Daily Papers

World Action Models (WAMs) jointly predict future actions and the evolution of the environment. At each inference, a WAM generates a chunk of actions and the robot executes a fixed prefix before replanning. We argue that this fixed execution horizon is poorly matched to execution dynamics: the chunk reliability varies across task stages, so when to replan depends on the result of accumulated execution, not on the step counts. We propose TempoWAM (Timing Execution by Monitoring Progress Online), a lightweight plug-and-play execution scheme for WAMs. A Recurrent Progress Monitor first estimates task progress from the current observation, task instruction, remaining actions, and execution history; and an Adaptive Execution Protocol then evaluates whether the chunk is advancing the task to decide if replanning is needed. To bridge the training-deployment gap, the protocol is calibrated by a task-dependent calibration factor with online adaptation. Experiments on LIBERO, RoboTwin, and real-world tasks show that TempoWAM consistently improves the efficiency-success trade-off of WAM execution. On real robots, it reduces WAM inferences by 26.9% on easy tasks while maintaining success, and improves success by 13.3 points on difficult tasks.

Recurrent reasoning models have attracted growing attention for scaling test-time computation, typically by iteratively refining latent states with shared parameters. However, these models apply each learned update with a fixed unit scale, which can be conservative when updates make persistent progress and overly aggressive when they fluctuate, limiting the benefit of additional loops. To understand how the scale should vary along the trajectory, we first analyze the sensitivity of terminal loss to recurrent update scale. We show that its temporal average admits an exact decomposition into persistent-progress and centered-fluctuation contributions. Based on this, we introduce the Trajectory Adaptive Progress-Fluctuation Scheduler (TAPS), which tracks their balance across recurrent updates and adapts the step size online. Theoretically, we establish sufficient conditions under which TAPS reduces expected terminal loss and reaches a target quality in fewer recurrent loops. Empirically, we show that TAPS improves terminal accuracy across structured reasoning tasks without retraining. By further incorporating the progress-fluctuation principle into training, TAPS yields additional accuracy gains with up to 1.56 times wall-clock speedup at matched baseline accuracy. The broad applicability of TAPS is supported by its effectiveness across diverse recurrent architectures and inference strategies. Together, these results establish update scale as complementary control axis of recurrent inference alongside architecture and depth.

Embodied agents now take on ever longer tasks. For long tasks, knowing only whether a task finally succeeds or fails says little; the steps along the way matter. Progress Reward Models (PRMs) score how far a task has come at every step, and serve as dense rewards, verifiers and monitors. Yet in long tasks the current frame alone often cannot tell how far the task has come, because progress depends on what happened before. We call this problem context-dependent progress estimation. Existing benchmarks on progress estimation mostly focus on short tasks whose progress can be read from the current observation, and whether PRMs can estimate progress when context is needed remains underexplored. We therefore build ContextProgress-Bench, with 24 manipulation tasks for 120 episodes. The benchmark covers three settings: (i) State Recall, where information needed for progress appeared earlier but is not in the current frame; (ii) Sequence Tracking, where steps follow a fixed order, so progress requires knowing which steps are done and which comes next; and (iii) Recurrence Disambiguation, where look-alike frames sit at very different progress. We then run a paired diagnosis: each PRM keeps the same input format in both runs, and in one run its instruction integrates the right context. Even PRMs that read the entire history get lost in estimating progress, yet with the right context the same five models cut their progress error by 77-82%. Embodied PRMs are thus not incapable of progress estimation, but lost without the right context. We therefore propose ProgressCompass, an autonomous agentic loop that reorients an existing PRM and uses current general-purpose VLMs to supply the context the PRM needs. Wrapped in the loop, the same frozen PRM cuts its progress error by 63% and raises its rank agreement by 76%. With such a compass, PRMs estimate progress far better on longer, more complex tasks.

Looped language models can run more iterations at test time, but additional iterations need not help them solve longer problems. For sequential state tracking, final-answer supervision does not specify how far each iteration should advance, and repeated updates can change the scale of the recurrent state. We introduce Progress-Aligned Recurrence (PAR), which trains the prediction at iteration k to match the state after the first k operations and rescales recurrent states to their first-iteration norms. On swap-S_5, a Qwen2.5-0.5B model trained on at most 32 moves achieves 95.5\% mean full-state accuracy at 512 moves, or 16times the training length, compared with 55.7\% reported for RLT and 0.8\% for explicit chain of thought on the same backbone. Controlled S_5 ablations show that removing norm anchoring reduces the extrapolation factor from 16times to below 2.2times, and replacing progress-aligned targets with final-answer supervision reduces it to at most 8times. A learned completion readout selects when to answer without a supplied stopping depth. When intermediate labels are unavailable, prefix self-distillation induces the correspondence from shorter problem prefixes using only final answers. The gains apply across sequential state-tracking tasks, establishing the task structure required for depth extrapolation. These findings support training intermediate predictions and state scale together to make additional recurrent depth useful for longer problems.

Computer-use agents provide a promising path toward general software automation because they can interact directly with arbitrary graphical user interfaces instead of relying on brittle, application-specific integrations. Despite recent advances in benchmark performance, strong computer-use agents remain expensive and slow in practice, since most systems invoke large multimodal models at nearly every interaction step. We argue that this uniform allocation of compute is fundamentally inefficient for long-horizon GUI tasks. Such trajectories are highly heterogeneous: many steps are routine and can be handled reliably by smaller, cheaper policies, while errors tend to concentrate at a relatively small number of high-risk moments. Across computer-use benchmarks, these failures repeatedly take two forms: progress stalls, where the agent loops, repeats ineffective actions, or fails to make meaningful progress, and silent semantic drift, where the agent continues taking locally plausible actions after already deviating from the user's true goal. To address this inefficiency, we propose an event-driven, step-level cascade for computer-use agents that runs a small policy by default and escalates to a stronger model only when lightweight learned monitors detect elevated risk. Our framework combines two complementary signals: a Stuck Monitor that detects degraded progress from recent reasoning-action history and triggers recovery, and a Milestone Monitor that identifies semantically meaningful checkpoints where sparse verification is most informative for catching drift. This design turns always-on frontier-model inference into adaptive, on-demand compute allocation over the course of an evolving interaction. The framework is modular and deployment-oriented: it can be layered on top of existing computer-use agents without changing the underlying agent architecture or retraining the large model.

AI agents are increasingly asked to carry out work that spans minutes, hours, or longer. Yet the default model of agent behavior is continuous action: issuing tool calls, refreshing pages, searching for alternatives, or otherwise trying to force progress. This is the wrong approach for many long-running tasks, which are better served by a strategy of sustained attention. Instead, agents should monitor an environment, notice when an external event makes progress possible, then respond promptly without wasting resources while waiting. To measure progress on this class of tasks, we introduce SentinelBench, an open-source benchmark for time-evolving monitoring tasks. SentinelBench contains 100 tasks across 10 synthetic web environments, including email, calendars, finance, professional networking, and entertainment. Each environment exposes a live web interface and replays a scripted sequence of events, requiring agents to navigate and reason about web pages whose state shifts underfoot. SentinelBench measures task completion, reaction time, and resource use, exposing the tradeoff between responsiveness and cost. We report results across three models and two browser-agent harnesses, establishing performance baselines for future comparison and demonstrating how agent design choices can dramatically impact key metrics. Together, these results show that SentinelBench distinguishes meaningful differences in agent behavior.

Periodic human activities with implicit workflows are common in manufacturing, sports, and daily life. While short-term periodic activities -- characterized by simple structures and high-contrast patterns -- have been widely studied, long-term periodic workflows with low-contrast patterns remain largely underexplored. To bridge this gap, we introduce the first benchmark comprising 580 multimodal human activity sequences featuring long-term periodic workflows. The benchmark supports three evaluation tasks aligned with real-world applications: unsupervised periodic workflow detection, task completion tracking, and procedural anomaly detection. We also propose a lightweight, training-free baseline for modeling diverse periodic workflow patterns. Experiments show that: (i) our benchmark presents significant challenges to both unsupervised periodic detection methods and zero-shot approaches based on powerful large language models (LLMs); (ii) our baseline outperforms competing methods by a substantial margin in all evaluation tasks; and (iii) in real-world applications, our baseline demonstrates deployment advantages on par with traditional supervised workflow detection approaches, eliminating the need for annotation and retraining. Our project page is https://sites.google.com/view/periodicworkflow.

Reinforcement learning with verifiable rewards (RLVR) for multi-turn agents relies on sparse terminal rewards that say little about individual steps. Within-group step comparisons depend on reliable state matching and sufficiently diverse sampled outcomes, while direct step scoring may require costly external evaluators, human annotations, or task-specific heuristics. We introduce DeltaTTG to learn a reusable progress signal through a shared progress meter, using low-cost supervision from diverse policies' recorded trajectories without task-specific progress rules. Its supervision target, Token-to-Go (TTG), the number of tokens remaining to be generated until task completion, serves as an observable proxy for remaining completion effort. During actor training, changes in the frozen meter's estimates redistribute outcome-derived advantages across steps without altering the reward, preserving each trajectory's advantage sign and token-average scale. On ALFWorld, PaperSearchQA, and BFCLv3, DeltaTTG improves the average score over GRPO by 5.7 and 7.2 points with Qwen3-4B and Llama-3.1-8B-Instruct, respectively, outperforms all compared RL baselines on average, and keeps actor-training GPU-hours close to GRPO. Further experiments show improved sample efficiency and out-of-domain performance, and support the meter's ability to distinguish step quality and guide test-time action selection across actor sizes. The code is available at https://github.com/Xuyan923r/DeltaTTG.

Automating radiology report generation can significantly alleviate radiologists' workloads. Previous research has primarily focused on realizing highly concise observations while neglecting the precise attributes that determine the severity of diseases (e.g., small pleural effusion). Since incorrect attributes will lead to imprecise radiology reports, strengthening the generation process with precise attribute modeling becomes necessary. Additionally, the temporal information contained in the historical records, which is crucial in evaluating a patient's current condition (e.g., heart size is unchanged), has also been largely disregarded. To address these issues, we propose RECAP, which generates precise and accurate radiology reports via dynamic disease progression reasoning. Specifically, RECAP first predicts the observations and progressions (i.e., spatiotemporal information) given two consecutive radiographs. It then combines the historical records, spatiotemporal information, and radiographs for report generation, where a disease progression graph and dynamic progression reasoning mechanism are devised to accurately select the attributes of each observation and progression. Extensive experiments on two publicly available datasets demonstrate the effectiveness of our model.

The fixed-size context of Transformer makes GPT models incapable of generating arbitrarily long text. In this paper, we introduce RecurrentGPT, a language-based simulacrum of the recurrence mechanism in RNNs. RecurrentGPT is built upon a large language model (LLM) such as ChatGPT and uses natural language to simulate the Long Short-Term Memory mechanism in an LSTM. At each timestep, RecurrentGPT generates a paragraph of text and updates its language-based long-short term memory stored on the hard drive and the prompt, respectively. This recurrence mechanism enables RecurrentGPT to generate texts of arbitrary length without forgetting. Since human users can easily observe and edit the natural language memories, RecurrentGPT is interpretable and enables interactive generation of long text. RecurrentGPT is an initial step towards next-generation computer-assisted writing systems beyond local editing suggestions. In addition to producing AI-generated content (AIGC), we also demonstrate the possibility of using RecurrentGPT as an interactive fiction that directly interacts with consumers. We call this usage of generative models by ``AI As Contents'' (AIAC), which we believe is the next form of conventional AIGC. We further demonstrate the possibility of using RecurrentGPT to create personalized interactive fiction that directly interacts with readers instead of interacting with writers. More broadly, RecurrentGPT demonstrates the utility of borrowing ideas from popular model designs in cognitive science and deep learning for prompting LLMs. Our code is available at https://github.com/aiwaves-cn/RecurrentGPT and an online demo is available at https://www.aiwaves.org/recurrentgpt.

Predictive business process monitoring methods exploit logs of completed cases of a process in order to make predictions about running cases thereof. Existing methods in this space are tailor-made for specific prediction tasks. Moreover, their relative accuracy is highly sensitive to the dataset at hand, thus requiring users to engage in trial-and-error and tuning when applying them in a specific setting. This paper investigates Long Short-Term Memory (LSTM) neural networks as an approach to build consistently accurate models for a wide range of predictive process monitoring tasks. First, we show that LSTMs outperform existing techniques to predict the next event of a running case and its timestamp. Next, we show how to use models for predicting the next task in order to predict the full continuation of a running case. Finally, we apply the same approach to predict the remaining time, and show that this approach outperforms existing tailor-made methods.

Over the past decade, tremendous progress has been made in Recommender Systems (RecSys) for well-known tasks such as next-item and next-basket prediction. On the other hand, the recently proposed next-period recommendation (NPR) task is not covered as much. Current works about NPR are mostly based around distinct problem formulations, methods, and proprietary datasets, making solutions difficult to reproduce. In this article, we aim to fill the gap in RecSys methods evaluation on the NPR task using publicly available datasets and (1) introduce the TTRS, a large-scale financial transactions dataset suitable for RecSys methods evaluation; (2) benchmark popular RecSys approaches on several datasets for the NPR task. When performing our analysis, we found a strong repetitive consumption pattern in several real-world datasets. With this setup, our results suggest that the repetitive nature of data is still hard to generalize for the evaluated RecSys methods, and novel item prediction performance is still questionable.

Recurrent neural networks (RNNs) are a cornerstone of sequence modeling across various scientific and industrial applications. Owing to their versatility, numerous RNN variants have been proposed over the past decade, aiming to improve the modeling of long-term dependencies and to address challenges such as vanishing and exploding gradients. However, no central library is available to test these variations, and reimplementing diverse architectures can be time-consuming and error-prone, limiting reproducibility and exploration. Here, we introduce three open-source libraries in Julia and Python that centralize numerous recurrent cell implementations and higher-level recurrent architectures. torchrecurrent, RecurrentLayers.jl, and LuxRecurrentLayers.jl offer a consistent framework for constructing and extending RNN models, providing built-in mechanisms for customization and experimentation. All packages are available under the MIT license and actively maintained on GitHub.

Next activity prediction (NAP) is a cornerstone of predictive process monitoring (PPM), enabling organizations to move from retrospective analysis to proactive process steering. The PPM field has progressed from classical machine learning through deep learning architectures such as LSTMs and Transformers to large language models (LLMs). Despite growing model complexity, no benchmark jointly compares LLMs, Transformers, LSTMs, and simple baselines in a direct sequence modeling setting for NAP. In this paper, we fill this gap with a systematic benchmark. We compare vocabulary-adapted LLMs, Transformers trained from scratch, LLM-distilled Transformers, and LSTMs against a simple counting-based argmax baseline across seven real-life event logs. Our results tell a David vs. Goliath story: pretraining confers no consistent improvement over training from scratch, model size shows little effect on performance, and on most datasets the argmax baseline matches or approaches the performance of billion-parameter LLMs.

