved GUI agent planning, demonstrating that structured tutorials distilled from human experience can serve as effective knowledge representations for advancing both human learning and agent capabilities. Code and data will be available at https://github.com/showlab/Demo2Tutorial.

Knowledge distillation (KD) has been shown to be highly effective in guiding a student model with a larger teacher model and achieving practical benefits in improving the computational and memory efficiency for large language models (LLMs). State-of-the-art KD methods for LLMs mostly rely on minimizing explicit distribution distance between teacher and student probability predictions. Instead of optimizing these mandatory behaviour cloning objectives, we explore an imitation learning strategy for KD of LLMs. In particular, we minimize the imitation gap by matching the action-value moments of the teacher's behavior from both on- and off-policy perspectives. To achieve this action-value moment-matching goal, we propose an adversarial training algorithm to jointly estimate the moment-matching distance and optimize the student policy to minimize it. Results from both task-agnostic instruction-following experiments and task-specific experiments demonstrate the effectiveness of our method and achieve new state-of-the-art performance.

Pre-trained large language models can efficiently interpolate human-written prompts in a natural way. Multitask prompted learning can help generalization through a diverse set of tasks at once, thus enhancing the potential for more effective downstream fine-tuning. To perform efficient multitask-inference in the same batch, parameter-efficient fine-tuning methods such as prompt tuning have been proposed. However, the existing prompt tuning methods may lack generalization. We propose SPT, a semi-parametric prompt tuning method for multitask prompted learning. The novel component of SPT is a memory bank from where memory prompts are retrieved based on discrete prompts. Extensive experiments, such as (i) fine-tuning a full language model with SPT on 31 different tasks from 8 different domains and evaluating zero-shot generalization on 9 heldout datasets under 5 NLP task categories and (ii) pretraining SPT on the GLUE datasets and evaluating fine-tuning on the SuperGLUE datasets, demonstrate effectiveness of SPT.

LLMs can now act as autonomous agents that interact with digital environments and complete specific objectives (e.g., arranging an online meeting). However, accuracy is still far from satisfactory, partly due to a lack of large-scale, direct demonstrations for digital tasks. Obtaining supervised data from humans is costly, and automatic data collection through exploration or reinforcement learning relies on complex environmental and content setup, resulting in datasets that lack comprehensive coverage of various scenarios. On the other hand, there is abundant knowledge that may indirectly assist task completion, such as online tutorials that were created for human consumption. In this work, we present Synatra, an approach that effectively transforms this indirect knowledge into direct supervision at scale. We define different types of indirect knowledge, and carefully study the available sources to obtain it, methods to encode the structure of direct demonstrations, and finally methods to transform indirect knowledge into direct demonstrations. We use 100k such synthetically-created demonstrations to finetune a 7B CodeLlama, and demonstrate that the resulting agent surpasses all comparably sized models on three web-based task benchmarks Mind2Web, MiniWoB++ and WebArena, as well as surpassing GPT-3.5 on WebArena and Mind2Web. In addition, while synthetic demonstrations prove to be only 3% the cost of human demonstrations (at $0.031 each), we show that the synthetic demonstrations can be more effective than an identical number of human demonstrations collected from limited domains.

We develop a cost-efficient neurosymbolic agent to address challenging multi-turn image editing tasks such as "Detect the bench in the image while recoloring it to pink. Also, remove the cat for a clearer view and recolor the wall to yellow.'' It combines the fast, high-level subtask planning by large language models (LLMs) with the slow, accurate, tool-use, and local A^* search per subtask to find a cost-efficient toolpath -- a sequence of calls to AI tools. To save the cost of A^* on similar subtasks, we perform inductive reasoning on previously successful toolpaths via LLMs to continuously extract/refine frequently used subroutines and reuse them as new tools for future tasks in an adaptive fast-slow planning, where the higher-level subroutines are explored first, and only when they fail, the low-level A^* search is activated. The reusable symbolic subroutines considerably save exploration cost on the same types of subtasks applied to similar images, yielding a human-like fast-slow toolpath agent "FaSTA^*'': fast subtask planning followed by rule-based subroutine selection per subtask is attempted by LLMs at first, which is expected to cover most tasks, while slow A^* search is only triggered for novel and challenging subtasks. By comparing with recent image editing approaches, we demonstrate FaSTA^* is significantly more computationally efficient while remaining competitive with the state-of-the-art baseline in terms of success rate.

