new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

ID Balancing: Stable Training of Extremely Sparse MoE via PID-Based Load Control

Scaling Large Language Models (LLMs) via Mixture-of-Experts (MoE) enables massive parameter growth with nearly constant per-token computation. However, further scaling the parameter count requires increasingly sparse routing, where expert load imbalance becomes more severe. This imbalance reduces parameter utilization and training efficiency, and can undermine training stability, becoming a bottleneck to reliable scaling. In this work, we unify two representative auxiliary-loss-free methods as incomplete Proportional-Integral-Derivative (PID) controllers: DeepSeek's loss-free method acts as a fixed-step integral controller, while Kimi K3's Quantile Balancing functions as a generalized proportional controller. Building on this control perspective, we propose ID Balancing, an Integral-Derivative controller. It scales its integral term with load error and activates its derivative term only when imbalance worsens, enabling stronger corrections for large or worsening errors and smaller updates near balance. Evaluated across Top-10, Top-5, and Top-3 routing over 768 experts, ID Balancing reduces worst-case backbone MaxVio and training-average backbone MinVio by over 50% and 12%, respectively, relative to the best baselines in the Top-3 setting. When the total parameter count increases from 18.9B to 69.9B (Top-10-of-768), ID Balancing's worst-case backbone MaxVio remains nearly unchanged and is approximately 89.6% lower than that of the auxiliary-loss baseline. ID Balancing also maintains competitive language-modeling and downstream performance. The advantages of ID Balancing grow as sparsity increases, making it a promising solution for scaling larger, sparser MoE models.

  • 11 authors
·
Sep 30

From Cradle to Cane: A Two-Pass Framework for High-Fidelity Lifespan Face Aging

Face aging has become a crucial task in computer vision, with applications ranging from entertainment to healthcare. However, existing methods struggle with achieving a realistic and seamless transformation across the entire lifespan, especially when handling large age gaps or extreme head poses. The core challenge lies in balancing age accuracy and identity preservation--what we refer to as the Age-ID trade-off. Most prior methods either prioritize age transformation at the expense of identity consistency or vice versa. In this work, we address this issue by proposing a two-pass face aging framework, named Cradle2Cane, based on few-step text-to-image (T2I) diffusion models. The first pass focuses on solving age accuracy by introducing an adaptive noise injection (AdaNI) mechanism. This mechanism is guided by including prompt descriptions of age and gender for the given person as the textual condition. Also, by adjusting the noise level, we can control the strength of aging while allowing more flexibility in transforming the face. However, identity preservation is weakly ensured here to facilitate stronger age transformations. In the second pass, we enhance identity preservation while maintaining age-specific features by conditioning the model on two identity-aware embeddings (IDEmb): SVR-ArcFace and Rotate-CLIP. This pass allows for denoising the transformed image from the first pass, ensuring stronger identity preservation without compromising the aging accuracy. Both passes are jointly trained in an end-to-end way. Extensive experiments on the CelebA-HQ test dataset, evaluated through Face++ and Qwen-VL protocols, show that our Cradle2Cane outperforms existing face aging methods in age accuracy and identity consistency. Code is available at https://github.com/byliutao/Cradle2Cane.

  • 10 authors
·
Jun 25, 2025

Step-by-Step Unmasking for Parameter-Efficient Fine-tuning of Large Language Models

Fine-tuning large language models (LLMs) on downstream tasks requires substantial computational resources. Selective PEFT, a class of parameter-efficient fine-tuning (PEFT) methodologies, aims to mitigate these computational challenges by selectively fine-tuning only a small fraction of the model parameters. Although parameter-efficient, these techniques often fail to match the performance of fully fine-tuned models, primarily due to inherent biases introduced during parameter selection. Traditional selective PEFT techniques use a fixed set of parameters selected using different importance heuristics, failing to capture parameter importance dynamically and often leading to suboptimal performance. We introduce ID^3, a novel selective PEFT method that calculates parameter importance continually, and dynamically unmasks parameters by balancing exploration and exploitation in parameter selection. Our empirical study on 16 tasks spanning natural language understanding, mathematical reasoning and summarization demonstrates the effectiveness of our method compared to fixed-masking selective PEFT techniques. We analytically show that ID^3 reduces the number of gradient updates by a factor of two, enhancing computational efficiency. Since ID^3 is robust to random initialization of neurons and operates directly on the optimization process, it is highly flexible and can be integrated with existing additive and reparametrization-based PEFT techniques such as adapters and LoRA respectively.

  • 4 authors
·
Aug 26, 2024

Gender and Positional Biases in LLM-Based Hiring Decisions: Evidence from Comparative CV/Résumé Evaluations

This study examines the behavior of Large Language Models (LLMs) when evaluating professional candidates based on their resumes or curricula vitae (CVs). In an experiment involving 22 leading LLMs, each model was systematically given one job description along with a pair of profession-matched CVs, one bearing a male first name, the other a female first name, and asked to select the more suitable candidate for the job. Each CV pair was presented twice, with names swapped to ensure that any observed preferences in candidate selection stemmed from gendered names cues. Despite identical professional qualifications across genders, all LLMs consistently favored female-named candidates across 70 different professions. Adding an explicit gender field (male/female) to the CVs further increased the preference for female applicants. When gendered names were replaced with gender-neutral identifiers "Candidate A" and "Candidate B", several models displayed a preference to select "Candidate A". Counterbalancing gender assignment between these gender-neutral identifiers resulted in gender parity in candidate selection. When asked to rate CVs in isolation rather than compare pairs, LLMs assigned slightly higher average scores to female CVs overall, but the effect size was negligible. Including preferred pronouns (he/him or she/her) next to a candidate's name slightly increased the odds of the candidate being selected regardless of gender. Finally, most models exhibited a substantial positional bias to select the candidate listed first in the prompt. These findings underscore the need for caution when deploying LLMs in high-stakes autonomous decision-making contexts and raise doubts about whether LLMs consistently apply principled reasoning.