Quantitative and dense task progress feedback is essential for robotic manipulation across data curation, policy evaluation, and reinforcement learning. Existing progress annotations often rely on sparse keyframe markings derived from subjective manual judgments, limiting their scalability and cross-task consistency, particularly in long-horizon manipulation. To overcome these challenges, we propose action-aware quantification, a unified progress specification that decomposes long-horizon trajectories into object-level subtasks via a vision-language model (VLM) and assigns weighted action credits to capture fine-grained execution dynamics. Using VLM auto-labeling and human calibration, we construct an 800+ hour training video dataset and LOOM, a long-horizon progress benchmark containing 19,618 human-calibrated evaluation frames. To model these dense progress dynamics, we introduce NimCritic, a predictive progress critic trained via Joint Video-Progress Learning. We further incorporate Historical Progress Perturbation to mitigate sequential drift, and design a contrastive Video-Progress Alignment objective that bridges asymmetric expert streams by mutually grounding intermediate visual dynamics and denoised progress trajectories. NimCritic matches or outperforms state-of-the-art process reward models (PRMs) on the established Video Progress Benchmark (VPB) and LOOM, surpassing GVL (GPT-6-Sol) on VPB by about 65% in terminal success accuracy (TSA). On the large-scale RoboArena policy evaluation benchmark, it also retrieves human-selected successful rollouts with about 97% overall recall. These results establish action-aware quantification as a scalable foundation for dense progress feedback in robotic manipulation.

LLM-based (Large Language Model) GUI (Graphical User Interface) agents can potentially reshape our daily lives significantly. However, current LLM-based GUI agents suffer from the scarcity of high-quality training data owing to the difficulties of trajectory collection and reward annotation. Existing works have been exploring LLMs to collect trajectories for imitation learning or to offer reward signals for online RL training. However, the Outcome Reward Model (ORM) used in existing works cannot provide finegrained feedback and can over-penalize the valuable steps in finally failed trajectories. To this end, we propose Progress Reward Model (ProgRM) to provide dense informative intermediate rewards by predicting a task completion progress for each step in online training. To handle the challenge of progress reward label annotation, we further design an efficient LCS-based (Longest Common Subsequence) self-annotation algorithm to discover the key steps in trajectories and assign progress labels accordingly. ProgRM is evaluated with extensive experiments and analyses. Actors trained with ProgRM outperform leading proprietary LLMs and ORM-trained actors, illustrating the effectiveness of ProgRM. The codes for experiments will be made publicly available upon acceptance.

Daily progress notes are common types in the electronic health record (EHR) where healthcare providers document the patient's daily progress and treatment plans. The EHR is designed to document all the care provided to patients, but it also enables note bloat with extraneous information that distracts from the diagnoses and treatment plans. Applications of natural language processing (NLP) in the EHR is a growing field with the majority of methods in information extraction. Few tasks use NLP methods for downstream diagnostic decision support. We introduced the 2022 National NLP Clinical Challenge (N2C2) Track 3: Progress Note Understanding - Assessment and Plan Reasoning as one step towards a new suite of tasks. The Assessment and Plan Reasoning task focuses on the most critical components of progress notes, Assessment and Plan subsections where health problems and diagnoses are contained. The goal of the task was to develop and evaluate NLP systems that automatically predict causal relations between the overall status of the patient contained in the Assessment section and its relation to each component of the Plan section which contains the diagnoses and treatment plans. The goal of the task was to identify and prioritize diagnoses as the first steps in diagnostic decision support to find the most relevant information in long documents like daily progress notes. We present the results of 2022 n2c2 Track 3 and provide a description of the data, evaluation, participation and system performance.

Sequential dynamics are a key feature of many modern recommender systems, which seek to capture the `context' of users' activities on the basis of actions they have performed recently. To capture such patterns, two approaches have proliferated: Markov Chains (MCs) and Recurrent Neural Networks (RNNs). Markov Chains assume that a user's next action can be predicted on the basis of just their last (or last few) actions, while RNNs in principle allow for longer-term semantics to be uncovered. Generally speaking, MC-based methods perform best in extremely sparse datasets, where model parsimony is critical, while RNNs perform better in denser datasets where higher model complexity is affordable. The goal of our work is to balance these two goals, by proposing a self-attention based sequential model (SASRec) that allows us to capture long-term semantics (like an RNN), but, using an attention mechanism, makes its predictions based on relatively few actions (like an MC). At each time step, SASRec seeks to identify which items are `relevant' from a user's action history, and use them to predict the next item. Extensive empirical studies show that our method outperforms various state-of-the-art sequential models (including MC/CNN/RNN-based approaches) on both sparse and dense datasets. Moreover, the model is an order of magnitude more efficient than comparable CNN/RNN-based models. Visualizations on attention weights also show how our model adaptively handles datasets with various density, and uncovers meaningful patterns in activity sequences.

Robotic learning takes place in dynamic environments with large behavior spaces. A terminal success signal only tells the robot whether the task is completed. It does not explain whether the current behavior is making progress, remaining unchanged, or undoing earlier progress. For this reason, recent studies have increasingly explored progress rewards that provide feedback during task execution. However, the current literature lacks a shared framework. Existing methods use different observations, goal specifications, output signals, supervision sources, and evaluation protocols. This makes it difficult to compare them and understand what their results actually validate. In this survey, we provide a unified view of progress reward modeling for robotic learning. We organize the field in three connected steps. We first study the interface of a progress model. This defines the problem from the outside by asking what information the model receives and what form of progress signal it produces. We then move inside the model and study the methods used to construct this signal. This reveals the different assumptions and mechanisms behind progress estimation and reward generation. Finally, we examine the data and benchmarks that support these methods. This shows how progress supervision is obtained and what different evaluations actually measure. Together, these three perspectives connect what a progress model is, how it is built, and how its quality is validated. We further summarize the main limitations of current approaches and discuss future research directions.

In this work, we propose an approach for collecting completion usage logs from the users in an IDE and using them to train a machine learning based model for ranking completion candidates. We developed a set of features that describe completion candidates and their context, and deployed their anonymized collection in the Early Access Program of IntelliJ-based IDEs. We used the logs to collect a dataset of code completions from users, and employed it to train a ranking CatBoost model. Then, we evaluated it in two settings: on a held-out set of the collected completions and in a separate A/B test on two different groups of users in the IDE. Our evaluation shows that using a simple ranking model trained on the past user behavior logs significantly improved code completion experience. Compared to the default heuristics-based ranking, our model demonstrated a decrease in the number of typing actions necessary to perform the completion in the IDE from 2.073 to 1.832. The approach adheres to privacy requirements and legal constraints, since it does not require collecting personal information, performing all the necessary anonymization on the client's side. Importantly, it can be improved continuously: implementing new features, collecting new data, and evaluating new models - this way, we have been using it in production since the end of 2020.

Despite the emergence of diffusion large language models (D-LLMs) as an alternative to autoregressive large language models (AR-LLMs), safety monitoring for D-LLMs remains largely unexplored. Unlike AR-LLMs, D-LLMs generate text through a multi-step denoising process, exposing intermediate hidden representations that may contain safety-relevant information unavailable in standard single-step monitoring setups. Motivated by the suitability of lightweight probes for always-on monitoring, we analyze which trajectory-level signals best indicate when such probes are likely to struggle. We find that the most informative signal is safety hesitation: intermediate hidden states repeatedly falling within a small margin of the probe's decision boundary. The number of such hesitation steps in D-LLM's trajectory predicts probe failure effectively, providing a proxy of sample difficulty. Building on this analysis, we propose D^2-Monitor, a bi-level safety monitor for D-LLMs. D^2-Monitor adopts a lightweight probe as an always-on monitor to jointly estimate hesitation and perform base classification. When the hesitation level exceeds a threshold, a more expressive but computationally heavier probe is activated. This dynamic routing mechanism allocates monitoring resources efficiently at test time. Evaluated on 3 datasets (WildguardMix, ToxicChat, OpenAI-Moderation) across 4 D-LLMs, D^2-Monitor achieves state-of-the-art performance with a compact parameter footprint (leq 0.85M parameters), and exhibits the best trade-off between effectiveness and efficiency relative to 8 baselines.

Learning continuously during all model lifetime is fundamental to deploy machine learning solutions robust to drifts in the data distribution. Advances in Continual Learning (CL) with recurrent neural networks could pave the way to a large number of applications where incoming data is non stationary, like natural language processing and robotics. However, the existing body of work on the topic is still fragmented, with approaches which are application-specific and whose assessment is based on heterogeneous learning protocols and datasets. In this paper, we organize the literature on CL for sequential data processing by providing a categorization of the contributions and a review of the benchmarks. We propose two new benchmarks for CL with sequential data based on existing datasets, whose characteristics resemble real-world applications. We also provide a broad empirical evaluation of CL and Recurrent Neural Networks in class-incremental scenario, by testing their ability to mitigate forgetting with a number of different strategies which are not specific to sequential data processing. Our results highlight the key role played by the sequence length and the importance of a clear specification of the CL scenario.

Long-document QA presents challenges with large-scale text and long-distance dependencies. Recent advances in Large Language Models (LLMs) enable entire documents to be processed in a single pass. However, their computational cost is significantly high. Retrieval-Augmented Generation (RAG) methods split text into smaller chunks, but they often yield inferior results and may lose global context. Recent approaches that integrate LLMs into RAG via iterative summarization either underutilize LLM capabilities or still incur high computational costs. In this paper, we combine the high accuracy of LLMs with the efficiency of RAG and propose LLM-Guided Dynamic Progress Control with Attention-Based Hierarchical Weighted Graph (PECAN). Our method introduces two key improvements: (1) LLM-Guided Dynamic Progress Control: We leverage LLMs to dynamically control the retrieval process, adjusting the amount of retrieved information based on different queries to achieve a better balance of effectiveness and efficiency. (2) Attention-Guided Retrieval: We propose a novel retrieval method that constructs a hierarchical graph where edges are derived by LLM attention weights. Experimental results demonstrate that PECAN achieves LLM-level performance while maintaining computational complexity comparable to that of RAG methods on two single-document and two multi-document QA datasets.

In lung radiotherapy, infrared cameras can track reflective objects on the chest to estimate tumor motion due to breathing, but treatment system latencies hinder radiation beam precision. Real-time recurrent learning (RTRL) is a potential solution that can learn patterns within non-stationary respiratory data but has high complexity. This study assesses the capabilities of resource-efficient online RNN algorithms, namely unbiased online recurrent optimization (UORO), sparse-1 step approximation (SnAp-1), and decoupled neural interfaces (DNI) to forecast respiratory motion during radiotherapy treatment accurately. We use time series containing the 3D positions of external markers on the chest of healthy subjects. We propose efficient implementations for SnAp-1 and DNI that compress the influence and immediate Jacobian matrices and accurately update the linear coefficients used in credit assignment estimation, respectively. Data was originally sampled at 10Hz; we resampled it at 3.33Hz and 30Hz to analyze the effect of the sampling rate on performance. We use UORO, SnAp-1, and DNI to forecast each marker's 3D position with horizons h<=2.1s (the time interval in advance for which the prediction is made) and compare them with RTRL, least mean squares, kernel support vector regression, and linear regression. RNNs trained online achieved similar or better accuracy than most previous works using larger training databases and deep learning, even though we used only the first minute of each sequence to predict motion within that exact sequence. SnAp-1 had the lowest normalized root mean square errors (nRMSEs) averaged over the horizon values considered, equal to 0.335 and 0.157, at 3.33Hz and 10.0Hz, respectively. Similarly, UORO had the lowest nRMSE at 30Hz, equal to 0.086. DNI's inference time (6.8ms per time step at 30Hz, Intel Core i7-13700 CPU) was the lowest among the RNN methods.

Large Language Models (LLMs) have shown strong promise for mining Electronic Health Records (EHRs) by reasoning over longitudinal clinical information to capture context-rich patient trajectories. However, leveraging LLMs for structured EHRs (e.g., standardized diagnosis and medication codes) presents two key challenges. First, translating time-stamped EHR sequences into plain text can obscure both temporal structure and code identities, weakening the ability to capture code co-occurrence and longitudinal regularities. Second, unlike cohort-trained predictive models that learn a shared, task-aligned representation space across patients, LLMs are often applied in a case-isolated inference setting where each patient is processed independently without leveraging population-level patterns. To address these challenges, we introduce RePrompT, a time-aware LLM framework that integrates structured EHR encoders through prompt tuning, without modifying underlying architectures. Specifically, RePrompT recurrently incorporates latent states from prior visits to preserve longitudinal information, and injects population-level information through trainable prompt tokens derived from a cohort-trained, task-aligned EHR encoder. Experiments on MIMIC-III and MIMIC-IV demonstrate that RePrompT consistently outperforms both EHR-based and LLM-based baselines across multiple clinical prediction tasks.

We present a novel prompt design for Large Language Models (LLMs) tailored to Asynchronous Time Series. Unlike regular time series, which assume values at evenly spaced time points, asynchronous time series consist of timestamped events occurring at irregular intervals, each described in natural language. Our approach effectively utilizes the rich natural language of event descriptions, allowing LLMs to benefit from their broad world knowledge for reasoning across different domains and tasks. This allows us to extend the scope of asynchronous time series analysis beyond forecasting to include tasks like anomaly detection and data imputation. We further introduce Stochastic Soft Prompting, a novel prompt-tuning mechanism that significantly improves model performance, outperforming existing fine-tuning methods such as QLoRA. Through extensive experiments on real world datasets, we demonstrate that our approach achieves state-of-the-art performance across different tasks and datasets.

Recent advances in large language models (LLMs) and vision-language models (VLMs) have enabled increasingly capable digital agents for computer use. However, real-world tasks are often long-horizon and involve evolving contexts containing accumulated observations, intermediate edits, failed attempts, and partially completed executions. Existing agents typically operate over raw interaction history, making task progress difficult to interpret, verify, and recover, which ultimately limits reliable long-horizon execution. In this paper, we argue that addressing this challenge requires explicitly structuring both the agent's state and workflow around a unified causal representation of task progress. We present StructAgent, a state-centered framework that introduces a unified state for maintaining compact, verifiable task progress and a structured workflow that regulates progress through verifier-backed state transitions. Building on this design, StructAgent further enables explicit progress checkpointing, evidence-driven task completion, targeted failure recovery, and tool-supported execution, while ensuring that all progress updates remain grounded in verification. Extensive experiments demonstrate that StructAgent consistently improves a wide range of LLM and VLM backbones on long-horizon computer-use tasks. On OSWorld-Verified, it improves Qwen3.5-9B from 27.0\% to 46.9\% success rate and Qwen3.5-27B from 31.6\% to 62.2\%, while achieving a new open-source state of the art of 78.9\% with MiniMax-M3. Moreover, the same framework generalizes beyond desktop environments to Minecraft, demonstrating the generality of our design.

Rich and context-aware activity logs facilitate user behavior analysis and health monitoring, making them a key research focus in ubiquitous computing. The remarkable semantic understanding and generation capabilities of Large Language Models (LLMs) have recently created new opportunities for activity log generation. However, existing methods continue to exhibit notable limitations in terms of accuracy, efficiency, and semantic richness. To address these challenges, we propose DailyLLM. To the best of our knowledge, this is the first log generation and summarization system that comprehensively integrates contextual activity information across four dimensions: location, motion, environment, and physiology, using only sensors commonly available on smartphones and smartwatches. To achieve this, DailyLLM introduces a lightweight LLM-based framework that integrates structured prompting with efficient feature extraction to enable high-level activity understanding. Extensive experiments demonstrate that DailyLLM outperforms state-of-the-art (SOTA) log generation methods and can be efficiently deployed on personal computers and Raspberry Pi. Utilizing only a 1.5B-parameter LLM model, DailyLLM achieves a 17% improvement in log generation BERTScore precision compared to the 70B-parameter SOTA baseline, while delivering nearly 10x faster inference speed.