Coding agents can now write, run, and debug programs with little human help. Robot tasks, however, are usually specified by a sentence that leaves out how to grasp, in what order to make contact, and what the result should look like, and an agent given only the sentence must find these details by trial and error. We introduce ENCORE, which gives the agent a few demonstrations as evidence to read rather than as training data. A deterministic builder distills each demonstration into a pack of multi-view keyframes, gripper events, frame strips, and the full trajectory. A coding agent studies the pack, writes a policy program against a fixed perception and action API, refines it iteratively over a few development rollouts, and freezes it before a sealed evaluation that never reveals the success signal. On LIBERO-PRO, the agent's first program already succeeds in half of the perturbed tasks with demonstrations and in one task without them, and the frozen programs outperform the strongest prior agentic system run with the same language model (96.3% against 89.3%). On RoboDojo tasks whose instructions leave the goal unstated, no program succeeds without demonstrations. ENCORE also runs on a real bimanual robot, learning cube handover and cup inversion from five demonstrations each.

This paper presents the overview of the AuTexTification shared task as part of the IberLEF 2023 Workshop in Iberian Languages Evaluation Forum, within the framework of the SEPLN 2023 conference. AuTexTification consists of two subtasks: for Subtask 1, participants had to determine whether a text is human-authored or has been generated by a large language model. For Subtask 2, participants had to attribute a machine-generated text to one of six different text generation models. Our AuTexTification 2023 dataset contains more than 160.000 texts across two languages (English and Spanish) and five domains (tweets, reviews, news, legal, and how-to articles). A total of 114 teams signed up to participate, of which 36 sent 175 runs, and 20 of them sent their working notes. In this overview, we present the AuTexTification dataset and task, the submitted participating systems, and the results.

We present SciRIFF (Scientific Resource for Instruction-Following and Finetuning), a dataset of 137K instruction-following demonstrations for 54 tasks covering five essential scientific literature understanding capabilities: information extraction, summarization, question answering, claim verification, and classification. SciRIFF demonstrations are notable for their long input contexts, detailed task specifications, and complex structured outputs. While instruction-following resources are available in specific domains such as clinical medicine and chemistry, SciRIFF is the first dataset focused on extracting and synthesizing information from research literature across a wide range of scientific fields. To demonstrate the utility of SciRIFF, we develop a sample-efficient strategy to adapt a general instruction-following model for science by performing additional finetuning on a mix of general-domain and SciRIFF demonstrations. In evaluations on nine held-out scientific tasks, our model -- called SciTulu -- improves over a strong LLM baseline by 28.1% and 6.5% at the 7B and 70B scales respectively, while maintaining general instruction-following performance within 2% of the baseline. We are optimistic that SciRIFF will facilitate the development and evaluation of LLMs to help researchers navigate the ever-growing body of scientific literature. We release our dataset, model checkpoints, and data processing and evaluation code to enable further research.

We introduce a pipeline that enhances a general-purpose Vision Language Model, GPT-4V(ision), by integrating observations of human actions to facilitate robotic manipulation. This system analyzes videos of humans performing tasks and creates executable robot programs that incorporate affordance insights. The computation starts by analyzing the videos with GPT-4V to convert environmental and action details into text, followed by a GPT-4-empowered task planner. In the following analyses, vision systems reanalyze the video with the task plan. Object names are grounded using an open-vocabulary object detector, while focus on the hand-object relation helps to detect the moment of grasping and releasing. This spatiotemporal grounding allows the vision systems to further gather affordance data (e.g., grasp type, way points, and body postures). Experiments across various scenarios demonstrate this method's efficacy in achieving real robots' operations from human demonstrations in a zero-shot manner. The prompts of GPT-4V/GPT-4 are available at this project page: https://microsoft.github.io/GPT4Vision-Robot-Manipulation-Prompts/

What kinds of instructional prompts are easier to follow for Language Models (LMs)? We study this question by conducting extensive empirical analysis that shed light on important features of successful instructional prompts. Specifically, we study several classes of reframing techniques for manual reformulation of prompts into more effective ones. Some examples include decomposing a complex task instruction into multiple simpler tasks or itemizing instructions into sequential steps. Our experiments compare the zero-shot and few-shot performance of LMs prompted with reframed instructions on 12 NLP tasks across 6 categories. Compared with original instructions, our reframed instructions lead to significant improvements across LMs with different sizes. For example, the same reframed prompts boost few-shot performance of GPT3-series and GPT2-series by 12.5% and 6.7% respectively averaged over all tasks. Furthermore, reframed instructions reduce the number of examples required to prompt LMs in the few-shot setting. We hope these empirically-driven techniques will pave the way towards more effective future prompting algorithms.