  • 1 authors
·
May 26, 2025

Large Language Model's Multi-Capability Alignment in Biomedical Domain

BalancedBio is a theoretically grounded framework for parameter-efficient biomedical reasoning, addressing multi-capability integration in domain-specific AI alignment. It establishes the Biomedical Multi-Capability Convergence Theorem, proving orthogonal gradient spaces are essential to prevent capability interference for safe deployment. Key innovations include: (1) Medical Knowledge Grounded Synthetic Generation (MKGSG), extending Source2Synth with clinical workflow constraints and medical ontology validation for factual accuracy and safety; and (2) Capability Aware Group Relative Policy Optimization, deriving optimal hybrid reward weighting to maintain orthogonality in RL, using a reward model with rule-based and model-based scores adapted to biomedical tasks. Mathematical analysis proves Pareto-optimal convergence, preserving performance across capabilities. It achieves state-of-the-art results in its parameter class: domain expertise (80.95% BIOMED-MMLU, +15.32% over baseline), reasoning (61.94%, +7.75%), instruction following (67.95%, +6.44%), and integration (86.7%, +18.5%). Theoretical safety guarantees include bounds on capability preservation and clinical accuracy. Real-world deployment yields 78% cost reduction, 23% improved diagnostic accuracy, and 89% clinician acceptance. This work provides a principled methodology for biomedical AI alignment, enabling efficient reasoning with essential safety and reliability, with the 0.5B model version to be released.

  • 4 authors
·
Aug 5, 2025

ConsistentID: Portrait Generation with Multimodal Fine-Grained Identity Preserving

Diffusion-based technologies have made significant strides, particularly in personalized and customized facialgeneration. However, existing methods face challenges in achieving high-fidelity and detailed identity (ID)consistency, primarily due to insufficient fine-grained control over facial areas and the lack of a comprehensive strategy for ID preservation by fully considering intricate facial details and the overall face. To address these limitations, we introduce ConsistentID, an innovative method crafted for diverseidentity-preserving portrait generation under fine-grained multimodal facial prompts, utilizing only a single reference image. ConsistentID comprises two key components: a multimodal facial prompt generator that combines facial features, corresponding facial descriptions and the overall facial context to enhance precision in facial details, and an ID-preservation network optimized through the facial attention localization strategy, aimed at preserving ID consistency in facial regions. Together, these components significantly enhance the accuracy of ID preservation by introducing fine-grained multimodal ID information from facial regions. To facilitate training of ConsistentID, we present a fine-grained portrait dataset, FGID, with over 500,000 facial images, offering greater diversity and comprehensiveness than existing public facial datasets. % such as LAION-Face, CelebA, FFHQ, and SFHQ. Experimental results substantiate that our ConsistentID achieves exceptional precision and diversity in personalized facial generation, surpassing existing methods in the MyStyle dataset. Furthermore, while ConsistentID introduces more multimodal ID information, it maintains a fast inference speed during generation.

  • 13 authors
·
Dec 27, 2024 1

Person Re-identification by Contour Sketch under Moderate Clothing Change

Person re-identification (re-id), the process of matching pedestrian images across different camera views, is an important task in visual surveillance. Substantial development of re-id has recently been observed, and the majority of existing models are largely dependent on color appearance and assume that pedestrians do not change their clothes across camera views. This limitation, however, can be an issue for re-id when tracking a person at different places and at different time if that person (e.g., a criminal suspect) changes his/her clothes, causing most existing methods to fail, since they are heavily relying on color appearance and thus they are inclined to match a person to another person wearing similar clothes. In this work, we call the person re-id under clothing change the "cross-clothes person re-id". In particular, we consider the case when a person only changes his clothes moderately as a first attempt at solving this problem based on visible light images; that is we assume that a person wears clothes of a similar thickness, and thus the shape of a person would not change significantly when the weather does not change substantially within a short period of time. We perform cross-clothes person re-id based on a contour sketch of person image to take advantage of the shape of the human body instead of color information for extracting features that are robust to moderate clothing change. Due to the lack of a large-scale dataset for cross-clothes person re-id, we contribute a new dataset that consists of 33698 images from 221 identities. Our experiments illustrate the challenges of cross-clothes person re-id and demonstrate the effectiveness of our proposed method.