Countless learning tasks require dealing with sequential data. Image captioning, speech synthesis, and music generation all require that a model produce outputs that are sequences. In other domains, such as time series prediction, video analysis, and musical information retrieval, a model must learn from inputs that are sequences. Interactive tasks, such as translating natural language, engaging in dialogue, and controlling a robot, often demand both capabilities. Recurrent neural networks (RNNs) are connectionist models that capture the dynamics of sequences via cycles in the network of nodes. Unlike standard feedforward neural networks, recurrent networks retain a state that can represent information from an arbitrarily long context window. Although recurrent neural networks have traditionally been difficult to train, and often contain millions of parameters, recent advances in network architectures, optimization techniques, and parallel computation have enabled successful large-scale learning with them. In recent years, systems based on long short-term memory (LSTM) and bidirectional (BRNN) architectures have demonstrated ground-breaking performance on tasks as varied as image captioning, language translation, and handwriting recognition. In this survey, we review and synthesize the research that over the past three decades first yielded and then made practical these powerful learning models. When appropriate, we reconcile conflicting notation and nomenclature. Our goal is to provide a self-contained explication of the state of the art together with a historical perspective and references to primary research.

Neural networks often exhibit emergent behavior, where qualitatively new capabilities arise from scaling up the amount of parameters, training data, or training steps. One approach to understanding emergence is to find continuous progress measures that underlie the seemingly discontinuous qualitative changes. We argue that progress measures can be found via mechanistic interpretability: reverse-engineering learned behaviors into their individual components. As a case study, we investigate the recently-discovered phenomenon of ``grokking'' exhibited by small transformers trained on modular addition tasks. We fully reverse engineer the algorithm learned by these networks, which uses discrete Fourier transforms and trigonometric identities to convert addition to rotation about a circle. We confirm the algorithm by analyzing the activations and weights and by performing ablations in Fourier space. Based on this understanding, we define progress measures that allow us to study the dynamics of training and split training into three continuous phases: memorization, circuit formation, and cleanup. Our results show that grokking, rather than being a sudden shift, arises from the gradual amplification of structured mechanisms encoded in the weights, followed by the later removal of memorizing components.

As spacecraft send back increasing amounts of telemetry data, improved anomaly detection systems are needed to lessen the monitoring burden placed on operations engineers and reduce operational risk. Current spacecraft monitoring systems only target a subset of anomaly types and often require costly expert knowledge to develop and maintain due to challenges involving scale and complexity. We demonstrate the effectiveness of Long Short-Term Memory (LSTMs) networks, a type of Recurrent Neural Network (RNN), in overcoming these issues using expert-labeled telemetry anomaly data from the Soil Moisture Active Passive (SMAP) satellite and the Mars Science Laboratory (MSL) rover, Curiosity. We also propose a complementary unsupervised and nonparametric anomaly thresholding approach developed during a pilot implementation of an anomaly detection system for SMAP, and offer false positive mitigation strategies along with other key improvements and lessons learned during development.

Long-horizon agents accumulate progress in persistent task state, yet repeatedly process interaction histories describing how that progress was achieved. This raises a natural question: can long-horizon context instead be organized around reusable progress rather than the history that produced it? In this paper, we introduce CarryOn, an object-oriented context runtime that organizes continuation around reusable task objects. Rather than treating compressed histories or reconstructed accounts of progress as the primary basis for continuation, CarryOn builds a context view from continuation carriers, complementary execution context, and a live tail of recent interactions. A core challenge is keeping this reusable basis valid after its surrounding history is retired: how can CarryOn update the basis without reconstructing the full representation at every fold? CarryOn maintains carrier records across folds, revising affected records against bound evidence and applicable environment checks while carrying forward unaffected records and jointly updating execution context. Experiments on OSWorld 2.0 and BrowseComp-Plus show improved gains of 5.8% and 7.0% while reducing total token usage by 51.9% and 22.9%, respectively. Project page: https://ethannju.github.io/carryon

Predictive process monitoring (PPM) leverages event logs to forecast the future of running process instances, for instance, predicting the next activity, the remaining time until case completion, or the time to the next event. While PPM research in recent years has been dominated by deep sequence models trained from scratch, such as Long Short-Term Memory (LSTM) models, foundation-model approaches---particularly large language models (LLMs)---are increasingly explored for PPM. At the same time, tabular foundation models with in-context learning capabilities offer a promising alternative but have not yet been systematically benchmarked for PPM. Thus, it remains unclear whether classical sequence-based models remain competitive in this evolving landscape. This paper compares the three modeling paradigms both conceptually and empirically through a controlled benchmark across multiple datasets and prediction tasks. The results show that sequence models consistently perform best for next activity prediction, whereas tabular foundation models are competitive on temporal tasks, with LLMs usually lagging behind despite higher cost.

Imitation learning has enabled robots to acquire complex visuomotor manipulation skills from demonstrations, but deployment failures remain a major obstacle, especially for long-horizon action-chunked policies. Once execution drifts off the demonstration manifold, these policies often continue producing locally plausible actions without recovering from the failure. Existing runtime monitors either require failure data, over-trigger under benign feature drift, or stop at failure detection without providing a recovery mechanism. We present Rewind-IL, a training-free online safeguard framework for generative action-chunked imitation policies. Rewind-IL combines a zero-shot failure detector based on Temporal Inter-chunk Discrepancy Estimate (TIDE), calibrated with split conformal prediction, with a state-respawning mechanism that returns the robot to a semantically verified safe intermediate state. Offline, a vision-language model identifies recovery checkpoints in demonstrations, and the frozen policy encoder is used to construct a compact checkpoint feature database. Online, Rewind-IL monitors self-consistency in overlapping action chunks, tracks similarity to the checkpoint library, and, upon failure, rewinds execution to the latest verified safe state before restarting inference from a clean policy state. Experiments on real-world and simulated long-horizon manipulation tasks, including transfer to flow-matching action-chunked policies, demonstrate that policy-internal consistency coupled with semantically grounded respawning offers a practical route to improved reliability in imitation learning. Supplemental materials are available at https://sjay05.github.io/rewind-il

Activity recognition is a challenging task due to the large scale of trajectory data and the need for prompt and efficient processing. Existing methods have attempted to mitigate this problem by employing traditional LSTM architectures, but these approaches often suffer from inefficiencies in processing large datasets. In response to this challenge, we propose VecLSTM, a novel framework that enhances the performance and efficiency of LSTM-based neural networks. Unlike conventional approaches, VecLSTM incorporates vectorization layers, leveraging optimized mathematical operations to process input sequences more efficiently. We have implemented VecLSTM and incorporated it into the MySQL database. To evaluate the effectiveness of VecLSTM, we compare its performance against a conventional LSTM model using a dataset comprising 1,467,652 samples with seven unique labels. Experimental results demonstrate superior accuracy and efficiency compared to the state-of-the-art, with VecLSTM achieving a validation accuracy of 85.57\%, a test accuracy of 85.47\%, and a weighted F1-score of 0.86. Furthermore, VecLSTM significantly reduces training time, offering a 26.2\% reduction compared to traditional LSTM models.

Designing dense rewards is crucial for reinforcement learning (RL), yet in robotics it often demands extensive manual effort and lacks scalability. One promising solution is to view task progress as a dense reward signal, as it quantifies the degree to which actions advance the system toward task completion over time. We present TimeRewarder, a simple yet effective reward learning method that derives progress estimation signals from passive videos, including robot demonstrations and human videos, by modeling temporal distances between frame pairs. We then demonstrate how TimeRewarder can supply step-wise proxy rewards to guide reinforcement learning. In our comprehensive experiments on ten challenging Meta-World tasks, we show that TimeRewarder dramatically improves RL for sparse-reward tasks, achieving nearly perfect success in 9/10 tasks with only 200,000 environment interactions per task. This approach outperformed previous methods and even the manually designed environment dense reward on both the final success rate and sample efficiency. Moreover, we show that TimeRewarder pretraining can exploit real-world human videos, highlighting its potential as a scalable approach to rich reward signals from diverse video sources.

Humans perform long-horizon manipulation by retaining knowledge of what earlier actions have established while continuously adapting the motion underway. By contrast, action-chunked vision-language-action (VLA) policies repeatedly replan from the current input at each query. Existing methods preserve either long-term task evidence through memory or short-term motion through action reuse and ensembling, leaving the cross-query handoff incomplete. We introduce ChainVLA, a 1.2B-parameter VLA policy that chains successive queries through a joint and revisable execution state. Progress Context combines a recurrent Working State with sparse event memory to carry observation-derived task progress, while Motion Tail feeds the preceding prediction's unexecuted continuation into state construction and action generation. Together, the two components condition a decoder that regenerates each action horizon under the latest observation, allowing the carried state to guide the next prediction without fixing it. ChainVLA reaches 62.8% average success on RMBench and 98.8% across four LIBERO suites, while removing Motion Tail or Progress Context reduces RMBench success to 11.2% and 3.0%, respectively. These asymmetric ablations are consistent with motion continuity helping preserve the observation stream from which task progress is inferred.

Computer-use agents need to capture procedural knowledge of how people use software. User telemetry offers a scalable source of this knowledge. However, learning reusable skills from these logs requires addressing three challenges: (1) Goal Underspecification, since logs do not record the goal behind each action; (2) Non-Replayability, since past activity cannot be replayed to evaluate skill updates; and (3) Interleaved Trajectories, since logs may mix several tasks without marking their boundaries. To address these, we introduce TeleTune, a framework for learning a textual skill library from offline logs without recorded goals, cannot be replayed during optimization, and may interleave tasks. TeleTune uses action-prediction errors on logged trajectories to propose library edits and keep only those that improve held-out action-prediction accuracy, which we call skill-guided progress. The learned workflows also enable retrieval of demonstrations that cover the subgoals of a new task. At test time, the agent is provided with the learned library and the workflow-based retrieved demonstrations. Experiments on WorkArena and Online-Mind2Web show that TeleTune outperforms random retrieval, Agent Workflow Memory (AWM), and their combination. We find that the best baseline varies by setting, whereas TeleTune achieves average success rates of 77.1% and 80.6%, respectively, improving over the strongest baseline on each benchmark by 6.7% and 7.7%. Under the heaviest perturbation of the WorkArena training data,TeleTune keeps the highest average success rate at 68.5%, 6.3% above the strongest baseline. Our analyses show (1) skill optimization and workflow-based retrieval are complementary, (2) optimizing on fixed logs costs 5 to 75 times fewer tokens than validating the same edits with live episodes, (3) skill-guided progress tracks the live success rate.

A Recurrent Neural Network (RNN) was used to perform video frame prediction of microbial growth for a population of two mutants of Pseudomonas aeruginosa. The RNN was trained on videos of 20 frames that were acquired using fluorescence microscopy and microfluidics. The network predicted the last 10 frames of each video, and the accuracy's of the predictions was assessed by comparing raw images, population curves, and the number and size of individual colonies. Overall, we found the predictions to be accurate using this approach. The implications this result has on designing autonomous experiments in microbiology, and the steps that can be taken to make the predictions even more accurate, are discussed.

In the past years, predictive process monitoring (PPM) techniques based on artificial neural networks have evolved as a method to monitor the future behavior of business processes. Existing approaches mostly focus on interpreting the processes as sequences, so-called traces, and feeding them to neural architectures designed to operate on sequential data such as recurrent neural networks (RNNs) or transformers. In this study, we investigate an alternative way to perform PPM: by transforming each process in its directly-follows-graph (DFG) representation we are able to apply graph neural networks (GNNs) for the prediction tasks. By this, we aim to develop models that are more suitable for complex processes that are long and contain an abundance of loops. In particular, we present different ways to create DFG representations depending on the particular GNN we use. The tested GNNs range from classical node-based to novel edge-based architectures. Further, we investigate the possibility of using multi-graphs. By these steps, we aim to design graph representations that minimize the information loss when transforming traces into graphs.

Knowledge-intensive language tasks require NLP systems to both provide the correct answer and retrieve supporting evidence for it in a given corpus. Autoregressive language models are emerging as the de-facto standard for generating answers, with newer and more powerful systems emerging at an astonishing pace. In this paper we argue that all this (and future) progress can be directly applied to the retrieval problem with minimal intervention to the models' architecture. Previous work has explored ways to partition the search space into hierarchical structures and retrieve documents by autoregressively generating their unique identifier. In this work we propose an alternative that doesn't force any structure in the search space: using all ngrams in a passage as its possible identifiers. This setup allows us to use an autoregressive model to generate and score distinctive ngrams, that are then mapped to full passages through an efficient data structure. Empirically, we show this not only outperforms prior autoregressive approaches but also leads to an average improvement of at least 10 points over more established retrieval solutions for passage-level retrieval on the KILT benchmark, establishing new state-of-the-art downstream performance on some datasets, while using a considerably lighter memory footprint than competing systems. Code and pre-trained models at https://github.com/facebookresearch/SEAL.

Neural Temporal Point Processes (TPPs) are the prevalent paradigm for modeling continuous-time event sequences, such as user activities on the web and financial transactions. In real-world applications, event data is typically received in a streaming manner, where the distribution of patterns may shift over time. Additionally, privacy and memory constraints are commonly observed in practical scenarios, further compounding the challenges. Therefore, the continuous monitoring of a TPP to learn the streaming event sequence is an important yet under-explored problem. Our work paper addresses this challenge by adopting Continual Learning (CL), which makes the model capable of continuously learning a sequence of tasks without catastrophic forgetting under realistic constraints. Correspondingly, we propose a simple yet effective framework, PromptTPPOur code is available at {\small \url{ https://github.com/yanyanSann/PromptTPP}}, by integrating the base TPP with a continuous-time retrieval prompt pool. The prompts, small learnable parameters, are stored in a memory space and jointly optimized with the base TPP, ensuring that the model learns event streams sequentially without buffering past examples or task-specific attributes. We present a novel and realistic experimental setup for modeling event streams, where PromptTPP consistently achieves state-of-the-art performance across three real user behavior datasets.

Memory management is vital for LLM agents to handle long-term interaction and personalization. Most research focuses on how to organize and use memory summary, but often overlooks the initial memory extraction stage. In this paper, we argue that existing summary-based methods have two major limitations based on the recurrent processing theory. First, summarization is "ahead-of-time", acting as a blind "feed-forward" process that misses important details because it doesn't know future tasks. Second, extraction is usually "one-off", lacking a feedback loop to verify facts, which leads to the accumulation of information loss. To address these issues, we propose proactive memory extraction (namely ProMem). Unlike static summarization, ProMem treats extraction as an iterative cognitive process. We introduce a recurrent feedback loop where the agent uses self-questioning to actively probe the dialogue history. This mechanism allows the agent to recover missing information and correct errors. Our ProMem significantly improves the completeness of the extracted memory and QA accuracy. It also achieves a superior trade-off between extraction quality and token cost.