Every home is different, and every person likes things done in their particular way. Therefore, home robots of the future need to both reason about the sequential nature of day-to-day tasks and generalize to user's preferences. To this end, we propose a Transformer Task Planner(TTP) that learns high-level actions from demonstrations by leveraging object attribute-based representations. TTP can be pre-trained on multiple preferences and shows generalization to unseen preferences using a single demonstration as a prompt in a simulated dishwasher loading task. Further, we demonstrate real-world dish rearrangement using TTP with a Franka Panda robotic arm, prompted using a single human demonstration.

Recent studies show that large language models (LLMs) can be instructed to effectively perform zero-shot passage re-ranking, in which the results of a first stage retrieval method, such as BM25, are rated and reordered to improve relevance. In this work, we improve LLM-based re-ranking by algorithmically selecting few-shot demonstrations to include in the prompt. Our analysis investigates the conditions where demonstrations are most helpful, and shows that adding even one demonstration is significantly beneficial. We propose a novel demonstration selection strategy based on difficulty rather than the commonly used semantic similarity. Furthermore, we find that demonstrations helpful for ranking are also effective at question generation. We hope our work will spur more principled research into question generation and passage ranking.

Computer use agents (CUAs) need to plan task workflows grounded in diverse, ever-changing applications and environments, but learning is hindered by the scarcity of large-scale, high-quality training data in the target application. Existing datasets are domain-specific, static, and costly to annotate, while current synthetic data generation methods often yield simplistic or misaligned task demonstrations. To address these limitations, we introduce Watch & Learn (W&L), a framework that converts human demonstration videos readily available on the Internet into executable UI trajectories at scale. Instead of directly generating trajectories or relying on ad hoc reasoning heuristics, we cast the problem as an inverse dynamics objective: predicting the user's action from consecutive screen states. This formulation reduces manual engineering, is easier to learn, and generalizes more robustly across applications. Concretely, we develop an inverse dynamics labeling pipeline with task-aware video retrieval, generate over 53k high-quality trajectories from raw web videos, and demonstrate that these trajectories improve CUAs both as in-context demonstrations and as supervised training data. On the challenging OSWorld benchmark, UI trajectories extracted with W&L consistently enhance both general-purpose and state-of-the-art frameworks in-context, and deliver stronger gains for open-source models under supervised training. These results highlight web-scale human demonstration videos as a practical and scalable foundation for advancing CUAs towards real-world deployment.

The field of computer vision applied to videos of minimally invasive surgery is ever-growing. Workflow recognition pertains to the automated recognition of various aspects of a surgery: including which surgical steps are performed; and which surgical instruments are used. This information can later be used to assist clinicians when learning the surgery; during live surgery; and when writing operation notes. The Pituitary Vision (PitVis) 2023 Challenge tasks the community to step and instrument recognition in videos of endoscopic pituitary surgery. This is a unique task when compared to other minimally invasive surgeries due to the smaller working space, which limits and distorts vision; and higher frequency of instrument and step switching, which requires more precise model predictions. Participants were provided with 25-videos, with results presented at the MICCAI-2023 conference as part of the Endoscopic Vision 2023 Challenge in Vancouver, Canada, on 08-Oct-2023. There were 18-submissions from 9-teams across 6-countries, using a variety of deep learning models. A commonality between the top performing models was incorporating spatio-temporal and multi-task methods, with greater than 50% and 10% macro-F1-score improvement over purely spacial single-task models in step and instrument recognition respectively. The PitVis-2023 Challenge therefore demonstrates state-of-the-art computer vision models in minimally invasive surgery are transferable to a new dataset, with surgery specific techniques used to enhance performance, progressing the field further. Benchmark results are provided in the paper, and the dataset is publicly available at: https://doi.org/10.5522/04/26531686.