  • 3 authors
·
Feb 6, 2020

ID-Aligner: Enhancing Identity-Preserving Text-to-Image Generation with Reward Feedback Learning

The rapid development of diffusion models has triggered diverse applications. Identity-preserving text-to-image generation (ID-T2I) particularly has received significant attention due to its wide range of application scenarios like AI portrait and advertising. While existing ID-T2I methods have demonstrated impressive results, several key challenges remain: (1) It is hard to maintain the identity characteristics of reference portraits accurately, (2) The generated images lack aesthetic appeal especially while enforcing identity retention, and (3) There is a limitation that cannot be compatible with LoRA-based and Adapter-based methods simultaneously. To address these issues, we present ID-Aligner, a general feedback learning framework to enhance ID-T2I performance. To resolve identity features lost, we introduce identity consistency reward fine-tuning to utilize the feedback from face detection and recognition models to improve generated identity preservation. Furthermore, we propose identity aesthetic reward fine-tuning leveraging rewards from human-annotated preference data and automatically constructed feedback on character structure generation to provide aesthetic tuning signals. Thanks to its universal feedback fine-tuning framework, our method can be readily applied to both LoRA and Adapter models, achieving consistent performance gains. Extensive experiments on SD1.5 and SDXL diffusion models validate the effectiveness of our approach. Project Page: \url{https://idaligner.github.io/}

  • 6 authors
·
Apr 23, 2024 1

DocXPand-25k: a large and diverse benchmark dataset for identity documents analysis

Identity document (ID) image analysis has become essential for many online services, like bank account opening or insurance subscription. In recent years, much research has been conducted on subjects like document localization, text recognition and fraud detection, to achieve a level of accuracy reliable enough to automatize identity verification. However, there are only a few available datasets to benchmark ID analysis methods, mainly because of privacy restrictions, security requirements and legal reasons. In this paper, we present the DocXPand-25k dataset, which consists of 24,994 richly labeled IDs images, generated using custom-made vectorial templates representing nine fictitious ID designs, including four identity cards, two residence permits and three passports designs. These synthetic IDs feature artificially generated personal information (names, dates, identifiers, faces, barcodes, ...), and present a rich diversity in the visual layouts and textual contents. We collected about 5.8k diverse backgrounds coming from real-world photos, scans and screenshots of IDs to guarantee the variety of the backgrounds. The software we wrote to generate these images has been published (https://github.com/QuickSign/docxpand/) under the terms of the MIT license, and our dataset has been published (https://github.com/QuickSign/docxpand/releases/tag/v1.0.0) under the terms of the CC-BY-NC-SA 4.0 License.

  • 5 authors
·
Jul 30, 2024

Source Known Identifiers: A Three-Tier Identity System for Distributed Applications

Distributed applications need identifiers that satisfy storage efficiency, chronological sortability, origin metadata embedding, zero-lookup verifiability, confidentiality for external consumers, and multi-century addressability. Based on our literature survey, no existing scheme provides all six of these identifier properties within a unified system. This paper introduces Source Known Identifiers (SKIDs), a three-tier identity system that projects a single entity identity across trust boundaries, addressing all six properties. The first tier, Source Known ID (SKID), is a 64-bit signed integer embedding a timestamp with a 250-millisecond precision, application topology, and a per-entity-type sequence counter. It serves as the database primary key, providing compact storage (8 bytes) and natural B-tree ordering for optimized database indexing. The second tier, Source Known Entity ID (SKEID), extends the SKID into a 128-bit Universally Unique Identifier (UUID) compatible value by adding an entity type discriminator, an epoch selector, and a BLAKE3 keyed message authentication code (MAC). SKEIDs enable zero-lookup verification of identifier origin, integrity, and entity type within trusted environments, with a big-endian byte layout that preserves chronological ordering in lexicographic UUID string comparisons. The third tier, Secure SKEID, encrypts the entire SKEID using AES-256 symmetric encryption as a single-block pseudorandom permutation, producing ciphertext indistinguishable from random bytes while remaining compatible with standard UUID data-type parsers in string representation. Deterministic bidirectional transformations connect all three tiers.

  • 1 authors
·
Mar 30

Multi-agent Reinforcement Learning-based Network Intrusion Detection System

Intrusion Detection Systems (IDS) play a crucial role in ensuring the security of computer networks. Machine learning has emerged as a popular approach for intrusion detection due to its ability to analyze and detect patterns in large volumes of data. However, current ML-based IDS solutions often struggle to keep pace with the ever-changing nature of attack patterns and the emergence of new attack types. Additionally, these solutions face challenges related to class imbalance, where the number of instances belonging to different classes (normal and intrusions) is significantly imbalanced, which hinders their ability to effectively detect minor classes. In this paper, we propose a novel multi-agent reinforcement learning (RL) architecture, enabling automatic, efficient, and robust network intrusion detection. To enhance the capabilities of the proposed model, we have improved the DQN algorithm by implementing the weighted mean square loss function and employing cost-sensitive learning techniques. Our solution introduces a resilient architecture designed to accommodate the addition of new attacks and effectively adapt to changes in existing attack patterns. Experimental results realized using CIC-IDS-2017 dataset, demonstrate that our approach can effectively handle the class imbalance problem and provide a fine grained classification of attacks with a very low false positive rate. In comparison to the current state-of-the-art works, our solution demonstrates a significant superiority in both detection rate and false positive rate.

  • 4 authors
·
Jul 8, 2024

RestorerID: Towards Tuning-Free Face Restoration with ID Preservation

Blind face restoration has made great progress in producing high-quality and lifelike images. Yet it remains challenging to preserve the ID information especially when the degradation is heavy. Current reference-guided face restoration approaches either require face alignment or personalized test-tuning, which are unfaithful or time-consuming. In this paper, we propose a tuning-free method named RestorerID that incorporates ID preservation during face restoration. RestorerID is a diffusion model-based method that restores low-quality images with varying levels of degradation by using a single reference image. To achieve this, we propose a unified framework to combine the ID injection with the base blind face restoration model. In addition, we design a novel Face ID Rebalancing Adapter (FIR-Adapter) to tackle the problems of content unconsistency and contours misalignment that are caused by information conflicts between the low-quality input and reference image. Furthermore, by employing an Adaptive ID-Scale Adjusting strategy, RestorerID can produce superior restored images across various levels of degradation. Experimental results on the Celeb-Ref dataset and real-world scenarios demonstrate that RestorerID effectively delivers high-quality face restoration with ID preservation, achieving a superior performance compared to the test-tuning approaches and other reference-guided ones. The code of RestorerID is available at https://github.com/YingJiacheng/RestorerID.