Real-time recurrent learning (RTRL) for sequence-processing recurrent neural networks (RNNs) offers certain conceptual advantages over backpropagation through time (BPTT). RTRL requires neither caching past activations nor truncating context, and enables online learning. However, RTRL's time and space complexity make it impractical. To overcome this problem, most recent work on RTRL focuses on approximation theories, while experiments are often limited to diagnostic settings. Here we explore the practical promise of RTRL in more realistic settings. We study actor-critic methods that combine RTRL and policy gradients, and test them in several subsets of DMLab-30, ProcGen, and Atari-2600 environments. On DMLab memory tasks, our system trained on fewer than 1.2 B environmental frames is competitive with or outperforms well-known IMPALA and R2D2 baselines trained on 10 B frames. To scale to such challenging tasks, we focus on certain well-known neural architectures with element-wise recurrence, allowing for tractable RTRL without approximation. Importantly, we also discuss rarely addressed limitations of RTRL in real-world applications, such as its complexity in the multi-layer case.

Successful trajectories on difficult tasks provide valuable supervision for model improvement, but specialized harnesses introduce interventions that may be unavailable during deployment. We propose Recursive Self-Rewrite (RSR), a framework that uses one base model, Qwen-3.8-27B, to discover successful solutions under diverse harnesses and reconstruct them as training trajectories under a general harness. A planner extracts procedures into runbooks, a critic screens for verifier and solution leakage and guides recursive revision, and an executor follows qualified runbooks in fresh sandboxes. Across approximately 3K self-curated terminal tasks, three harnesses jointly solve 759 tasks, 34.3% more than the strongest individual harness in the recorded pool. RSR expands 2,001 successful source trajectories into 11,094 rewritten trajectories for supervised finetuning. Training on these trajectories outperforms both the base model and direct trajectory SFT. Compared with the base model, pass@3 increases from 57.0% to 74.2% on Terminal-Bench 2, from 1.5% to 9.1% on Terminal-Bench 4, from 39.0% to 63.0% on our self-curated Terminal-Bench Hard, and from 3.0% to 6.0% on our Software Terminal-Bench. Process reward on Long-Horizon Terminal-Bench rises from 0.21 to 0.29. These results show how diverse harness-assisted experiences can be reconstructed into reusable capabilities for a model operating under a general harness.

We introduce the Block-Recurrent Transformer, which applies a transformer layer in a recurrent fashion along a sequence, and has linear complexity with respect to sequence length. Our recurrent cell operates on blocks of tokens rather than single tokens during training, and leverages parallel computation within a block in order to make efficient use of accelerator hardware. The cell itself is strikingly simple. It is merely a transformer layer: it uses self-attention and cross-attention to efficiently compute a recurrent function over a large set of state vectors and tokens. Our design was inspired in part by LSTM cells, and it uses LSTM-style gates, but it scales the typical LSTM cell up by several orders of magnitude. Our implementation of recurrence has the same cost in both computation time and parameter count as a conventional transformer layer, but offers dramatically improved perplexity in language modeling tasks over very long sequences. Our model out-performs a long-range Transformer XL baseline by a wide margin, while running twice as fast. We demonstrate its effectiveness on PG19 (books), arXiv papers, and GitHub source code. Our code has been released as open source.

Accurately estimating task progress is critical for embodied agents to plan and execute long-horizon, multi-step tasks. Despite promising advances, existing Vision-Language Models (VLMs) based methods primarily leverage their video understanding capabilities, while neglecting their complex reasoning potential. Furthermore, processing long video trajectories with VLMs is computationally prohibitive for real-world deployment. To address these challenges, we propose the Recurrent Reasoning Vision-Language Model (R^2VLM). Our model features a recurrent reasoning framework that processes local video snippets iteratively, maintaining a global context through an evolving Chain of Thought (CoT). This CoT explicitly records task decomposition, key steps, and their completion status, enabling the model to reason about complex temporal dependencies. This design avoids the high cost of processing long videos while preserving essential reasoning capabilities. We train R^2VLM on large-scale, automatically generated datasets from ALFRED and Ego4D. Extensive experiments on progress estimation and downstream applications, including progress-enhanced policy learning, reward modeling for reinforcement learning, and proactive assistance, demonstrate that R^2VLM achieves strong performance and generalization, achieving a new state-of-the-art in long-horizon task progress estimation. The models and benchmarks are publicly available at https://huggingface.co/collections/zhangyuelin/r2vlm{huggingface}.

We introduce AutoMonitor-Bench, the first benchmark designed to systematically evaluate the reliability of LLM-based misbehavior monitors across diverse tasks and failure modes. AutoMonitor-Bench consists of 3,010 carefully annotated test samples spanning question answering, code generation, and reasoning, with paired misbehavior and benign instances. We evaluate monitors using two complementary metrics: Miss Rate (MR) and False Alarm Rate (FAR), capturing failures to detect misbehavior and oversensitivity to benign behavior, respectively. Evaluating 12 proprietary and 10 open-source LLMs, we observe substantial variability in monitoring performance and a consistent trade-off between MR and FAR, revealing an inherent safety-utility tension. To further explore the limits of monitor reliability, we construct a large-scale training corpus of 153,581 samples and fine-tune Qwen3-4B-Instruction to investigate whether training on known, relatively easy-to-construct misbehavior datasets improves monitoring performance on unseen and more implicit misbehaviors. Our results highlight the challenges of reliable, scalable misbehavior monitoring and motivate future work on task-aware designing and training strategies for LLM-based monitors.

We introduce a neural network with a recurrent attention model over a possibly large external memory. The architecture is a form of Memory Network (Weston et al., 2015) but unlike the model in that work, it is trained end-to-end, and hence requires significantly less supervision during training, making it more generally applicable in realistic settings. It can also be seen as an extension of RNNsearch to the case where multiple computational steps (hops) are performed per output symbol. The flexibility of the model allows us to apply it to tasks as diverse as (synthetic) question answering and to language modeling. For the former our approach is competitive with Memory Networks, but with less supervision. For the latter, on the Penn TreeBank and Text8 datasets our approach demonstrates comparable performance to RNNs and LSTMs. In both cases we show that the key concept of multiple computational hops yields improved results.

Recursive self-improvement is moving from theory to practice: modern systems can critique, revise, and evaluate their own outputs, yet iterative self-modification risks subtle alignment drift. We introduce SAHOO, a practical framework to monitor and control drift through three safeguards: (i) the Goal Drift Index (GDI), a learned multi-signal detector combining semantic, lexical, structural, and distributional measures; (ii) constraint preservation checks that enforce safety-critical invariants such as syntactic correctness and non-hallucination; and (iii) regression-risk quantification to flag improvement cycles that undo prior gains. Across 189 tasks in code generation, mathematical reasoning, and truthfulness, SAHOO produces substantial quality gains, including 18.3 percent improvement in code tasks and 16.8 percent in reasoning, while preserving constraints in two domains and maintaining low violations in truthfulness. Thresholds are calibrated on a small validation set of 18 tasks across three cycles. We further map the capability-alignment frontier, showing efficient early improvement cycles but rising alignment costs later and exposing domain-specific tensions such as fluency versus factuality. SAHOO therefore makes alignment preservation during recursive self-improvement measurable, deployable, and systematically validated at scale.

Remaining Useful Life (RUL) prediction is essential for industrial predictive maintenance, yet many learning-based approaches rely on extensive feature engineering or large labeled datasets to train task-specific sequence models. In this work, we introduce a lightweight learning approach, in which we leverage a frozen pretrained time-series foundation model (TSFM) and combine it with a small regression head for RUL estimation from multivariate sensor streams. More specifically, we use Chronos-2 as a frozen backbone to extract context window features and train a lightweight regression neural network for RUL prediction. Experiments on real-world industrial sensor data from two device types show that Chronos-2 features consistently improve over recurrent, convolutional, Transformer-based, and gradient-boosting baselines under the same preprocessing and evaluation protocol. We further analyze the impact of context length and find that performance improves significantly with longer histories, indicating that TSFM representation offer a practical and data-efficient alternative for RUL estimation in industrial settings.

Computer end users have spent billions of hours completing daily tasks like tabular data processing and project timeline scheduling. Most of these tasks are repetitive and error-prone, yet most end users lack the skill to automate these burdensome works. With the advent of large language models (LLMs), directing software with natural language user requests become a reachable goal. In this work, we propose a SheetCopilot agent that takes natural language task and control spreadsheet to fulfill the requirements. We propose a set of atomic actions as an abstraction of spreadsheet software functionalities. We further design a state machine-based task planning framework for LLMs to robustly interact with spreadsheets. We curate a representative dataset containing 221 spreadsheet control tasks and establish a fully automated evaluation pipeline for rigorously benchmarking the ability of LLMs in software control tasks. Our SheetCopilot correctly completes 44.3\% of tasks for a single generation, outperforming the strong code generation baseline by a wide margin. Our project page:https://sheetcopilot.github.io/.

Long-horizon agents have drawn growing attention for their ability to work autonomously -- from hours to days -- on economically valuable tasks, a capability essential to automated discovery and recursive self-improvement (RSI). Yet open-source models still struggle on long-horizon tasks, largely for lack of both training data and a working recipe, and scaling both is hard: long, complex tasks are difficult to curate and verify, and their rewards are sparse. We address both. First, we introduce Tev-Gym, the first long-horizon agent training dataset with verifiable, dense, progressive rewards -- 1,170 verified task environments across 7 domains. It is built on a latent-world-first approach that first constructs a latent world: a complete and correct hidden specification of the task domain, workflow, and expected state after each step. Each task is then progressively rendered from this specification into an agent-facing environment, enabling controllable complexity and a natural progress metric. Second, we turn this metric into a training recipe: via progress-potential reward shaping (PPRS), we convert progress into a dense per-step reward that improves training efficiency and makes otherwise-intractable tasks trainable. Training with this recipe yields Tev-27B, which achieves substantial gains on the Agents' Last Exam computing and math sciences domains (ALE-CM), matching GPT-6 Astra and Claude Opus 5 at Pass@5. Despite training only on ALE-related data, it generalizes to the Terminal-Bench (TB) 3.0 and 4.0 subsets, surpassing GLM 5.2 and Gemini 3.7 Flash, and reaches Claude Opus 4.8-level performance on middle-horizon tasks such as TB 2.1.

Recursive self-improvement (RSI) remains hard in long-horizon tasks, where growing histories obscure the task state and misalign skill invocation. We introduce Recuris, a recursive Experiential-Working Memory architecture for long-horizon agent harnesses, in which Working Memory tracks task progress and guides skill selection from Experiential Memory, grounding skill use in current needs rather than the full history. This coupling also turns execution into structured evidence that localizes failures to specific memory components. Across tasks, a fixed Meta-Agent turns that evidence into localized, validation-gated updates to Skill Memory that reshape execution and yield new evidence, forming a bounded recursive memory-evolution loop. Across four long-horizon benchmarks and ten models, Recuris improves task success in 35 of the 37 completed model-benchmark pairs, carrying frontier models to SOTA-level task success: on tau-bench it adds +17.8 points to GPT-5.6 Sol and +15.6 to Claude Opus 5, taking Opus 5 to 87.9%, and +16.6/+13.5 points on Qwen3.6-27B/35B on SkillFlow. The advantage widens as the interaction horizon grows, to +32.2 points on the longest tasks, and common long-horizon failures fall by up to 80%. These results position recursively evolving memory as a scalable foundation for RSI, enabling agents to continuously transform accumulated experience into increasingly effective long-horizon behavior. Code: https://github.com/Gen-Verse/Recuris

Large language model (LLM) agents now execute long, tool-using tasks where final outcome checks can arrive too late for intervention. Online warning requires lightweight prefix monitors over heterogeneous traces, but hand-authored event schemas are brittle and deployment-time LLM judging is costly. We introduce PrefixGuard, a trace-to-monitor framework with an offline StepView induction step followed by supervised monitor training. StepView induces deterministic typed-step adapters from raw trace samples, and the monitor learns an event abstraction and prefix-risk scorer from terminal outcomes. Across WebArena, τ^2-Bench, SkillsBench, and TerminalBench, the strongest PrefixGuard monitors reach 0.900/0.710/0.533/0.557 AUPRC. Using the strongest backend within each representation, they improve over raw-text controls by an average of +0.137 AUPRC. LLM judges remain substantially weaker under the same prefix-warning protocol. We also derive an observability ceiling on score-based area under the precision-recall curve (AUPRC) that separates monitor error from failures lacking evidence in the observed prefix. For finite-state audit, post-hoc deterministic finite automaton (DFA) extraction remains compact on WebArena and τ^2-Bench (29 and 20 states) but expands to 151 and 187 states on SkillsBench and TerminalBench. Finally, first-alert diagnostics show that strong ranking does not imply deployment utility: WebArena ranks well yet fails to support low-false-alarm alerts, whereas τ^2-Bench and TerminalBench retain more actionable early alerts. Together, these results position PrefixGuard as a practical monitor-synthesis recipe with explicit diagnostics for when prefix warnings translate into actionable interventions.

We introduce WARP (Weight-space Adaptive Recurrent Prediction), a simple yet powerful model that unifies weight-space learning with linear recurrence to redefine sequence modeling. Unlike conventional recurrent neural networks (RNNs) which collapse temporal dynamics into fixed-dimensional hidden states, WARP explicitly parametrizes its hidden state as the weights and biases of a distinct auxiliary neural network, and uses input differences to drive its recurrence. This brain-inspired formulation enables efficient gradient-free adaptation of the auxiliary network at test-time, in-context learning abilities, and seamless integration of domain-specific physical priors. Empirical validation shows that WARP matches or surpasses state-of-the-art baselines on diverse classification tasks, featuring in the top three in 5 out of 6 real-world challenging datasets. Furthermore, extensive experiments across sequential image completion, multivariate time series forecasting, and dynamical system reconstruction demonstrate its expressiveness and generalisation capabilities. Remarkably, a physics-informed variant of our model outperforms the next best model by more than 10x. Ablation studies confirm the architectural necessity of key components, solidifying weight-space linear RNNs as a transformative paradigm for adaptive machine intelligence.

In automated planning, recognising the goal of an agent from a trace of observations is an important task with many applications. The state-of-the-art approaches to goal recognition rely on the application of planning techniques, which requires a model of the domain actions and of the initial domain state (written, e.g., in PDDL). We study an alternative approach where goal recognition is formulated as a classification task addressed by machine learning. Our approach, called GRNet, is primarily aimed at making goal recognition more accurate as well as faster by learning how to solve it in a given domain. Given a planning domain specified by a set of propositions and a set of action names, the goal classification instances in the domain are solved by a Recurrent Neural Network (RNN). A run of the RNN processes a trace of observed actions to compute how likely it is that each domain proposition is part of the agent's goal, for the problem instance under considerations. These predictions are then aggregated to choose one of the candidate goals. The only information required as input of the trained RNN is a trace of action labels, each one indicating just the name of an observed action. An experimental analysis confirms that \our achieves good performance in terms of both goal classification accuracy and runtime, obtaining better performance w.r.t. a state-of-the-art goal recognition system over the considered benchmarks.