Although action recognition for procedural tasks has received notable attention, it has a fundamental flaw in that no measure of success for actions is provided. This limits the applicability of such systems especially within the industrial domain, since the outcome of procedural actions is often significantly more important than the mere execution. To address this limitation, we define the novel task of procedure step recognition (PSR), focusing on recognizing the correct completion and order of procedural steps. Alongside the new task, we also present the multi-modal IndustReal dataset. Unlike currently available datasets, IndustReal contains procedural errors (such as omissions) as well as execution errors. A significant part of these errors are exclusively present in the validation and test sets, making IndustReal suitable to evaluate robustness of algorithms to new, unseen mistakes. Additionally, to encourage reproducibility and allow for scalable approaches trained on synthetic data, the 3D models of all parts are publicly available. Annotations and benchmark performance are provided for action recognition and assembly state detection, as well as the new PSR task. IndustReal, along with the code and model weights, is available at: https://github.com/TimSchoonbeek/IndustReal .

The distribution of subpopulations is an important property hidden within a dataset. Uncovering and analyzing the subpopulation distribution within datasets provides a comprehensive understanding of the datasets, standing as a powerful tool beneficial to various downstream tasks, including Dataset Subpopulation Organization, Subpopulation Shift, and Slice Discovery. Despite its importance, there has been no work that systematically explores the subpopulation distribution of datasets to our knowledge. To address the limitation and solve all the mentioned tasks in a unified way, we introduce a novel concept of subpopulation structures to represent, analyze, and utilize subpopulation distributions within datasets. To characterize the structures in an interpretable manner, we propose the Subpopulation Structure Discovery with Large Language Models (SSD-LLM) framework, which employs world knowledge and instruction-following capabilities of Large Language Models (LLMs) to linguistically analyze informative image captions and summarize the structures. Furthermore, we propose complete workflows to address downstream tasks, named Task-specific Tuning, showcasing the application of the discovered structure to a spectrum of subpopulation-related tasks, including dataset subpopulation organization, subpopulation shift, and slice discovery. Furthermore, we propose complete workflows to address downstream tasks, named Task-specific Tuning, showcasing the application of the discovered structure to a spectrum of subpopulation-related tasks, including dataset subpopulation organization, subpopulation shift, and slice discovery.

Digital tool-based agents, powered by Large Language Models (LLMs), that invoke external Application Programming Interfaces (APIs) often rely on documentation to understand API functionality. However, such documentation is frequently missing, outdated, privatized, or inconsistent-hindering the development of reliable, general-purpose agents. In this work, we propose a new research direction: learning of API functionality directly from in-context demonstrations. This task is a new paradigm applicable in scenarios without documentation. Using API benchmarks, we collect demonstrations from both expert agents and from self-exploration. To understand what information demonstrations must convey for successful task completion, we extensively study how the number of demonstrations and the use of LLM-generated summaries and evaluations affect the task success rate of the API-based agent. Our experiments across 3 datasets and 6 models show that learning functionality from in-context demonstrations remains a non-trivial challenge, even for state-of-the-art LLMs. We find that providing explicit function calls and natural language critiques significantly improves the agent's task success rate due to more accurate parameter filling. We analyze failure modes, identify sources of error, and highlight key open challenges for future work in documentation-free, self-improving, API-based agents.

Building reliable robot capabilities across diverse tasks requires substantial human effort to develop and maintain skills, design rewards, and integrate perception with control. We present Reconstruct, Practice, Go Real (RPG), a framework for autonomous improvement of robot execution systems without updating model weights. RPG identifies manipulation capabilities in an offline dataset and constructs related practice tasks in simulation. During practice, RPG uses execution feedback, privileged simulator state, and available dataset videos to diagnose failures. It develops new reusable symbolic skills, refines existing skills, and revises the system prompt based on these diagnoses. Cross-task evaluation tests individual candidate changes and merged revisions before they are retained for reuse. At test time, a multimodal LLM uses the resulting system prompt and skill library to coordinate perception and robot control. On held-out initializations of 22 manipulation tasks, RPG improves task success from 28.6% after the first practice round to 95.0% after 15 rounds, outperforming all evaluated baselines, including ASPIRE (75.5%) and CaP-Agent0 powered by GPT-6 Astra Pro (60.0%). After a common calibration and hardware-adaptation procedure, the frozen system succeeds in all 30 physical trials, with ten trials on each of three tasks. Project Website: https://rpg-robot.github.io/