  • 10 authors
·
Nov 21, 2024

Identity-Duplication Auditing in National-Scale Neuroimaging Repositories

National-scale magnetic resonance imaging (MRI) repositories increasingly integrate data from different studies and institutions. However, subject identifiers that are valid only within individual datasets are no longer guaranteed to remain globally unique after aggregation, making it possible for the same subject to be assigned multiple identifiers, which we define as identity duplication. Such duplication can create leakage between training and test data and inflate apparent performance in downstream biomedical studies. Existing methods do not provide an end-to-end, image-based workflow for auditing this problem at repository scale. In this work, we present HAPPEN, a human-in-the-loop pipeline for auditing identity duplication in T1-weighted brain MRI repositories. It combines SHA-256 fingerprinting for exact-duplicate detection with supervised contrastive retrieval of non-identical scans that may originate from the same person. Retrieved pairs are reviewed as candidates in a locally hosted interface rather than automatically classified as duplicates. We deployed the workflow in a 95,129-scan aggregated repository and assessed end-to-end recovery using 54 genetic-reference pairs. Transferability was assessed by locally deploying the same workflow on 22,386 scans at an independent institution without model retraining or image transfer. Deployment in the study repository identified 1,316 exact-duplicate scan groups and 1,275 reviewer-supported near-duplicate subject groups. Of these groups, 56% and 82%, respectively, crossed dataset boundaries. All 54 genetic-reference pairs were recovered. The external team independently completed the full workflow using a locally selected operating threshold and review standard.

WithAnyone: Towards Controllable and ID Consistent Image Generation

Identity-consistent generation has become an important focus in text-to-image research, with recent models achieving notable success in producing images aligned with a reference identity. Yet, the scarcity of large-scale paired datasets containing multiple images of the same individual forces most approaches to adopt reconstruction-based training. This reliance often leads to a failure mode we term copy-paste, where the model directly replicates the reference face rather than preserving identity across natural variations in pose, expression, or lighting. Such over-similarity undermines controllability and limits the expressive power of generation. To address these limitations, we (1) construct a large-scale paired dataset MultiID-2M, tailored for multi-person scenarios, providing diverse references for each identity; (2) introduce a benchmark that quantifies both copy-paste artifacts and the trade-off between identity fidelity and variation; and (3) propose a novel training paradigm with a contrastive identity loss that leverages paired data to balance fidelity with diversity. These contributions culminate in WithAnyone, a diffusion-based model that effectively mitigates copy-paste while preserving high identity similarity. Extensive qualitative and quantitative experiments demonstrate that WithAnyone significantly reduces copy-paste artifacts, improves controllability over pose and expression, and maintains strong perceptual quality. User studies further validate that our method achieves high identity fidelity while enabling expressive controllable generation.

stepfun-ai StepFun
·
Oct 16, 2025 3

DAS: Dual-Aligned Semantic IDs Empowered Industrial Recommender System

Semantic IDs are discrete identifiers generated by quantizing the Multi-modal Large Language Models (MLLMs) embeddings, enabling efficient multi-modal content integration in recommendation systems. However, their lack of collaborative signals results in a misalignment with downstream discriminative and generative recommendation objectives. Recent studies have introduced various alignment mechanisms to address this problem, but their two-stage framework design still leads to two main limitations: (1) inevitable information loss during alignment, and (2) inflexibility in applying adaptive alignment strategies, consequently constraining the mutual information maximization during the alignment process. To address these limitations, we propose a novel and flexible one-stage Dual-Aligned Semantic IDs (DAS) method that simultaneously optimizes quantization and alignment, preserving semantic integrity and alignment quality while avoiding the information loss typically associated with two-stage methods. Meanwhile, DAS achieves more efficient alignment between the semantic IDs and collaborative signals, with the following two innovative and effective approaches: (1) Multi-view Constrative Alignment: To maximize mutual information between semantic IDs and collaborative signals, we first incorporate an ID-based CF debias module, and then design three effective contrastive alignment methods: dual user-to-item (u2i), dual item-to-item/user-to-user (i2i/u2u), and dual co-occurrence item-to-item/user-to-user (i2i/u2u). (2) Dual Learning: By aligning the dual quantizations of users and ads, the constructed semantic IDs for users and ads achieve stronger alignment. Finally, we conduct extensive offline experiments and online A/B tests to evaluate DAS's effectiveness, which is now successfully deployed across various advertising scenarios at Kuaishou App, serving over 400 million users daily.