Linear Recurrence has proven to be a powerful tool for modeling long sequences efficiently. In this work, we show that existing models fail to take full advantage of its potential. Motivated by this finding, we develop GateLoop, a foundational sequence model that generalizes linear recurrent models such as S4, S5, LRU and RetNet, by employing data-controlled state transitions. Utilizing this theoretical advance, GateLoop empirically outperforms existing models for auto-regressive language modeling. Our method comes with a low-cost O(l) recurrent mode and an efficient O(l log_{2} l) parallel mode making use of highly optimized associative scan implementations. Furthermore, we derive an O(l^2) surrogate attention mode, revealing remarkable implications for Transformer and recently proposed architectures. Specifically, we prove that our approach can be interpreted as providing data-controlled relative-positional information to Attention. While many existing models solely rely on data-controlled cumulative sums for context aggregation, our findings suggest that incorporating data-controlled complex cumulative products may be a crucial step towards more powerful sequence models.

Automatically summarizing patients' main problems from daily progress notes using natural language processing methods helps to battle against information and cognitive overload in hospital settings and potentially assists providers with computerized diagnostic decision support. Problem list summarization requires a model to understand, abstract, and generate clinical documentation. In this work, we propose a new NLP task that aims to generate a list of problems in a patient's daily care plan using input from the provider's progress notes during hospitalization. We investigate the performance of T5 and BART, two state-of-the-art seq2seq transformer architectures, in solving this problem. We provide a corpus built on top of progress notes from publicly available electronic health record progress notes in the Medical Information Mart for Intensive Care (MIMIC)-III. T5 and BART are trained on general domain text, and we experiment with a data augmentation method and a domain adaptation pre-training method to increase exposure to medical vocabulary and knowledge. Evaluation methods include ROUGE, BERTScore, cosine similarity on sentence embedding, and F-score on medical concepts. Results show that T5 with domain adaptive pre-training achieves significant performance gains compared to a rule-based system and general domain pre-trained language models, indicating a promising direction for tackling the problem summarization task.

We present PhysioLLM, an interactive system that leverages large language models (LLMs) to provide personalized health understanding and exploration by integrating physiological data from wearables with contextual information. Unlike commercial health apps for wearables, our system offers a comprehensive statistical analysis component that discovers correlations and trends in user data, allowing users to ask questions in natural language and receive generated personalized insights, and guides them to develop actionable goals. As a case study, we focus on improving sleep quality, given its measurability through physiological data and its importance to general well-being. Through a user study with 24 Fitbit watch users, we demonstrate that PhysioLLM outperforms both the Fitbit App alone and a generic LLM chatbot in facilitating a deeper, personalized understanding of health data and supporting actionable steps toward personal health goals.

Truly proactive AI systems must anticipate what we will do next. This foresight demands far richer information than the sparse signals we type into our prompts -- it demands reasoning over the entire context of what we see and do. We formalize this as next action prediction (NAP): given a sequence of a user's multimodal interactions with a computer (screenshots, clicks, sensor data), predict that user's next action. Progress on this task requires both new data and modeling approaches. To scale data, we annotate longitudinal, naturalistic computer use with vision-language models. We release an open-source pipeline for performing this labeling on private infrastructure, and label over 360K actions across one month of continuous phone usage from 20 users, amounting to 1,800 hours of screen time. We then introduce LongNAP, a user model that combines parametric and in-context learning to reason over long interaction histories. LongNAP is trained via policy gradient methods to generate user-specific reasoning traces given some context; retrieve relevant traces from a library of past traces; and then apply retrieved traces in-context to predict future actions. Using an LLM-as-judge evaluation metric (0-1 similarity to ground truth), LongNAP significantly outperforms supervised finetuning and prompted baselines on held-out data (by 79% and 39% respectively). Additionally, LongNAP generalizes to held out users when trained across individuals. The space of next actions a user might take at any moment is unbounded, spanning thousands of possible outcomes. Despite this, 17.1% of LongNAP's predicted trajectories are well-aligned with what a user does next (LLM-judge score geq 0.5). This rises to 26% when we filter to highly confident predictions. In sum, we argue that learning from the full context of user behavior to anticipate user needs is now a viable task with substantial opportunity.

Converting verifier outcomes into useful policy updates and partial progress into complete task resolution is crucial for terminal agents. We present Terminal-RSI, which alternates Recursive Self-Rewrite (RSR) of verified trajectories with critic-inheriting Recursive Policy-Refine (RPR). We formulate Turn-Boundary Skip-Observation GAE (TB-GAE) to retain token-specific baselines while applying decay across interaction turns. Family Dense Reward (FDR) calibrates semantic progress across task families; Success-Prioritized Reward (SPR) separates strict success from bounded partial credit. A Warm-up Critic Model, recursive critic handoff, and stage-specific learning rates coordinate the two refinement phases. The five-stage sequence from Qwen3.8-27B base model through RSR-1, RPR-1, RSR-2, and RPR-2 yields Terminal-RSI-27B: 19.84% on Terminal-Bench 4.0, 86.52% on Terminal-Bench 2.1, 16.95% on Terminal-Bench 3.0, and 79.00% on Terminal-Bench Hard. On LHTB, process reward rises from 0.21 to 0.37 and strict completion from 0/46 to 5/46; SWR100 success doubles from 3.00% to 6.00%. By recursively coupling verified trajectory rewriting with critic-inheriting policy refinement, each retained stage consolidates discovered behaviors and progressively advances the agent from partial local repairs to strict terminal verification.

Commit messages are crucial to software development, allowing developers to track changes and collaborate effectively. Despite their utility, most commit messages lack important information since writing high-quality commit messages is tedious and time-consuming. The active research on commit message generation (CMG) has not yet led to wide adoption in practice. We argue that if we could shift the focus from commit message generation to commit message completion and use previous commit history as additional context, we could significantly improve the quality and the personal nature of the resulting commit messages. In this paper, we propose and evaluate both of these novel ideas. Since the existing datasets lack historical data, we collect and share a novel dataset called CommitChronicle, containing 10.7M commits across 20 programming languages. We use this dataset to evaluate the completion setting and the usefulness of the historical context for state-of-the-art CMG models and GPT-3.5-turbo. Our results show that in some contexts, commit message completion shows better results than generation, and that while in general GPT-3.5-turbo performs worse, it shows potential for long and detailed messages. As for the history, the results show that historical information improves the performance of CMG models in the generation task, and the performance of GPT-3.5-turbo in both generation and completion.

Deploying learned control policies is risky because policies that appear robust in simulation can confidently enter out-of-distribution (OOD) states after Sim-to-Real transfer, causing silent failures and potential hardware damage. Existing anomaly detectors often fail to meet the requirements of high-rate control, extremely low false-positive rates, and interpretable failure feedback. We present RAPT (Recurrent Anomaly Probabilistic Trajectory Model), a lightweight, self-supervised 50\,Hz deployment monitor that learns nominal execution from large-scale simulation and produces calibrated, per-dimension predictive-deviation signals online. RAPT enables OOD detection under strict false-positive constraints while localizing when and where real execution departs from nominal behavior. For post-hoc diagnosis, RAPT combines temporal saliency, joint-kinematic summaries, and LLM-based semantic reasoning to classify likely failure causes in a zero-shot setting. In simulation across four Isaac Lab tasks, RAPT improves TPR by 37% over the strongest baseline at 0.5% episode-level FPR; on hardware, it achieves 89% TPR across 78 trials with fewer false positives than high-frequency-compatible baselines, and reaches 75% semantic failure diagnosis accuracy across 21 categories on a challenging OOD subset. Project website, code, and videos: https://humphreymunn.github.io/RAPT/.

Long-horizon robotic manipulation requires dense feedback that reflects how a task advances through its procedural stages, not merely whether the final outcome is successful. Existing reward models often rely on trajectory-level success labels or time-based interpolation, which can conflate elapsed time with true task progress and therefore fail to capture unfinished steps, stagnation, and failure states. We present ProcVLM, a progress-aware vision-language model that learns procedure-grounded progress as a dense reward signal for manipulation. Rather than deriving progress from terminal outcomes or temporal proxies, ProcVLM grounds progress estimation in procedural structure and intra-stage visual change, and further adopts a reasoning-before-estimation paradigm that infers the remaining atomic actions before estimating task progress. Specifically, we construct this supervision by synthesizing frame-level subtask-semantic annotations, assigning progress budgets according to subtask structure, and distributing each budget based on intra-subtask visual change. To train ProcVLM at scale, we build a standardized procedural supervision synthesis pipeline and construct ProcCorpus-60M from 30 embodied datasets with 60M annotated frames, from which we derive ProcVQA for procedure-aware pretraining, with progress estimation as the central task alongside action segmentation and future planning. Experiments on ProcVQA and reward-model benchmarks show that ProcVLM improves embodied procedural reasoning and yields more discriminative trajectory-internal progress estimates than representative baselines, supporting its use as a dense reward model for downstream reward-guided policy optimization. Project page: https://procvlm.github.io/

Time series play a fundamental role in many domains, capturing a plethora of information about the underlying data-generating processes. When a process generates multiple synchronized signals we are faced with multidimensional time series. In this context a fundamental problem is that of motif mining, where we seek patterns repeating twice with minor variations, spanning some of the dimensions. State of the art exact solutions for this problem run in time quadratic in the length of the input time series. We provide a scalable method to find the top-k motifs in multidimensional time series with probabilistic guarantees on the quality of the results. Our algorithm runs in time subquadratic in the length of the input, and returns the exact solution with probability at least 1-δ, where δ is a user-defined parameter. The algorithm is designed to be adaptive to the input distribution, self-tuning its parameters while respecting user-defined limits on the memory to use. Our theoretical analysis is complemented by an extensive experimental evaluation, showing that our algorithm is orders of magnitude faster than the state of the art.

Recurrent Neural Networks (RNNs), and specifically a variant with Long Short-Term Memory (LSTM), are enjoying renewed interest as a result of successful applications in a wide range of machine learning problems that involve sequential data. However, while LSTMs provide exceptional results in practice, the source of their performance and their limitations remain rather poorly understood. Using character-level language models as an interpretable testbed, we aim to bridge this gap by providing an analysis of their representations, predictions and error types. In particular, our experiments reveal the existence of interpretable cells that keep track of long-range dependencies such as line lengths, quotes and brackets. Moreover, our comparative analysis with finite horizon n-gram models traces the source of the LSTM improvements to long-range structural dependencies. Finally, we provide analysis of the remaining errors and suggests areas for further study.

Large Language Models (LLMs) have the potential to automate reward engineering by leveraging their broad domain knowledge across various tasks. However, they often need many iterations of trial-and-error to generate effective reward functions. This process is costly because evaluating every sampled reward function requires completing the full policy optimization process for each function. In this paper, we introduce an LLM-driven reward generation framework that is able to produce state-of-the-art policies on the challenging Bi-DexHands benchmark with 20x fewer reward function samples than the prior state-of-the-art work. Our key insight is that we reduce the problem of generating task-specific rewards to the problem of coarsely estimating task progress. Our two-step solution leverages the task domain knowledge and the code synthesis abilities of LLMs to author progress functions that estimate task progress from a given state. Then, we use this notion of progress to discretize states, and generate count-based intrinsic rewards using the low-dimensional state space. We show that the combination of LLM-generated progress functions and count-based intrinsic rewards is essential for our performance gains, while alternatives such as generic hash-based counts or using progress directly as a reward function fall short.

We introduce RecurrentGemma, an open language model which uses Google's novel Griffin architecture. Griffin combines linear recurrences with local attention to achieve excellent performance on language. It has a fixed-sized state, which reduces memory use and enables efficient inference on long sequences. We provide a pre-trained model with 2B non-embedding parameters, and an instruction tuned variant. Both models achieve comparable performance to Gemma-2B despite being trained on fewer tokens.

Agents are deployed in applications from trip planners and stock trading to IT incident triage. In most cases, LLM agents work autonomously with minimal rule-based safeguarding, leading to cost and safety issues from irreversible actions. Recent works resolve this either by using a safeguard agent to monitor behavior or evaluating logs post-hoc. The first adds cost and latency to every step; the second delivers its verdict after the run, when tokens are burned and damage is done. To overcome this, we propose OnTrack, a streaming monitoring mechanism that compares an agent's steps and dependencies against recorded successful runs to alert users or block the agent in about a millisecond per step. We study this problem in three regimes of decreasing access: full reference access (historical runs and tool schemas), intermediate access (only tool schemas), and no prior knowledge (only step logs as generated). Expectation of OnTrack's monitoring capabilities reduces as data access drops, ranging from plan violation detection to identifying loops, stalls, and repeated tool calls. Finally, we evaluate OnTrack using SWE-bench trajectories. Based on the first 8 steps, our method ranks failing trajectories below succeeding ones better than content similarity approaches (+0.057 AUROC). With an abort policy, we save about 18% of compute that would be burned on failing runs, where 83% of interrupted runs were actually heading to failure (5 out of 6 aborts were correct).

Large-scale pre-trained models (PTMs) such as BERT and GPT have recently achieved great success in Natural Language Processing and Computer Vision domains. However, the development of PTMs on healthcare time-series data is lagging behind.This underscores the limitations of the existing transformer-based architectures, particularly their scalability to handle large-scale time series and ability to capture long-term temporal dependencies. In this study, we present Timely Generative Pre-trained Transformer (TimelyGPT). TimelyGPT employs an extrapolatable position (xPos) embedding to encode trend and periodic patterns into time-series representations. It also integrates recurrent attention and temporal convolution modules to effectively capture global-local temporal dependencies. We evaluated TimelyGPT on two large-scale healthcare time series datasets corresponding to continuous biosignals and irregularly-sampled time series, respectively. Our experiments show that during pre-training, TimelyGPT excels in learning time-series representations from continuously monitored biosignals and irregularly-sampled time series data commonly observed in longitudinal electronic health records (EHRs). In forecasting continuous biosignals, TimelyGPT achieves accurate extrapolation up to 6,000 timesteps of body temperature during the sleep stage transition, given a short look-up window (i.e., prompt) containing only 2,000 timesteps. For irregularly-sampled time series, TimelyGPT with a proposed time-specific inference demonstrates high top recall scores in predicting future diagnoses using early diagnostic records, effectively handling irregular intervals between clinical records. Together, we envision TimelyGPT to be useful in a broad spectrum of health domains, including long-term patient health state forecasting and patient risk trajectory prediction.

Coding agents keep working on runs that will fail verification, and asking a frontier model to watch for this is expensive in its own right. We introduce StopLoss, a small external monitor that learns failure recognition from completed trajectories and their verifier outcomes. The name is inspired by the stop-loss order in finance: StopLoss ends a run early when the run is likely to fail, which saves resources. Final outcomes label earlier local windows, so a fine-tuned language model can score the most recent tool steps in a single forward pass, and a threshold calibrated on successful runs turns that score into an abort decision without changing the executor. Trained on GPT-family SWE-rebench trajectories and evaluated on SWE-bench Verified and a SWE-bench Pro subset with GPT and Claude executors, StopLoss is compared against six general-purpose judges reading identical windows. Outcome supervision lifts failure prediction from near chance to a useful signal at the first check, at one to two orders of magnitude lower cost per check than any tested judge. This translates into savings: relative to completing every task, StopLoss lowers cost per retained solve by 4.5\% on Verified while preserving 99\% of successful runs, and by up to 31\% on the costlier Pro subset, reaching 48\% with a Qwen3-8B backbone, and in all four settings its cost per retained solve is below that of every judge policy. Outcome-trained small monitors can make failure recognition cheap enough for early stopping to pay for itself.