Customizing image generation remains a core challenge in controllable image synthesis. For single-concept generation, maintaining both identity preservation and prompt alignment is challenging. In multi-concept scenarios, relying solely on a prompt without additional conditions like layout boxes or semantic masks, often leads to identity loss and concept omission. In this paper, we introduce ShowFlow, a comprehensive framework designed to tackle these challenges. We propose ShowFlow-S for single-concept image generation, and ShowFlow-M for handling multiple concepts. ShowFlow-S introduces a KronA-WED adapter, which integrates a Kronecker adapter with weight and embedding decomposition, and employs a disentangled learning approach with a novel attention regularization objective to enhance single-concept generation. Building on this foundation, ShowFlow-M directly reuses the learned models from ShowFlow-S to support multi-concept generation without extra conditions, incorporating a Subject-Adaptive Matching Attention (SAMA) and a layout consistency strategy as the plug-and-play module. Extensive experiments and user studies validate ShowFlow's effectiveness, highlighting its potential in real-world applications like advertising and virtual dressing.

Graphical User Interfaces (GUIs) are central to human-computer interaction, yet automating complex GUI tasks remains a major challenge for autonomous agents, largely due to a lack of scalable, high-quality training data. While recordings of human demonstrations offer a rich data source, they are typically long, unstructured, and lack annotations, making them difficult for agents to learn from.To address this, we introduce ShowUI-Aloha, a comprehensive pipeline that transforms unstructured, in-the-wild human screen recordings from desktop environments into structured, actionable tasks. Our framework includes four key components: A recorder that captures screen video along with precise user interactions like mouse clicks, keystrokes, and scrolls. A learner that semantically interprets these raw interactions and the surrounding visual context, translating them into descriptive natural language captions. A planner that reads the parsed demonstrations, maintains task states, and dynamically formulates the next high-level action plan based on contextual reasoning. An executor that faithfully carries out these action plans at the OS level, performing precise clicks, drags, text inputs, and window operations with safety checks and real-time feedback. Together, these components provide a scalable solution for collecting and parsing real-world human data, demonstrating a viable path toward building general-purpose GUI agents that can learn effectively from simply observing humans.

Recent advancements in Multi-Agent Systems (MAS) powered by Large Language Models (LLMs) have demonstrated tremendous potential in diverse task scenarios. Nonetheless, existing agentic systems typically rely on predefined agent-role design spaces and static communication structures, limiting their adaptability as well as flexibility in complex interaction environments and leading to subpar performance on highly specialized and expert-level tasks. To address these issues, we introduce HALO, a multi-agent collaboration framework based on a hierarchical reasoning architecture. Specifically, we incorporate a high-level planning agent for task decomposition, mid-level role-design agents for subtask-specific agent instantiation, and low-level inference agents for subtask execution. Particularly, subtask execution is reformulated as a structured workflow search problem, where Monte Carlo Tree Search (MCTS) systematically explores the agentic action space to construct optimal reasoning trajectories. Additionally, as the majority of users lack expertise in prompt engineering, we leverage an Adaptive Prompt Refinement module to transform raw queries into task-specific prompts. Empirical evaluations on Code Generation (HumanEval), General Reasoning (MMLU), and Arithmetic Reasoning (MATH) benchmark datasets highlight the effectiveness of HALO, yielding a 14.4% average improvement over state-of-the-art baselines. Notably, HALO achieves up to 13.3% performance gain on the Moral Scenarios subject in the MMLU benchmark and up to 19.6% performance gain on the Algebra subarea in the MATH benchmark, indicating its advanced proficiency in tackling highly specialized and expert-level tasks. The code repository is available at https://github.com/23japhone/HALO.