  • 6 authors
·
Aug 14, 2025

AnyID: Ultra-Fidelity Universal Identity-Preserving Video Generation from Any Visual References

Identity-preserving video generation offers powerful tools for creative expression, allowing users to customize videos featuring their beloved characters. However, prevailing methods are typically designed and optimized for a single identity reference. This underlying assumption restricts creative flexibility by inadequately accommodating diverse real-world input formats. Relying on a single source also constitutes an ill-posed scenario, causing an inherently ambiguous setting that makes it difficult for the model to faithfully reproduce an identity across novel contexts. To address these issues, we present AnyID, an ultra-fidelity identity-preservation video generation framework that features two core contributions. First, we introduce a scalable omni-referenced architecture that effectively unifies heterogeneous identity inputs (e.g., faces, portraits, and videos) into a cohesive representation. Second, we propose a primary-referenced generation paradigm, which designates one reference as a canonical anchor and uses a novel differential prompt to enable precise, attribute-level controllability. We conduct training on a large-scale, meticulously curated dataset to ensure robustness and high fidelity, and then perform a final fine-tuning stage using reinforcement learning. This process leverages a preference dataset constructed from human evaluations, where annotators performed pairwise comparisons of videos based on two key criteria: identity fidelity and prompt controllability. Extensive evaluations validate that AnyID achieves ultra-high identity fidelity as well as superior attribute-level controllability across different task settings.

  • 8 authors
·
Mar 25

Infinite-ID: Identity-preserved Personalization via ID-semantics Decoupling Paradigm

Drawing on recent advancements in diffusion models for text-to-image generation, identity-preserved personalization has made significant progress in accurately capturing specific identities with just a single reference image. However, existing methods primarily integrate reference images within the text embedding space, leading to a complex entanglement of image and text information, which poses challenges for preserving both identity fidelity and semantic consistency. To tackle this challenge, we propose Infinite-ID, an ID-semantics decoupling paradigm for identity-preserved personalization. Specifically, we introduce identity-enhanced training, incorporating an additional image cross-attention module to capture sufficient ID information while deactivating the original text cross-attention module of the diffusion model. This ensures that the image stream faithfully represents the identity provided by the reference image while mitigating interference from textual input. Additionally, we introduce a feature interaction mechanism that combines a mixed attention module with an AdaIN-mean operation to seamlessly merge the two streams. This mechanism not only enhances the fidelity of identity and semantic consistency but also enables convenient control over the styles of the generated images. Extensive experimental results on both raw photo generation and style image generation demonstrate the superior performance of our proposed method.

  • 5 authors
·
Mar 18, 2024 5

Large-scale Training Data Search for Object Re-identification

We consider a scenario where we have access to the target domain, but cannot afford on-the-fly training data annotation, and instead would like to construct an alternative training set from a large-scale data pool such that a competitive model can be obtained. We propose a search and pruning (SnP) solution to this training data search problem, tailored to object re-identification (re-ID), an application aiming to match the same object captured by different cameras. Specifically, the search stage identifies and merges clusters of source identities which exhibit similar distributions with the target domain. The second stage, subject to a budget, then selects identities and their images from the Stage I output, to control the size of the resulting training set for efficient training. The two steps provide us with training sets 80\% smaller than the source pool while achieving a similar or even higher re-ID accuracy. These training sets are also shown to be superior to a few existing search methods such as random sampling and greedy sampling under the same budget on training data size. If we release the budget, training sets resulting from the first stage alone allow even higher re-ID accuracy. We provide interesting discussions on the specificity of our method to the re-ID problem and particularly its role in bridging the re-ID domain gap. The code is available at https://github.com/yorkeyao/SnP.

  • 4 authors
·
Mar 28, 2023

Agent Mesh: Reliability Primitives for Non-Idempotent Agent Delegation - Identity Adequacy and Evidence Adequacy

Autonomous agents increasingly perform bounded software tasks under an orchestrator that retries, resumes, and budgets them. The machinery such orchestrators reach for is the service mesh's: retry, timeout, and error-rate circuit breaking. We report a failure study of a production agentic software-delivery platform over 147 numbered incidents spanning 81 runs, each with a measured cost and, in most cases, a mutation proof reproducing the failure. All three assumptions those primitives rest on are violated in practice, and we quantify the consequences: a loop of fifty-four consecutive successful tool calls no error-rate breaker could see; a progress signal constant by construction, guaranteeing a false trip on the third repair round and driving one run from six of six components to three; twenty-one events accumulated across six invocations of one delegation, making a correct, idempotent component unwinnable; a misrouted failure that woke five components for a two-component fault, leaving three bystanders regressing working code; and twelve incidents in which the enforcement layer blocked correct work, the most expensive costing 107 agent turns and zero accepted writes. We find one cross-cutting cause and its dual. Identity adequacy: in five separate subsystems an identity that failed to discriminate produced a confident wrong answer, and two of them derived the corrective rule independently. Evidence adequacy: a reliability decision may be taken only on evidence capable of moving, attributable to what it measures, and deterministic under identical conditions. From the findings we derive seven reliability primitives whose enforcement unit is the delegation rather than the message, and specify the controlled evaluation the study motivates but does not constitute.

  • 3 authors
·
Aug 25

Rethinking the Bias of Foundation Model under Long-tailed Distribution

Long-tailed learning has garnered increasing attention due to its practical significance. Among the various approaches, the fine-tuning paradigm has gained considerable interest with the advent of foundation models. However, most existing methods primarily focus on leveraging knowledge from these models, overlooking the inherent biases introduced by the imbalanced training data they rely on. In this paper, we examine how such imbalances from pre-training affect long-tailed downstream tasks. Specifically, we find the imbalance biases inherited in foundation models on downstream task as parameter imbalance and data imbalance. During fine-tuning, we observe that parameter imbalance plays a more critical role, while data imbalance can be mitigated using existing re-balancing strategies. Moreover, we find that parameter imbalance cannot be effectively addressed by current re-balancing techniques, such as adjusting the logits, during training, unlike data imbalance. To tackle both imbalances simultaneously, we build our method on causal learning and view the incomplete semantic factor as the confounder, which brings spurious correlations between input samples and labels. To resolve the negative effects of this, we propose a novel backdoor adjustment method that learns the true causal effect between input samples and labels, rather than merely fitting the correlations in the data. Notably, we achieve an average performance increase of about 1.67% on each dataset.