Monitoring is an important aspect of safely deploying Large Language Models (LLMs). This paper examines activation probes for detecting ``high-stakes'' interactions -- where the text indicates that the interaction might lead to significant harm -- as a critical, yet underexplored, target for such monitoring. We evaluate several probe architectures trained on synthetic data, and find them to exhibit robust generalization to diverse, out-of-distribution, real-world data. Probes' performance is comparable to that of prompted or finetuned medium-sized LLM monitors, while offering computational savings of six orders-of-magnitude. These savings are enabled by reusing activations of the model that is being monitored. Our experiments also highlight the potential of building resource-aware hierarchical monitoring systems, where probes serve as an efficient initial filter and flag cases for more expensive downstream analysis. We release our novel synthetic dataset and the codebase at https://github.com/arrrlex/models-under-pressure.

Small Language Models (SLMs) are increasingly being considered for deployment on edge devices such as laptops, enabling private, low-latency, and locally personalized applications. However, personalization requires models to adapt over time to evolving user- or task-specific data, placing them in a continual learning setting. This creates the risk of catastrophic forgetting, where learning new information degrades performance on previously learned tasks or broader model capabilities. Recent benchmarks such as TRACE have shown that continual fine-tuning can significantly degrade the general abilities of aligned large language models. In this work, we present a study for sequential LoRA personalization of SLMs. We save model checkpoints after each adaptation stage and evaluate them on current tasks, previously seen tasks, and a fixed reference set. This checkpoint-level protocol enables us to monitor task performance, forgetting, and reference set drift over time. We show that lightweight reference set distributional diagnostics can reveal model-specific instability patterns during sequential LoRA personalization of SLMs, including cases where task-level metrics alone hide harmful adaptation. We hope this can highlight new research avenues for monitoring stability of SLMs in a continual learning setting.

Drifting Models generate a sample with a single function evaluation, making them attractive for fast parallel language generation, but their one-step formulation does not support iterative refinement. We propose Recurrent Language Generation via Drifting (ReLaDrift), which uses a shared Drifting Model to generate an initial draft from noise and iteratively refine it in a continuous latent space. We train this recurrence by sampling the number of rounds and applying the drifting loss only at the final round, stopping gradients through preceding rounds so that only one round requires backpropagation. Unlike the one-step Drifting Model, whose accuracy does not improve when iterated, ReLaDrift enables a trade-off between test-time computation and generation quality, as diffusion and flow language models do. On Sudoku Hard and GSM8K, it achieves competitive or superior performance compared with these iterative-generation approaches across a range of inference budgets. Our code is available at https://github.com/Yuki-Ots/ReLaDrift

We present a scalable pipeline for automatically generating high-quality training data for web agents. In particular, a major challenge in identifying high-quality training instances is trajectory evaluation - quantifying how much progress was made towards task completion. We introduce a novel constraint-based evaluation framework that provides fine-grained assessment of progress towards task completion. This enables us to leverage partially successful trajectories, which significantly expands the amount of usable training data. We evaluate our method on a new benchmark we propose called BookingArena, which consists of complex booking tasks across 20 popular websites, and demonstrate that our distilled student model outperforms open-source approaches and matches or exceeds commercial systems, while being a significantly smaller model. Our work addresses the challenge of efficiently creating diverse, realistic web interaction datasets and provides a systematic evaluation methodology for complex structured web tasks.

Data drift is the change in model input data that is one of the key factors leading to machine learning models performance degradation over time. Monitoring drift helps detecting these issues and preventing their harmful consequences. Meaningful drift interpretation is a fundamental step towards effective re-training of the model. In this study we propose an end-to-end framework for reliable model-agnostic change-point detection and interpretation in large task-oriented dialog systems, proven effective in multiple customer deployments. We evaluate our approach and demonstrate its benefits with a novel variant of intent classification training dataset, simulating customer requests to a dialog system. We make the data publicly available.

Understanding the progress of a task allows humans to not only track what has been done but also to better plan for future goals. We demonstrate TaKSIE, a novel framework that incorporates task progress knowledge into visual subgoal generation for robotic manipulation tasks. We jointly train a recurrent network with a latent diffusion model to generate the next visual subgoal based on the robot's current observation and the input language command. At execution time, the robot leverages a visual progress representation to monitor the task progress and adaptively samples the next visual subgoal from the model to guide the manipulation policy. We train and validate our model in simulated and real-world robotic tasks, achieving state-of-the-art performance on the CALVIN manipulation benchmark. We find that the inclusion of task progress knowledge can improve the robustness of trained policy for different initial robot poses or various movement speeds during demonstrations. The project website can be found at https://live-robotics-uva.github.io/TaKSIE/ .

Memory systems are critical for role-playing agents (RPAs) to maintain long-horizon consistency. However, existing RPA memory methods (e.g., profiling) mainly rely on recurrent summarization, whose compression inevitably discards important details. To address this issue, we propose a search-based memory framework called BOOKMARKS, which actively initializes, maintains, and updates task-relevant pieces of bookmarks for the current task (e.g., character acting). A bookmark is structured as the answer to a question at a specific point in the storyline. For each current task, BOOKMARKS selects reusable existing bookmarks or initializes new ones (at storyline beginning) with useful questions. These bookmarks are then synchronized to the current story point, with their answers updated accordingly, so they can be efficiently reused in future grounding rounds. Compared with recurrent summarization, BOOKMARKS offers (1) active grounding for capturing task-specific details and (2) passive updating to avoid unnecessary computation. In implementation, BOOKMARKS supports concept, behavior, and state searches, each powered by an efficient synchronization method. BOOKMARKS significantly outperforms RPA memory baselines on 85 characters from 16 artifacts, demonstrating the effectiveness of search-based memory for RPAs.

Large language model (LLM) planners can decompose natural-language instructions and select reusable robot skills, but choosing the correct skill does not guarantee successful physical execution. This gap is especially important in humanoid loco-manipulation, where errors during approach, grasping, transport, or placement can invalidate the remainder of a long-horizon plan. We present FRAMES, a failure-aware supervisory framework for the Unitree G1 humanoid that operates above the CEER whole-body controller. A Planner Agent selects subtasks through parameterized mid-level skills, while a vision-language-model-based Monitor Agent evaluates each skill using temporal multi-view observations and structured robot and contact evidence. Detected failures stop the active skill and provide grounded feedback to a Recovery Agent. The framework further includes a Memory Module for reusing prior skill experience, and geometric grounding via depth and segmentation. We independently evaluate the monitoring module of the framework in MuJoCo using 100 trials comprising 50 failed and 50 successful executions across five tasks. The monitor detects 48 of 50 failures, correctly accepts 46 of 50 successful executions, and achieves 94.0% overall accuracy. These results provide initial evidence for the monitoring component, while end-to-end evaluation of the complete recovery loop remains ongoing.

While long-horizon mobile GUI agents typically rely on thought-action-observation loops, they struggle to separate persistent task states from transient screen observations. As execution histories grow, this entanglement imposes a severe context burden, causing agents to forget initial requirements, hallucinate progress, or repeatedly interact with stale interfaces. To address this, we introduce Task-State Representation (TSR), a training-free framework that explicitly decouples task state from sensory input. Acting as a lightweight external wrapper, TSR maintains three structured components: a global instruction summary, a dynamic progress tracker for subgoals, and a transition-aware action verifier. By continuously updating through pre- and post-action visual comparisons, TSR effectively guides the agent's reasoning without requiring architectural modifications. Experiments across four mobile GUI benchmarks validate TSR's effectiveness, yielding up to a 12 absolute point increase in success rate on complex cross-application and memory-intensive tasks.

Long-horizon LLM agents can fail quietly: they settle on one reading of the evidence early, then spend the rest of the run defending it. We call this premature commitment. Final-answer scoring misses the failure mode because it sees only the answer, not whether the process has already collapsed to a stable path. We define representational commitment as cross-run hidden-state convergence at a fixed reasoning step, and use it as an early diagnostic of trajectory consistency. On Llama-3.1-70B running ReAct on HotpotQA, step-4 hidden-state similarity predicts downstream behavioral consistency (r = -0.35, partial r = -0.45), with a localized temporal and layer-wise signature. The signal replicates across Qwen-2.5-72B and Phi-3-14B, and on StrategyQA (r = -0.83). It does not track correctness: committed-wrong and committed-correct questions are not separable in activation similarity. That boundary is central to the claim. Commitment tells us whether an agent has settled, not whether it is right. A runtime monitor detects inconsistent trajectories from hidden states at AUROC up to 0.97 (0.85--0.88 under a stricter split), and a prompting intervention cuts behavioral variance by 28% against a token-matched control while leaving accuracy statistically unchanged. We also test whether the signal can route self-consistency compute; on a harder benchmark it helps only modestly and is matched by a simpler output-based baseline. The result is a diagnostic for a hidden process failure, with clear limits rather than a general accuracy lever.

Multivariate time series data in practical applications, such as health care, geoscience, and biology, are characterized by a variety of missing values. In time series prediction and other related tasks, it has been noted that missing values and their missing patterns are often correlated with the target labels, a.k.a., informative missingness. There is very limited work on exploiting the missing patterns for effective imputation and improving prediction performance. In this paper, we develop novel deep learning models, namely GRU-D, as one of the early attempts. GRU-D is based on Gated Recurrent Unit (GRU), a state-of-the-art recurrent neural network. It takes two representations of missing patterns, i.e., masking and time interval, and effectively incorporates them into a deep model architecture so that it not only captures the long-term temporal dependencies in time series, but also utilizes the missing patterns to achieve better prediction results. Experiments of time series classification tasks on real-world clinical datasets (MIMIC-III, PhysioNet) and synthetic datasets demonstrate that our models achieve state-of-the-art performance and provides useful insights for better understanding and utilization of missing values in time series analysis.

The discharge summary is a one of critical documents in the patient journey, encompassing all events experienced during hospitalization, including multiple visits, medications, tests, surgery/procedures, and admissions/discharge. Providing a summary of the patient's progress is crucial, as it significantly influences future care and planning. Consequently, clinicians face the laborious and resource-intensive task of manually collecting, organizing, and combining all the necessary data for a discharge summary. Therefore, we propose "NOTE", which stands for "Notable generation Of patient Text summaries through an Efficient approach based on direct preference optimization". NOTE is based on Medical Information Mart for Intensive Care- III dataset and summarizes a single hospitalization of a patient. Patient events are sequentially combined and used to generate a discharge summary for each hospitalization. In the present circumstances, large language models' application programming interfaces (LLMs' APIs) are widely available, but importing and exporting medical data presents significant challenges due to privacy protection policies in healthcare institutions. Moreover, to ensure optimal performance, it is essential to implement a lightweight model for internal server or program within the hospital. Therefore, we utilized DPO and parameter efficient fine tuning (PEFT) techniques to apply a fine-tuning method that guarantees superior performance. To demonstrate the practical application of the developed NOTE, we provide a webpage-based demonstration software. In the future, we will aim to deploy the software available for actual use by clinicians in hospital. NOTE can be utilized to generate various summaries not only discharge summaries but also throughout a patient's journey, thereby alleviating the labor-intensive workload of clinicians and aiming for increased efficiency.

Estimating task progress requires reasoning over long-horizon dynamics rather than recognizing static visual content. While modern Vision-Language Models (VLMs) excel at describing what is visible, it remains unclear whether they can infer how far a task has progressed from partial observations. To this end, we introduce Progress-Bench, a benchmark for systematically evaluating progress reasoning in VLMs. Beyond benchmarking, we further explore a human-inspired two-stage progress reasoning paradigm through both training-free prompting and training-based approach based on curated dataset ProgressLM-45K. Experiments on 14 VLMs show that most models are not yet ready for task progress estimation, exhibiting sensitivity to demonstration modality and viewpoint changes, as well as poor handling of unanswerable cases. While training-free prompting that enforces structured progress reasoning yields limited and model-dependent gains, the training-based ProgressLM-3B achieves consistent improvements even at a small model scale, despite being trained on a task set fully disjoint from the evaluation tasks. Further analyses reveal characteristic error patterns and clarify when and why progress reasoning succeeds or fails.

Automated exercise repetition counting has applications across the physical fitness realm, from personal health to rehabilitation. Motivated by the ubiquity of mobile phones and the benefits of tracking physical activity, this study explored the feasibility of counting exercise repetitions in real-time, using only on-device inference, on smartphones. In this work, after providing an extensive overview of the state-of-the-art automatic exercise repetition counting methods, we introduce a deep learning based exercise repetition counting system for smartphones consisting of five components: (1) Pose estimation, (2) Thresholding, (3) Optical flow, (4) State machine, and (5) Counter. The system is then implemented via a cross-platform mobile application named P\=uioio that uses only the smartphone camera to track repetitions in real time for three standard exercises: Squats, Push-ups, and Pull-ups. The proposed system was evaluated via a dataset of pre-recorded videos of individuals exercising as well as testing by subjects exercising in real time. Evaluation results indicated the system was 98.89% accurate in real-world tests and up to 98.85% when evaluated via the pre-recorded dataset. This makes it an effective, low-cost, and convenient alternative to existing solutions since the proposed system has minimal hardware requirements without requiring any wearable or specific sensors or network connectivity.

Recurrent Neural Networks (RNNs) offer fast inference on long sequences but are hard to optimize and slow to train. Deep state-space models (SSMs) have recently been shown to perform remarkably well on long sequence modeling tasks, and have the added benefits of fast parallelizable training and RNN-like fast inference. However, while SSMs are superficially similar to RNNs, there are important differences that make it unclear where their performance boost over RNNs comes from. In this paper, we show that careful design of deep RNNs using standard signal propagation arguments can recover the impressive performance of deep SSMs on long-range reasoning tasks, while also matching their training speed. To achieve this, we analyze and ablate a series of changes to standard RNNs including linearizing and diagonalizing the recurrence, using better parameterizations and initializations, and ensuring proper normalization of the forward pass. Our results provide new insights on the origins of the impressive performance of deep SSMs, while also introducing an RNN block called the Linear Recurrent Unit that matches both their performance on the Long Range Arena benchmark and their computational efficiency.

The stable periodic patterns present in time series data serve as the foundation for conducting long-horizon forecasts. In this paper, we pioneer the exploration of explicitly modeling this periodicity to enhance the performance of models in long-term time series forecasting (LTSF) tasks. Specifically, we introduce the Residual Cycle Forecasting (RCF) technique, which utilizes learnable recurrent cycles to model the inherent periodic patterns within sequences, and then performs predictions on the residual components of the modeled cycles. Combining RCF with a Linear layer or a shallow MLP forms the simple yet powerful method proposed in this paper, called CycleNet. CycleNet achieves state-of-the-art prediction accuracy in multiple domains including electricity, weather, and energy, while offering significant efficiency advantages by reducing over 90% of the required parameter quantity. Furthermore, as a novel plug-and-play technique, the RCF can also significantly improve the prediction accuracy of existing models, including PatchTST and iTransformer. The source code is available at: https://github.com/ACAT-SCUT/CycleNet.

In recent years, attention-like mechanisms have been used to great success in the space of large language models, unlocking scaling potential to a previously unthinkable extent. "Attention Is All You Need" famously claims RNN cells are not needed in conjunction with attention. We challenge this view. In this paper, we point to existing proofs that architectures with fully parallelizable forward or backward passes cannot represent classes of problems specifically interesting for long-running agentic tasks. We further conjecture a critical time t beyond which non-recurrence-complete models fail to aggregate inputs correctly, with concrete implications for agentic systems (e.g., software engineering agents). To address this, we introduce a recurrence-complete architecture and train it on GitHub-derived action sequences. Loss follows a power law in the trained sequence length while the parameter count remains fixed. Moreover, longer-sequence training always amortizes its linearly increasing wall-time cost, yielding lower loss as a function of wall time.