Existing vision-language-action (VLA) models benefit from large-scale vision-language pretraining, but tend to memorize training trajectories, limiting their ability to adapt learned interactions to new task and scene configurations. To address this problem, we propose Region-Aware Interaction Networks (RAIN), which formulates a task as a sequence of goal-conditioned subtasks, each specified by an action type and a target-region mask. This formulation allows learned skills to be reused across different objects and scene layouts and composed into task sequences not seen during training. Its Target-adaptive Cross-View Encoder (TCE) conditions multi-view features on target masks and exchanges information across views, while PlanDiT predicts target-directed trajectories and actions. A Transition Head estimates subtask completion to enable automatic transitions. We also introduce a Reference-based Retargeting Strategy (RRS), which uses recorded trajectories to synthesize smooth approaches to reference interactions with alternative target regions, without collecting additional data. Experiments on LIBERO-Analogy, our new benchmark for robotic task generalization, and real-world tabletop tasks demonstrate that RAIN generalizes more robustly than existing VLA baselines.

Autoregressive (AR) video diffusion models enable low-latency streaming generation by synthesizing videos chunk by chunk with cached visual context, but this chunk-wise formulation makes temporal instruction following ambiguous. A single global prompt does not specify which sub-event should be realized in each chunk, while naively switching to step-wise prompts often leads to delayed reactions, blended step semantics, and error propagation across prompt transitions. These failures are difficult to address with supervised fine-tuning or distillation alone: SFT suffers from exposure bias, while rollout-based distillation still optimizes low-level denoising or teacher-distribution matching rather than directly enforcing action ordering and prompt-transition correctness. We address these challenges with TempAct, a planner--executor reinforcement learning framework that jointly optimizes temporal decomposition and step-conditioned execution for temporally plausible AR video generation. TempAct uses an LLM planner to explore span-aware step prompts that are executable by the video model, and trains an AR diffusion executor to follow these prompts under its own generated histories. Its key mechanism is hierarchical group exploration: candidate plans form planning groups, and each plan induces an execution group of multiple continuations from a shared visual context, enabling plan-level credit assignment for long-horizon temporal outcomes and executor-level credit assignment for prompt-switch behavior. We further design hierarchical rewards that combine plan-quality and full-video temporal feedback for the planner with local transition-level step-following rewards, aesthetic regularization, and KL constraints for the executor. Experiments on Self-Forcing and LongLive show that TempAct improves temporal consistency while preserving overall visual quality.

Large language models (LLMs) have recently been shown to deliver impressive performance in various NLP tasks. To tackle multi-step reasoning tasks, few-shot chain-of-thought (CoT) prompting includes a few manually crafted step-by-step reasoning demonstrations which enable LLMs to explicitly generate reasoning steps and improve their reasoning task accuracy. To eliminate the manual effort, Zero-shot-CoT concatenates the target problem statement with "Let's think step by step" as an input prompt to LLMs. Despite the success of Zero-shot-CoT, it still suffers from three pitfalls: calculation errors, missing-step errors, and semantic misunderstanding errors. To address the missing-step errors, we propose Plan-and-Solve (PS) Prompting. It consists of two components: first, devising a plan to divide the entire task into smaller subtasks, and then carrying out the subtasks according to the plan. To address the calculation errors and improve the quality of generated reasoning steps, we extend PS prompting with more detailed instructions and derive PS+ prompting. We evaluate our proposed prompting strategy on ten datasets across three reasoning problems. The experimental results over GPT-3 show that our proposed zero-shot prompting consistently outperforms Zero-shot-CoT across all datasets by a large margin, is comparable to or exceeds Zero-shot-Program-of-Thought Prompting, and has comparable performance with 8-shot CoT prompting on the math reasoning problem. The code can be found at https://github.com/AGI-Edgerunners/Plan-and-Solve-Prompting.

The last decade has seen a significant increase of interest in deep learning research, with many public successes that have demonstrated its potential. As such, these systems are now being incorporated into commercial products. With this comes an additional challenge: how can we build AI systems that solve tasks where there is not a crisp, well-defined specification? While multiple solutions have been proposed, in this competition we focus on one in particular: learning from human feedback. Rather than training AI systems using a predefined reward function or using a labeled dataset with a predefined set of categories, we instead train the AI system using a learning signal derived from some form of human feedback, which can evolve over time as the understanding of the task changes, or as the capabilities of the AI system improve. The MineRL BASALT competition aims to spur forward research on this important class of techniques. We design a suite of four tasks in Minecraft for which we expect it will be hard to write down hardcoded reward functions. These tasks are defined by a paragraph of natural language: for example, "create a waterfall and take a scenic picture of it", with additional clarifying details. Participants must train a separate agent for each task, using any method they want. Agents are then evaluated by humans who have read the task description. To help participants get started, we provide a dataset of human demonstrations on each of the four tasks, as well as an imitation learning baseline that leverages these demonstrations. Our hope is that this competition will improve our ability to build AI systems that do what their designers intend them to do, even when the intent cannot be easily formalized. Besides allowing AI to solve more tasks, this can also enable more effective regulation of AI systems, as well as making progress on the value alignment problem.