  • 5 authors
·
Jan 27, 2025

ID-Booth: Identity-consistent Face Generation with Diffusion Models

Recent advances in generative modeling have enabled the generation of high-quality synthetic data that is applicable in a variety of domains, including face recognition. Here, state-of-the-art generative models typically rely on conditioning and fine-tuning of powerful pretrained diffusion models to facilitate the synthesis of realistic images of a desired identity. Yet, these models often do not consider the identity of subjects during training, leading to poor consistency between generated and intended identities. In contrast, methods that employ identity-based training objectives tend to overfit on various aspects of the identity, and in turn, lower the diversity of images that can be generated. To address these issues, we present in this paper a novel generative diffusion-based framework, called ID-Booth. ID-Booth consists of a denoising network responsible for data generation, a variational auto-encoder for mapping images to and from a lower-dimensional latent space and a text encoder that allows for prompt-based control over the generation procedure. The framework utilizes a novel triplet identity training objective and enables identity-consistent image generation while retaining the synthesis capabilities of pretrained diffusion models. Experiments with a state-of-the-art latent diffusion model and diverse prompts reveal that our method facilitates better intra-identity consistency and inter-identity separability than competing methods, while achieving higher image diversity. In turn, the produced data allows for effective augmentation of small-scale datasets and training of better-performing recognition models in a privacy-preserving manner. The source code for the ID-Booth framework is publicly available at https://github.com/dariant/ID-Booth.

  • 6 authors
·
Apr 9, 2025

Uniformly Stable Minimal Weyl--Heisenberg Measurements Approaching the SIC Benchmark

Informational completeness (IC) guarantees that an inverse exists, not that it is statistically well conditioned. For minimal rank-one Weyl--Heisenberg (WH) measurements, covariance makes the nonidentity projector-Gram spectrum proportional to the fiducial's ambiguity intensities, with eigenvalues \(d|χ_ϕ(u)|^2\), turning stability into an explicit worst-direction design problem; write \(λ\) for its smallest nonidentity eigenvalue. Haar fiducials are IC almost surely while \(\mathbb E[λ^{-1}]=\infty\), and an explicit geometric family used to establish balanced informationally complete measurements in every dimension has a normalized spectral floor bounded above by an exponentially decaying envelope. We then construct a hierarchy of minimal measurements. A cyclic family with exactly \(d^2\) outcomes in every integer dimension has floors \(Θ(d^{-3})\) for odd \(d\) and \(Θ(d^{-5})\) for even \(d\); a finite-field family for \(q=2^m\) obeys the uniform bound \(λ\ge4/9\). Our main result treats every prime-power dimension of characteristic \(p\ge5\). A balanced one-coordinate perturbation repairs the zero ambiguity axis of a cubic Alltop state, gives an attained floor uniformly bounded below by a positive constant, and confines the entire nonidentity spectrum to \([L_q,U_q]\) with \(U_q/L_q\to1\). Its SIC-normalized minimum tends to one, and \(λ(ϕ_q)/Λ_q^\star\to1\) for the global finite-field WH max--min optimum \(Λ_q^\star\), without assuming SIC existence. The complete spectrum determines the exact finite-sample Hilbert--Schmidt error of canonical linear inversion at \(I/d\), while its lower edge controls local Fisher efficiency and canonical-shadow bounds.

  • 2 authors
·
Aug 11

StableIdentity: Inserting Anybody into Anywhere at First Sight

Recent advances in large pretrained text-to-image models have shown unprecedented capabilities for high-quality human-centric generation, however, customizing face identity is still an intractable problem. Existing methods cannot ensure stable identity preservation and flexible editability, even with several images for each subject during training. In this work, we propose StableIdentity, which allows identity-consistent recontextualization with just one face image. More specifically, we employ a face encoder with an identity prior to encode the input face, and then land the face representation into a space with an editable prior, which is constructed from celeb names. By incorporating identity prior and editability prior, the learned identity can be injected anywhere with various contexts. In addition, we design a masked two-phase diffusion loss to boost the pixel-level perception of the input face and maintain the diversity of generation. Extensive experiments demonstrate our method outperforms previous customization methods. In addition, the learned identity can be flexibly combined with the off-the-shelf modules such as ControlNet. Notably, to the best knowledge, we are the first to directly inject the identity learned from a single image into video/3D generation without finetuning. We believe that the proposed StableIdentity is an important step to unify image, video, and 3D customized generation models.

  • 7 authors
·
Jan 29, 2024 2

I'm Spartacus, No, I'm Spartacus: Measuring and Understanding LLM Identity Confusion

Large Language Models (LLMs) excel in diverse tasks such as text generation, data analysis, and software development, making them indispensable across domains like education, business, and creative industries. However, the rapid proliferation of LLMs (with over 560 companies developing or deploying them as of 2024) has raised concerns about their originality and trustworthiness. A notable issue, termed identity confusion, has emerged, where LLMs misrepresent their origins or identities. This study systematically examines identity confusion through three research questions: (1) How prevalent is identity confusion among LLMs? (2) Does it arise from model reuse, plagiarism, or hallucination? (3) What are the security and trust-related impacts of identity confusion? To address these, we developed an automated tool combining documentation analysis, self-identity recognition testing, and output similarity comparisons--established methods for LLM fingerprinting--and conducted a structured survey via Credamo to assess its impact on user trust. Our analysis of 27 LLMs revealed that 25.93% exhibit identity confusion. Output similarity analysis confirmed that these issues stem from hallucinations rather than replication or reuse. Survey results further highlighted that identity confusion significantly erodes trust, particularly in critical tasks like education and professional use, with declines exceeding those caused by logical errors or inconsistencies. Users attributed these failures to design flaws, incorrect training data, and perceived plagiarism, underscoring the systemic risks posed by identity confusion to LLM reliability and trustworthiness.