In this paper we show that reporting a single performance score is insufficient to compare non-deterministic approaches. We demonstrate for common sequence tagging tasks that the seed value for the random number generator can result in statistically significant (p < 10^-4) differences for state-of-the-art systems. For two recent systems for NER, we observe an absolute difference of one percentage point F1-score depending on the selected seed value, making these systems perceived either as state-of-the-art or mediocre. Instead of publishing and reporting single performance scores, we propose to compare score distributions based on multiple executions. Based on the evaluation of 50.000 LSTM-networks for five sequence tagging tasks, we present network architectures that produce both superior performance as well as are more stable with respect to the remaining hyperparameters.

Quantization is widely used to reduce the computational and memory demands of neural-network inference. In recurrent networks, however, the quantized state is stored and returned at the next time step, so the rule used to store that state can alter subsequent computations. Here, we introduce recurrent-state write-back to denote this rule and isolate its effect in a compact GRU encoder--decoder for fluorescence lifetime imaging, a molecular imaging modality used in quantitative biological imaging. A central task is estimating two lifetime parameters, the short-lived component τ1 and the long-lived component τ2, from high-noise time-resolved fluorescence signals. Holding the trained model fixed, replacing continuous state propagation with deterministic 4-bit state storage increases estimation errors for τ1 and τ2 by approximately 70x and 300x, respectively. Failure occurs when repeated small updates remain below the write threshold, leaving the stored state nearly fixed while the network continues to propose change. Error feedback, residual memory, and direction memory carry information from these suppressed updates across time and recover accuracy without retraining. Precision sweeps show that increasing state precision can worsen a fixed recurrent solution, while matched training shows that compatibility with the state interface can be learned. To test whether this behavior extends beyond the GRU, we repeat the post-training intervention in an independently trained LSTM, where coarse write-back reproduces the failure, error feedback restores accuracy, and state-specific interventions reveal greater sensitivity of the cell state than the hidden state. Our results establish recurrent-state write-back as a key determinant of low-precision recurrent dynamics and identify the state-storage interface as a central design consideration for quantized recurrent inference.

When an LLM agent reads a confidential file, then writes a summary, then emails it externally, no single step is unsafe, but the sequence is a data leak. We call this safety drift: individually safe actions compounding into violations. Prior work has measured this problem; we predict it. SafetyDrift models agent safety trajectories as absorbing Markov chains, computing the probability that a trajectory will reach a violation within a given number of steps via closed form absorption analysis. A consequence of the monotonic state design is that every agent will eventually violate safety if left unsupervised (absorption probability 1.0 from all states), making the practical question not if but when, and motivating our focus on finite horizon prediction. Across 357 traces spanning 40 realistic tasks in four categories, we discover that "points of no return" are sharply task dependent: in communication tasks, agents that reach even a mild risk state have an 85% chance of violating safety within five steps, while in technical tasks the probability stays below 5% from any state. A lightweight monitor built on these models detects 94.7% of violations with 3.7 steps of advance warning at negligible computational cost, outperforming both keyword matching (44.7% detection, 55.9% false positive rate) and per step LLM judges (52.6% detection, 38.2% false positive rate) while running over 60,000x faster.

Knowledge tracing---where a machine models the knowledge of a student as they interact with coursework---is a well established problem in computer supported education. Though effectively modeling student knowledge would have high educational impact, the task has many inherent challenges. In this paper we explore the utility of using Recurrent Neural Networks (RNNs) to model student learning. The RNN family of models have important advantages over previous methods in that they do not require the explicit encoding of human domain knowledge, and can capture more complex representations of student knowledge. Using neural networks results in substantial improvements in prediction performance on a range of knowledge tracing datasets. Moreover the learned model can be used for intelligent curriculum design and allows straightforward interpretation and discovery of structure in student tasks. These results suggest a promising new line of research for knowledge tracing and an exemplary application task for RNNs.

Long-horizon agentic tasks require an agent to modify an environment through a sequence of tool calls, with success determined by the final state. The standard recipe assigns a single outcome reward at the end and compares trajectories sampled for the same task. As a result, a group with no successful trajectory yields no training signal, failed attempts cannot be told apart by how close they came to completion, and turns that advance the task receive the same credit as turns that only query the environment. Prior work refines the unit of comparison from the trajectory to the step, or trains a reward model to supply intermediate signal: the former still derives its signal from final success alone, and the latter estimates it with a model. We observe that the acceptance checks that decide success can also be run on intermediate states, so progress is as verifiable as the outcome. We propose ProCredit, which turns this verified progress into credit: it reruns the acceptance checks after each turn, rewards the turn by its change in progress, and uses these rewards to assign credit both across attempts at the same task and across the turns within a trajectory. Starting from Qwen3.5 base models at three scales on AppWorld, ProCredit outperforms outcome-reward baselines and progress-based baselines in task completion rate at every scale on both test sets, exceeding the strongest outcome-reward baseline by 4.1 percentage points at 4B, and results in a second environment show the same direction of improvement. Ablations show that adding the final progress to the trajectory score alone does not improve performance: the gain comes from crediting progress to the turn where it occurs.

Large Language Models (LLMs) changed the way we design and interact with software systems. Their ability to process and extract information from text has drastically improved productivity in a number of routine tasks. Developers that want to include these models in their software stack, however, face a dreadful challenge: debugging LLMs' inconsistent behavior across minor variations of the prompt. We therefore introduce two metrics for classification tasks, namely sensitivity and consistency, which are complementary to task performance. First, sensitivity measures changes of predictions across rephrasings of the prompt, and does not require access to ground truth labels. Instead, consistency measures how predictions vary across rephrasings for elements of the same class. We perform an empirical comparison of these metrics on text classification tasks, using them as guideline for understanding failure modes of the LLM. Our hope is that sensitivity and consistency will be helpful to guide prompt engineering and obtain LLMs that balance robustness with performance.

Latent recursion repeatedly processes internal representations through the same neural network. Recent work has shown this approach to be effective on structured reasoning tasks such as Sudoku and maze solving. However, whether latent recursion can support neural routing remains unclear. We introduce RELAGRAM (Recursive Latent Graph Model), a novel approach that brings latent recursion to graph combinatorial optimization. RELAGRAM encodes a capacitated vehicle routing problem (CVRP) instance as edge tokens; a compact transformer recurrently updates the latent representations of these tokens. An output head maps the answer state to an edge heatmap, from which an autoregressive decoder constructs a feasible solution. On CVRP-100 instances, the 0.53M-parameter RELAGRAM achieves gaps to a PyVRP reference of 13.4%, 9.8%, and 8.3% under greedy decoding, eightfold symmetry augmentation, and 256-candidate search, respectively. Trained only on CVRP-100, RELAGRAM generalizes zero-shot to CVRP-500 and CVRP-1000, achieving gaps of 15.6% and 21.7% under 256-candidate search. Together, these results demonstrate that latent recursion is a promising approach to neural routing.

Generative recommendation (GenRec) models typically model user behavior via full attention, but scaling to lifelong sequences is hindered by prohibitive computational costs and noise accumulation from stochastic interactions. To address these challenges, we introduce Rec2PM, a framework that compresses long user interaction histories into compact Preference Memory tokens. Unlike traditional recurrent methods that suffer from serial training, Rec2PM employs a novel self-referential teacher-forcing strategy: it leverages a global view of the history to generate reference memories, which serve as supervision targets for parallelized recurrent updates. This allows for fully parallel training while maintaining the capability for iterative updates during inference. Additionally, by representing memory as token embeddings rather than extensive KV caches, Rec2PM achieves extreme storage efficiency. Experiments on large-scale benchmarks show that Rec2PM significantly reduces inference latency and memory footprint while achieving superior accuracy compared to full-sequence models. Analysis reveals that the Preference Memory functions as a denoising Information Bottleneck, effectively filtering interaction noise to capture robust long-term interests.

Time series anomaly detection has been a perennially important topic in data science, with papers dating back to the 1950s. However, in recent years there has been an explosion of interest in this topic, much of it driven by the success of deep learning in other domains and for other time series tasks. Most of these papers test on one or more of a handful of popular benchmark datasets, created by Yahoo, Numenta, NASA, etc. In this work we make a surprising claim. The majority of the individual exemplars in these datasets suffer from one or more of four flaws. Because of these four flaws, we believe that many published comparisons of anomaly detection algorithms may be unreliable, and more importantly, much of the apparent progress in recent years may be illusionary. In addition to demonstrating these claims, with this paper we introduce the UCR Time Series Anomaly Archive. We believe that this resource will perform a similar role as the UCR Time Series Classification Archive, by providing the community with a benchmark that allows meaningful comparisons between approaches and a meaningful gauge of overall progress.

During lung radiotherapy, the position of infrared reflective objects on the chest can be recorded to estimate the tumor location. However, radiotherapy systems have a latency inherent to robot control limitations that impedes the radiation delivery precision. Prediction with online learning of recurrent neural networks (RNN) allows for adaptation to non-stationary respiratory signals, but classical methods such as RTRL and truncated BPTT are respectively slow and biased. This study investigates the capabilities of unbiased online recurrent optimization (UORO) to forecast respiratory motion and enhance safety in lung radiotherapy. We used 9 observation records of the 3D position of 3 external markers on the chest and abdomen of healthy individuals breathing during intervals from 73s to 222s. The sampling frequency was 10Hz, and the amplitudes of the recorded trajectories range from 6mm to 40mm in the superior-inferior direction. We forecast the 3D location of each marker simultaneously with a horizon value between 0.1s and 2.0s, using an RNN trained with UORO. We compare its performance with an RNN trained with RTRL, LMS, and offline linear regression. We provide closed-form expressions for quantities involved in the loss gradient calculation in UORO, thereby making its implementation efficient. Training and cross-validation were performed during the first minute of each sequence. On average over the horizon values considered and the 9 sequences, UORO achieves the lowest root-mean-square (RMS) error and maximum error among the compared algorithms. These errors are respectively equal to 1.3mm and 8.8mm, and the prediction time per time step was lower than 2.8ms (Dell Intel core i9-9900K 3.60 GHz). Linear regression has the lowest RMS error for the horizon values 0.1s and 0.2s, followed by LMS for horizon values between 0.3s and 0.5s, and UORO for horizon values greater than 0.6s.

This paper describes our submission to the shared task on word/phrase level Quality Estimation (QE) in the First Conference on Statistical Machine Translation (WMT16). The objective of the shared task was to predict if the given word/phrase is a correct/incorrect (OK/BAD) translation in the given sentence. In this paper, we propose a novel approach for word level Quality Estimation using Recurrent Neural Network Language Model (RNN-LM) architecture. RNN-LMs have been found very effective in different Natural Language Processing (NLP) applications. RNN-LM is mainly used for vector space language modeling for different NLP problems. For this task, we modify the architecture of RNN-LM. The modified system predicts a label (OK/BAD) in the slot rather than predicting the word. The input to the system is a word sequence, similar to the standard RNN-LM. The approach is language independent and requires only the translated text for QE. To estimate the phrase level quality, we use the output of the word level QE system.

Existing Open-Ended Deep Research (OEDR) systems primarily generate reports from scratch, making them inefficient for scenarios where research reports need to be continuously maintained as new information emerges. We introduce Incremental Open-Ended Deep Research (Incremental-OEDR), a research setting that treats a report as an evolving research state and incrementally updates it by preserving valid knowledge, revising outdated or incomplete content, and incorporating newly available information. To support this setting, we propose Structured Harness, which represents reports as structured collections of outlines, sections, and supporting evidence, and provides structured retrieval, a persistent structured evidence pool, and structured generation for selective report updating and evidence reuse. We further establish a temporal evaluation framework spanning ten years, with Single-Step Task and Long-Chain Task to evaluate incremental updates over both individual transitions and long-term update chains. Extensive Experiments on DeepResearch Bench and DeepConsult under both the Open-source Configuration (OC) and Proprietary Configuration (PC) show that Incremental-OEDR maintains competitive report quality while substantially improving report continuity and reducing research costs. As shown in Figure~fig:profile, it achieves up to 0.51 higher content-level ROUGE-L F1, 0.63 higher outline-level EM F1, 33\% lower token consumption, and 61\% fewer search calls than OEDR on DeepResearch Bench. For more details, please refer to our project page: https://ioedr-project.github.io/.

Recently, recurrent models such as state space models and linear attention have become popular due to their linear complexity in the sequence length. Thanks to their recurrent nature, in principle they can process arbitrarily long sequences, but their performance sometimes drops considerably beyond their training context lengths-i.e. they fail to length generalize. In this work, we provide comprehensive empirical and theoretical analysis to support the unexplored states hypothesis, which posits that models fail to length generalize when during training they are only exposed to a limited subset of the distribution of all attainable states (i.e. states that would be attained if the recurrence was applied to long sequences). Furthermore, we investigate simple training interventions that aim to increase the coverage of the states that the model is trained on, e.g. by initializing the state with Gaussian noise or with the final state of a different input sequence. With only 500 post-training steps (sim 0.1% of the pre-training budget), these interventions enable length generalization for sequences that are orders of magnitude longer than the training context (e.g. 2klongrightarrow 128k) and show improved performance in long context tasks, thus presenting a simple and efficient way to enable robust length generalization in general recurrent models.

Linear RNNs offer linear-time sequence processing and constant-memory decoding, but their fixed-size recurrent states must accommodate all past key--value associations. Existing forgetting mechanisms and Delta Rule updates reduce interference by selectively clearing or correcting the state, yet earlier associations can still become difficult to retrieve. We introduce CyFA (Cyclic Flow Attention), a Linear RNN with relative-time-partitioned memory. At each step, a learned clock controls the cyclic transport applied jointly to the key and value states before the current key--value pair enters the age-zero slot, thereby organizing stored associations across relative-time slots. We further derive an exact change to absolute-clock coordinates that expresses CyFA as two scalar-decay linear attention recurrences and enables efficient chunk-wise training. Across 400M--1.4B pretraining experiments with matched recurrent-state sizes, CyFA improves recall-intensive performance while maintaining competitive language modeling and high computational efficiency. At 400M, CyFA outperforms KDA on FDA (42.60 vs. 26.07) while requiring only 46.7% and 48.3% of KDA's forward and backward core-operator execution times, respectively. Our code is publicly available at https://github.com/Chyxx/CyclicFlowAttention{this https URL}.

RNN-based methods have faced challenges in the Long-term Time Series Forecasting (LTSF) domain when dealing with excessively long look-back windows and forecast horizons. Consequently, the dominance in this domain has shifted towards Transformer, MLP, and CNN approaches. The substantial number of recurrent iterations are the fundamental reasons behind the limitations of RNNs in LTSF. To address these issues, we propose two novel strategies to reduce the number of iterations in RNNs for LTSF tasks: Segment-wise Iterations and Parallel Multi-step Forecasting (PMF). RNNs that combine these strategies, namely SegRNN, significantly reduce the required recurrent iterations for LTSF, resulting in notable improvements in forecast accuracy and inference speed. Extensive experiments demonstrate that SegRNN not only outperforms SOTA Transformer-based models but also reduces runtime and memory usage by more than 78%. These achievements provide strong evidence that RNNs continue to excel in LTSF tasks and encourage further exploration of this domain with more RNN-based approaches. The source code is coming soon.