Agents capable of carrying out general tasks on a computer can improve efficiency and productivity by automating repetitive tasks and assisting in complex problem-solving. Ideally, such agents should be able to solve new computer tasks presented to them through natural language commands. However, previous approaches to this problem require large amounts of expert demonstrations and task-specific reward functions, both of which are impractical for new tasks. In this work, we show that a pre-trained large language model (LLM) agent can execute computer tasks guided by natural language using a simple prompting scheme where the agent Recursively Criticizes and Improves its output (RCI). The RCI approach significantly outperforms existing LLM methods for automating computer tasks and surpasses supervised learning (SL) and reinforcement learning (RL) approaches on the MiniWoB++ benchmark. We compare multiple LLMs and find that RCI with the InstructGPT-3+RLHF LLM is state-of-the-art on MiniWoB++, using only a handful of demonstrations per task rather than tens of thousands, and without a task-specific reward function. Furthermore, we demonstrate RCI prompting's effectiveness in enhancing LLMs' reasoning abilities on a suite of natural language reasoning tasks, outperforming chain of thought (CoT) prompting. We find that RCI combined with CoT performs better than either separately. Our code can be found here: https://github.com/posgnu/rci-agent.

Despite rapid progress, generalist robot policies remain brittle on complex, long-horizon tasks that comprise multiple stages or require repeated attempts and deliberation on the same underlying stage before success. Q-value functions can improve these policies by ranking candidate actions or guiding policy improvement, but learning from sparse task-level rewards entails long credit-assignment horizons, difficult Bellman backups, and broad data-coverage requirements. We introduce SeeQ (Subtask-elicited Q-functions), which instead learns Q-values for the currently active subtask. This shortens the value-prediction horizon and enables effective learning with temporal-difference (TD) objectives. During training, subtask-level annotations present in offline robot data provide the decomposition and enable learning from broad, potentially suboptimal robot datasets. To eliminate the need for human annotations or modular subtask prediction systems at test time, our Q-function architecture is trained to autoregressively predict the active subtask in natural language before estimating its value. We instantiate SeeQ using a base vision-language backbone, pretrain it on diverse open-source robot manipulation data, and finetune it on downstream tasks. Across four real-world manipulation tasks on two bimanual robot platforms, the SeeQ value function substantially improves best-of-N policy steering.

While generalist vision-language-action (VLA) models have enabled diverse open-world manipulation, real-world robotic assistance requires two critical capabilities they currently lack: personalization and reliable execution. First, executing an instruction like "make me a sandwich" requires grounding subtask decomposition in persistent user preferences rather than relying on a single generic solution. Second, reliable deployment demands explainable safety assurance that proactively prevents hazards and gracefully recovers from occasional physical failures. To address these gaps, we present CarryOn, a dual-loop harness designed to augment a frozen VLA policy. The planning loop maintains persistent user-level and scene-level context that is continually grounded against new observations and revised through interaction, enabling personalized task selection and execution grounding across conversations and changing scenes. The execution loop actively supervises policy rollouts, shielding actions from predicted hazardous contact. When execution fails, the system invokes reusable control-based recovery skills that restore task progress and are refined through reflection on earlier failures. On a real robot and in simulation, CarryOn dispatches preference-consistent subtasks across users and scenes, reduces the violation rate of an already safety-finetuned VLA from 52.6% to 6.1%, and increases recovery success from 13% to 80% when refined skills are reused.