  • 8 authors
·
Nov 15, 2024

Brain-ID: Learning Contrast-agnostic Anatomical Representations for Brain Imaging

Recent learning-based approaches have made astonishing advances in calibrated medical imaging like computerized tomography (CT), yet they struggle to generalize in uncalibrated modalities -- notably magnetic resonance (MR) imaging, where performance is highly sensitive to the differences in MR contrast, resolution, and orientation. This prevents broad applicability to diverse real-world clinical protocols. We introduce Brain-ID, an anatomical representation learning model for brain imaging. With the proposed "mild-to-severe" intra-subject generation, Brain-ID is robust to the subject-specific brain anatomy regardless of the appearance of acquired images (e.g., contrast, deformation, resolution, artifacts). Trained entirely on synthetic data, Brain-ID readily adapts to various downstream tasks through only one layer. We present new metrics to validate the intra- and inter-subject robustness of Brain-ID features, and evaluate their performance on four downstream applications, covering contrast-independent (anatomy reconstruction/contrast synthesis, brain segmentation), and contrast-dependent (super-resolution, bias field estimation) tasks. Extensive experiments on six public datasets demonstrate that Brain-ID achieves state-of-the-art performance in all tasks on different MRI modalities and CT, and more importantly, preserves its performance on low-resolution and small datasets. Code is available at https://github.com/peirong26/Brain-ID.

  • 5 authors
·
Nov 28, 2023

PURE: A Diagnostic Benchmark for Multi-Granularity Multimodal Identity Matching

Identity matching asks whether two records denote the same identity, yet the answer depends on the target granularity. Two records may match at the base level but not at the variant level: they share an underlying design while differing in attributes such as color or size. Final matching accuracy does not separately characterize the capabilities involved. To study this problem, we use e-commerce as a challenging real-world domain. We introduce PURE, a diagnostic benchmark for multi-granularity multimodal identity matching covering four capability dimensions: Perception, Understanding, Reasoning, and Evidence-grounded Judgment. The benchmark comprises 1,457 multiple-choice questions across 14 tasks, derived from real-world matching pairs and verified by two domain experts. Across ten recent MLLMs, overall scores range from 47.1% to 86.0%. Understanding receives the highest mean score and Judgment the lowest, with weaknesses in visual difference localization and variant-level rule judgment. Modality ablations show that models benefit from multimodal evidence but can incorrectly identify conflicts between matching records. In direct matching, most models recognize matching pairs more reliably than non-matching pairs at the base level, whereas the reverse holds at the variant level. PURE therefore reveals what aggregate matching accuracy hides: not only whether models judge a pair correctly, but where they struggle to interpret evidence and apply matching criteria.

  • 4 authors
·
Nov 16

Pivotal Tuning for Latent-based Editing of Real Images

Recently, a surge of advanced facial editing techniques have been proposed that leverage the generative power of a pre-trained StyleGAN. To successfully edit an image this way, one must first project (or invert) the image into the pre-trained generator's domain. As it turns out, however, StyleGAN's latent space induces an inherent tradeoff between distortion and editability, i.e. between maintaining the original appearance and convincingly altering some of its attributes. Practically, this means it is still challenging to apply ID-preserving facial latent-space editing to faces which are out of the generator's domain. In this paper, we present an approach to bridge this gap. Our technique slightly alters the generator, so that an out-of-domain image is faithfully mapped into an in-domain latent code. The key idea is pivotal tuning - a brief training process that preserves the editing quality of an in-domain latent region, while changing its portrayed identity and appearance. In Pivotal Tuning Inversion (PTI), an initial inverted latent code serves as a pivot, around which the generator is fined-tuned. At the same time, a regularization term keeps nearby identities intact, to locally contain the effect. This surgical training process ends up altering appearance features that represent mostly identity, without affecting editing capabilities. We validate our technique through inversion and editing metrics, and show preferable scores to state-of-the-art methods. We further qualitatively demonstrate our technique by applying advanced edits (such as pose, age, or expression) to numerous images of well-known and recognizable identities. Finally, we demonstrate resilience to harder cases, including heavy make-up, elaborate hairstyles and/or headwear, which otherwise could not have been successfully inverted and edited by state-of-the-art methods.

  • 4 authors
·
Jun 10, 2021

MagicID: Hybrid Preference Optimization for ID-Consistent and Dynamic-Preserved Video Customization

Video identity customization seeks to produce high-fidelity videos that maintain consistent identity and exhibit significant dynamics based on users' reference images. However, existing approaches face two key challenges: identity degradation over extended video length and reduced dynamics during training, primarily due to their reliance on traditional self-reconstruction training with static images. To address these issues, we introduce MagicID, a novel framework designed to directly promote the generation of identity-consistent and dynamically rich videos tailored to user preferences. Specifically, we propose constructing pairwise preference video data with explicit identity and dynamic rewards for preference learning, instead of sticking to the traditional self-reconstruction. To address the constraints of customized preference data, we introduce a hybrid sampling strategy. This approach first prioritizes identity preservation by leveraging static videos derived from reference images, then enhances dynamic motion quality in the generated videos using a Frontier-based sampling method. By utilizing these hybrid preference pairs, we optimize the model to align with the reward differences between pairs of customized preferences. Extensive experiments show that MagicID successfully achieves consistent identity and natural dynamics, surpassing existing methods across various metrics.