Moments when a time series changes its behaviour are called change points. Detection of such points is a well-known problem, which can be found in many applications: quality monitoring of industrial processes, failure detection in complex systems, health monitoring, speech recognition and video analysis. Occurrence of change point implies that the state of the system is altered and its timely detection might help to prevent unwanted consequences. In this paper, we present two online change-point detection approaches based on neural networks. These algorithms demonstrate linear computational complexity and are suitable for change-point detection in large time series. We compare them with the best known algorithms on various synthetic and real world data sets. Experiments show that the proposed methods outperform known approaches.

Looped Transformers repeatedly apply the same set of Transformer layers, giving them a recurrent architecture for latent computation. Their strong performance on iterative reasoning and length-generalization tasks suggests an appealing explanation: recurrence may provide an inductive bias that lets the model reuse a learned algorithm across loops. However, weight sharing alone does not imply that every loop performs the same operation. This raises a basic question: is each loop actually repeating the same computation, and if not, what routes the shared parameters to different operations? We study this question using graph walks as a test case. In the model's native trajectories, decoded predictions can advance by different numbers of graph steps or remain at a reached target, showing that recurrent progress need not follow a fixed one-loop-one-step pattern. We then show that a frozen loop can be steered toward different transitions by modifying its entering hidden state: a learned linear layer J selects the desired transition without changing the shared Transformer layers. To test how this steering works, we use activation patching and find that attention patterns can recover its effects and switch the selected transition. Across five matched pairs of graph models, changing intermediate supervision during backbone training changes which transitions J can induce. This suggests that J selects computations learned by the backbone rather than creating new algorithms. Together, these results show that the hidden state can control shared computation, with attention routing as a causal pathway.

Evaluation efforts such as TREC, CLEF, NTCIR and FIRE, alongside public leaderboard such as MS MARCO, are intended to encourage research and track our progress, addressing big questions in our field. However, the goal is not simply to identify which run is "best", achieving the top score. The goal is to move the field forward by developing new robust techniques, that work in many different settings, and are adopted in research and practice. This paper uses the MS MARCO and TREC Deep Learning Track as our case study, comparing it to the case of TREC ad hoc ranking in the 1990s. We show how the design of the evaluation effort can encourage or discourage certain outcomes, and raising questions about internal and external validity of results. We provide some analysis of certain pitfalls, and a statement of best practices for avoiding such pitfalls. We summarize the progress of the effort so far, and describe our desired end state of "robust usefulness", along with steps that might be required to get us there.

Transformers have become the dominant architecture for sequence modeling by using self-attention to enable expressive and highly parallel processing. However, the resulting quadratic time and memory costs limit efficiency in long-context settings. Recurrent models such as LSTMs provide explicit nonlinear state updates and strong state-tracking capabilities, yet their strictly sequential computation limits parallelism. We introduce the Parallel Recursive LSTM (PR-LSTM), a hierarchical recurrent architecture that replaces left-to-right recurrence with recursive nonlinear state composition over a balanced computation tree. Tokens are first mapped independently to latent states, which are then recursively merged by a learned gated composition block. This structure uses the reduction pattern underlying parallel scans as a fixed execution schedule, rather than assuming an associative recurrence. As a result, PR-LSTM retains nonlinear gated state representations while reducing recurrent parallel depth from linear to logarithmic. Empirically, PR-LSTM achieves strong sequence-length generalization on formal-language benchmarks, solving more tasks than standard RNN, LSTM, and Transformer baselines, while avoiding the quadratic scaling of attention. These results suggest that recurrent computation can be reorganized hierarchically to expose parallelism without restricting the transition dynamics to linear or associative forms.

Long-horizon tasks requiring multi-step reasoning and dynamic re-planning remain challenging for large language models (LLMs). Sequential prompting methods are prone to context drift, loss of goal information, and recurrent failure cycles, while hierarchical prompting methods often weaken cross-level continuity or incur substantial runtime overhead. We introduce ReCAP (Recursive Context-Aware Reasoning and Planning), a hierarchical framework with shared context for reasoning and planning in LLMs. ReCAP combines three key mechanisms: (i) plan-ahead decomposition, in which the model generates a full subtask list, executes the first item, and refines the remainder; (ii) structured re-injection of parent plans, maintaining consistent multi-level context during recursive return; and (iii) memory-efficient execution, bounding the active prompt so costs scale linearly with task depth. Together these mechanisms align high-level goals with low-level actions, reduce redundant prompting, and preserve coherent context updates across recursion. Experiments demonstrate that ReCAP substantially improves subgoal alignment and success rates on various long-horizon reasoning benchmarks, achieving a 32% gain on synchronous Robotouille and a 29% improvement on asynchronous Robotouille under the strict pass@1 protocol.

Time series are the primary data type used to record dynamic system measurements and generated in great volume by both physical sensors and online processes (virtual sensors). Time series analytics is therefore crucial to unlocking the wealth of information implicit in available data. With the recent advancements in graph neural networks (GNNs), there has been a surge in GNN-based approaches for time series analysis. These approaches can explicitly model inter-temporal and inter-variable relationships, which traditional and other deep neural network-based methods struggle to do. In this survey, we provide a comprehensive review of graph neural networks for time series analysis (GNN4TS), encompassing four fundamental dimensions: forecasting, classification, anomaly detection, and imputation. Our aim is to guide designers and practitioners to understand, build applications, and advance research of GNN4TS. At first, we provide a comprehensive task-oriented taxonomy of GNN4TS. Then, we present and discuss representative research works and introduce mainstream applications of GNN4TS. A comprehensive discussion of potential future research directions completes the survey. This survey, for the first time, brings together a vast array of knowledge on GNN-based time series research, highlighting foundations, practical applications, and opportunities of graph neural networks for time series analysis.

Recurrent neural network is a powerful model that learns temporal patterns in sequential data. For a long time, it was believed that recurrent networks are difficult to train using simple optimizers, such as stochastic gradient descent, due to the so-called vanishing gradient problem. In this paper, we show that learning longer term patterns in real data, such as in natural language, is perfectly possible using gradient descent. This is achieved by using a slight structural modification of the simple recurrent neural network architecture. We encourage some of the hidden units to change their state slowly by making part of the recurrent weight matrix close to identity, thus forming kind of a longer term memory. We evaluate our model in language modeling experiments, where we obtain similar performance to the much more complex Long Short Term Memory (LSTM) networks (Hochreiter & Schmidhuber, 1997).

Web navigation is a unique domain that can automate many repetitive real-life tasks and is challenging as it requires long-horizon sequential decision making beyond typical multimodal large language model (MLLM) tasks. Yet, specialized reward models for web navigation that can be utilized during both training and test-time have been absent until now. Despite the importance of speed and cost-effectiveness, prior works have utilized MLLMs as reward models, which poses significant constraints for real-world deployment. To address this, in this work, we propose the first process reward model (PRM) called Web-Shepherd which could assess web navigation trajectories in a step-level. To achieve this, we first construct the WebPRM Collection, a large-scale dataset with 40K step-level preference pairs and annotated checklists spanning diverse domains and difficulty levels. Next, we also introduce the WebRewardBench, the first meta-evaluation benchmark for evaluating PRMs. In our experiments, we observe that our Web-Shepherd achieves about 30 points better accuracy compared to using GPT-4o on WebRewardBench. Furthermore, when testing on WebArena-lite by using GPT-4o-mini as the policy and Web-Shepherd as the verifier, we achieve 10.9 points better performance, in 10 less cost compared to using GPT-4o-mini as the verifier. Our model, dataset, and code are publicly available at LINK.

Discrete event sequences are ubiquitous, such as an ordered event series of process interactions in Information and Communication Technology systems. Recent years have witnessed increasing efforts in detecting anomalies with discrete-event sequences. However, it still remains an extremely difficult task due to several intrinsic challenges including data imbalance issues, the discrete property of the events, and sequential nature of the data. To address these challenges, in this paper, we propose OC4Seq, a multi-scale one-class recurrent neural network for detecting anomalies in discrete event sequences. Specifically, OC4Seq integrates the anomaly detection objective with recurrent neural networks (RNNs) to embed the discrete event sequences into latent spaces, where anomalies can be easily detected. In addition, given that an anomalous sequence could be caused by either individual events, subsequences of events, or the whole sequence, we design a multi-scale RNN framework to capture different levels of sequential patterns simultaneously. Experimental results on three benchmark datasets show that OC4Seq consistently outperforms various representative baselines by a large margin. Moreover, through both quantitative and qualitative analysis, the importance of capturing multi-scale sequential patterns for event anomaly detection is verified.

Predictive process monitoring is a process mining task aimed at forecasting information about a running process trace, such as the most correct next activity to be executed. In medical domains, predictive process monitoring can provide valuable decision support in atypical and nontrivial situations. Decision support and quality assessment in medicine cannot ignore domain knowledge, in order to be grounded on all the available information (which is not limited to data) and to be really acceptable by end users. In this paper, we propose a predictive process monitoring approach relying on the use of a {\em transformer}, a deep learning architecture based on the attention mechanism. A major contribution of our work lies in the incorporation of ontological domain-specific knowledge, carried out through a graph positional encoding technique. The paper presents and discusses the encouraging experimental result we are collecting in the domain of stroke management.

Most existing vision-language-action (VLA) models for robotic manipulation lack progress awareness, typically relying on hand-crafted heuristics for task termination. This limitation is particularly severe in long-horizon tasks involving cascaded sub-goals. In this work, we investigate the estimation and integration of task progress, proposing a novel model named {\textbf \vla}. Our technical contributions are twofold: (1) robust progress estimation: We pre-train a progress estimator on large-scale, unsupervised video-text robotic datasets. This estimator achieves a low prediction residual (0.07 on a scale of [0, 1]) in simulation and demonstrates zero-shot generalization to unseen real-world samples, and (2) differentiable progress guidance: We introduce an inverse dynamics world model that maps predicted action tokens into future latent visual states. These latents are then processed by the progress estimator; by applying a maximal progress regularization, we establish a differentiable pipeline that provides progress-piloted guidance to refine action tokens. Extensive experiments on the CALVIN and LIBERO benchmarks, alongside real-world robot deployment, consistently demonstrate substantial improvements in success rates and generalization over strong baselines.

Forecasts of explosive AI progress hinge on AI agents automating AI research. But evidence on whether agents can carry out open-ended AI research is thin. Current evaluations either test agents on narrow, verifiable tasks, which excludes open-ended research, or submit AI-generated papers to blind peer review, which is overstretched, stochastic, and suffers from poor review quality. We introduce a third way to measure progress towards AI R\&D automation. An agent takes on the central, open-ended research question of a high-quality unpublished paper, and the paper's original authors grade its output. We call these shadow evaluations. We ran shadow evaluations on two unpublished NeurIPS 2026 submissions, giving frontier agents six days and thousands of dollars of compute. The agents completed all of the engineering without human help, yet could not make substantial progress towards answering the research questions. As a result, both papers were unambiguously rejected by the authors. We identify five recurring failure modes: poor judgment about the bar for publishable research, uncreative responses to shortcomings in the research design, ineffective backtracking from dead ends, poor resource awareness, and instruction drift. A robustness check with a second model and scaffold reproduced these failures. We release the expert reviews, survey responses, agent repositories, and logs. Our results provide early evidence that today's agents can do the engineering of AI research, but struggle with critical parts of the research lifecycle.

In this paper we compare different types of recurrent units in recurrent neural networks (RNNs). Especially, we focus on more sophisticated units that implement a gating mechanism, such as a long short-term memory (LSTM) unit and a recently proposed gated recurrent unit (GRU). We evaluate these recurrent units on the tasks of polyphonic music modeling and speech signal modeling. Our experiments revealed that these advanced recurrent units are indeed better than more traditional recurrent units such as tanh units. Also, we found GRU to be comparable to LSTM.

Long-horizon agents must complete workflows in which later activities depend on earlier outputs and changes to shared state. A key challenge for evaluation is to expand task requirements and their dependencies while keeping tasks executable and outcomes verifiable. We introduce SkillHorizon, a benchmark that constructs long-horizon tasks through skill composition in seven business environments. Its generators use domain-specific rules to turn reusable skill procedures into concrete business activities. These activities are connected through input-output dependencies, shared resources, and state updates, allowing workload and coordination demands to grow together. Successful reference executions validate task feasibility and measure interaction workload, while programmatic evaluators assess local completion and whole-task success. We evaluate five language models on 1,050 tasks with reference interaction workloads ranging from 64K to 1M tokens. Across these scales, mean local-goal completion falls from 90.4% to 46.8%, as completed work fails to keep pace with growing requirements. At larger workloads, agents more often submit unsuccessful final answers with substantial work unfinished and tool-call allowance remaining. Trace analysis also identifies cases where scripts execute successfully but their outputs fail downstream business checks. SkillHorizon provides a configurable testbed for studying sustained progress, dependency coordination, and complete task delivery in growing workflows. Our code is available at https://github.com/KnowComp/SkillHorizon.

Time series is a pervasive data type across various application domains, rendering the reasonable solving of diverse time series tasks a long-standing goal. Recent advances in large language models (LLMs), especially their reasoning abilities unlocked through reinforcement learning (RL), have opened new opportunities for tackling tasks with long Chain-of-Thought (CoT) reasoning. However, leveraging LLM reasoning for time series remains in its infancy, hindered by the absence of carefully curated time series CoT data for training, limited data efficiency caused by underexplored data scheduling, and the lack of RL algorithms tailored for exploiting such time series CoT data. In this paper, we introduce VeriTime, a framework that tailors LLMs for time series reasoning through data synthesis, data scheduling, and RL training. First, we propose a data synthesis pipeline that constructs a TS-text multimodal dataset with process-verifiable annotations. Second, we design a data scheduling mechanism that arranges training samples according to a principled hierarchy of difficulty and task taxonomy. Third, we develop a two-stage reinforcement finetuning featuring fine-grained, multi-objective rewards that leverage verifiable process-level CoT data. Extensive experiments show that VeriTime substantially boosts LLM performance across diverse time series reasoning tasks. Notably, it enables compact 3B, 4B models to achieve reasoning capabilities on par with or exceeding those of larger proprietary LLMs.

Recurrent neural networks (RNNs) have recently demonstrated strong performance and faster inference than Transformers at comparable parameter budgets. However, the recursive gradient computation with the backpropagation through time (or BPTT) algorithm remains the major computational bottleneck. In this work, we propose a novel method that replaces BPTT with a fixed gradient feedback mechanism, yielding an efficient approximation of the exact gradient propagation based on the assumption of time stationarity. Our approach leverages state-space model (SSM) principles to define a structured feedback matrix that directly propagates gradients from future time steps. This formulation bypasses the need for recursive gradient backpropagation, significantly reducing training overhead while preserving the network's ability to capture long-term dependencies. The experiments on language modeling benchmarks exhibit competitive perplexity scores, while significantly reducing the training costs. These promising results suggest that designing a feedback method like an SSM can fully exploit the efficiency advantages of RNNs for many practical applications.