Natural language and images are commonly used as goal representations in goal-conditioned imitation learning (IL). However, natural language can be ambiguous and images can be over-specified. In this work, we propose hand-drawn sketches as a modality for goal specification in visual imitation learning. Sketches are easy for users to provide on the fly like language, but similar to images they can also help a downstream policy to be spatially-aware and even go beyond images to disambiguate task-relevant from task-irrelevant objects. We present RT-Sketch, a goal-conditioned policy for manipulation that takes a hand-drawn sketch of the desired scene as input, and outputs actions. We train RT-Sketch on a dataset of paired trajectories and corresponding synthetically generated goal sketches. We evaluate this approach on six manipulation skills involving tabletop object rearrangements on an articulated countertop. Experimentally we find that RT-Sketch is able to perform on a similar level to image or language-conditioned agents in straightforward settings, while achieving greater robustness when language goals are ambiguous or visual distractors are present. Additionally, we show that RT-Sketch has the capacity to interpret and act upon sketches with varied levels of specificity, ranging from minimal line drawings to detailed, colored drawings. For supplementary material and videos, please refer to our website: http://rt-sketch.github.io.

A person's demonstration often serves as a key reference for others learning the same task. However, RGB video, the dominant medium for representing these demonstrations, often fails to capture fine-grained contextual cues such as intent, safety-critical environmental factors, and subtle preferences embedded in human behavior. This sensory gap fundamentally limits the ability of Vision Language Models (VLMs) to reason about why actions occur and how they should adapt to individual users. To address this, we introduce MICA (Multimodal Interactive Contextualized Assistance), a framework that improves conversational agents for task assistance by integrating eye gaze and speech cues. MICA segments demonstrations into meaningful sub-tasks and extracts keyframes and captions that capture fine-grained intent and user-specific cues, enabling richer contextual grounding for visual question answering. Evaluations on questions derived from real-time chat-assisted task replication show that multimodal cues significantly improve response quality over frame-based retrieval. Notably, gaze cues alone achieves 93% of speech performance, and their combination yields the highest accuracy. Task type determines the effectiveness of implicit (gaze) vs. explicit (speech) cues, underscoring the need for adaptable multimodal models. These results highlight the limitations of frame-based context and demonstrate the value of multimodal signals for real-world AI task assistance.

Recent advances in generative diffusion models have enabled text-controlled synthesis of realistic and diverse images with impressive quality. Despite these remarkable advances, the application of text-to-image generative models in computer vision for standard visual recognition tasks remains limited. The current de facto approach for these tasks is to design model architectures and loss functions that are tailored to the task at hand. In this paper, we develop a unified language interface for computer vision tasks that abstracts away task-specific design choices and enables task execution by following natural language instructions. Our approach involves casting multiple computer vision tasks as text-to-image generation problems. Here, the text represents an instruction describing the task, and the resulting image is a visually-encoded task output. To train our model, we pool commonly-used computer vision datasets covering a range of tasks, including segmentation, object detection, depth estimation, and classification. We then use a large language model to paraphrase prompt templates that convey the specific tasks to be conducted on each image, and through this process, we create a multi-modal and multi-task training dataset comprising input and output images along with annotated instructions. Following the InstructPix2Pix architecture, we apply instruction-tuning to a text-to-image diffusion model using our constructed dataset, steering its functionality from a generative model to an instruction-guided multi-task vision learner. Experiments demonstrate that our model, dubbed InstructCV, performs competitively compared to other generalist and task-specific vision models. Moreover, it exhibits compelling generalization capabilities to unseen data, categories, and user instructions.

We address a fundamental challenge in Reinforcement Learning from Interaction Demonstration (RLID): demonstration noise and coverage limitations. While existing data collection approaches provide valuable interaction demonstrations, they often yield sparse, disconnected, and noisy trajectories that fail to capture the full spectrum of possible skill variations and transitions. Our key insight is that despite noisy and sparse demonstrations, there exist infinite physically feasible trajectories that naturally bridge between demonstrated skills or emerge from their neighboring states, forming a continuous space of possible skill variations and transitions. Building upon this insight, we present two data augmentation techniques: a Stitched Trajectory Graph (STG) that discovers potential transitions between demonstration skills, and a State Transition Field (STF) that establishes unique connections for arbitrary states within the demonstration neighborhood. To enable effective RLID with augmented data, we develop an Adaptive Trajectory Sampling (ATS) strategy for dynamic curriculum generation and a historical encoding mechanism for memory-dependent skill learning. Our approach enables robust skill acquisition that significantly generalizes beyond the reference demonstrations. Extensive experiments across diverse interaction tasks demonstrate substantial improvements over state-of-the-art methods in terms of convergence stability, generalization capability, and recovery robustness.