  • 7 authors
·
Mar 16, 2025 2

Improving the Shortest Plank: Vulnerability-Aware Adversarial Training for Robust Recommender System

Recommender systems play a pivotal role in mitigating information overload in various fields. Nonetheless, the inherent openness of these systems introduces vulnerabilities, allowing attackers to insert fake users into the system's training data to skew the exposure of certain items, known as poisoning attacks. Adversarial training has emerged as a notable defense mechanism against such poisoning attacks within recommender systems. Existing adversarial training methods apply perturbations of the same magnitude across all users to enhance system robustness against attacks. Yet, in reality, we find that attacks often affect only a subset of users who are vulnerable. These perturbations of indiscriminate magnitude make it difficult to balance effective protection for vulnerable users without degrading recommendation quality for those who are not affected. To address this issue, our research delves into understanding user vulnerability. Considering that poisoning attacks pollute the training data, we note that the higher degree to which a recommender system fits users' training data correlates with an increased likelihood of users incorporating attack information, indicating their vulnerability. Leveraging these insights, we introduce the Vulnerability-aware Adversarial Training (VAT), designed to defend against poisoning attacks in recommender systems. VAT employs a novel vulnerability-aware function to estimate users' vulnerability based on the degree to which the system fits them. Guided by this estimation, VAT applies perturbations of adaptive magnitude to each user, not only reducing the success ratio of attacks but also preserving, and potentially enhancing, the quality of recommendations. Comprehensive experiments confirm VAT's superior defensive capabilities across different recommendation models and against various types of attacks.

  • 6 authors
·
Sep 25, 2024

Constraining the Commit Boundary: A DIO/ODI-Informed Authorization Guardrail for Agentic Entity Resolution

Agentic Entity Resolution (ER) systems iteratively plan actions, retrieve evidence, revise hypotheses, and propose graph mutations. An erroneous identity hypothesis may condition later retrieval and produce apparent confirmation. This paper proposes a Digital Identity Optimization (DIO) and Ontology of Digital Identity (ODI)-informed authorization boundary between evidence available for agent reasoning and evidence eligible to authorize persistent identity-changing mutations. A domain-governed constraint-binding function maps selected reconstruction-failure distinctions to explicit identity-preserving constraints. An abstract two-phase supervisor permits a commit only when claim-specific authorization-eligible evidence supports every required proposition, relevant conflicts are resolved, the operation remains within its authorized scope, and relevant state and policy versions remain valid. Admission as UNVERIFIED does not confer authorization eligibility. Separate claim-specific promotion governs evidentiary use; insufficient support or unresolved material conflict leads to deferral. The contribution is a specification connecting diagnostic-to-constraint mapping, evidence promotion, proposition coverage, conflict handling, scope binding, and commit-time version integrity. A proposed evaluation protocol is designed to assess the mapping's incremental value beyond generic authorization and conventional identifier rules. This is a conceptual architecture without implementation or empirical validation, not a theorem of semantic correctness. Its property depends on domain-policy adequacy, evidence promotion, and enforcement. It does not prevent erroneous hypotheses or hypothesis-conditioned retrieval; dependency-aware evidence flow remains future research.

  • 1 authors
·
Oct 27

Who Drifted: the System or the Judge? Anytime-Valid Attribution in LLM Evaluation Pipelines

Continuous evaluation of LLM products relies on a strong LLM judge treated as ground truth: a cheap monitor scores every interaction and a team is paged when the score drifts down. But the judge is itself a model behind an API, and a silent version bump or scoring-prompt update changes how it scores -- so every drift alarm is ambiguous between a worse product and a changed judge. We resolve the ambiguity with a fixed, human-labeled anchor set that the current judge re-scores at a steady interleave, a second betting e-process on the judge-versus-human gap, and a guard-window rule returning a verdict in {none, system, judge}. We prove anytime-validity, one-way identification (only the judge can move the anchors), an attribution race whose design law is that the anchors must out-run the main process they guard, and process orthogonality. On two real judge changes, a silent version bump is detected as judge drift in 60/60 runs with zero judge-to-system misattribution, and a contaminating strict-prompt change is correctly attributed on 110 of 120 runs at guard width 300 -- while the industry-default rolling z-test false-alarms on 75% of drift-free streams. Every experiment replicates on a second domain (TL;DR summarization) with nothing re-tuned, and where the domains differ the differences are the ones the race predicts: the strict-prompt change shifts scores harder there, so the anchors fire faster and attribution becomes perfect (240/240). The monitor runs at approximately 0.64 of the cost of strong-judging every item, or 0.21 in a cheaper-but-deafer regime.

  • 1 authors
·
Jun 12

Training for Identity, Inference for Controllability: A Unified Approach to Tuning-Free Face Personalization

Tuning-free face personalization methods have developed along two distinct paradigms: text embedding approaches that map facial features into the text embedding space, and adapter-based methods that inject features through auxiliary cross-attention layers. While both paradigms have shown promise, existing methods struggle to simultaneously achieve high identity fidelity and flexible text controllability. We introduce UniID, a unified tuning-free framework that synergistically integrates both paradigms. Our key insight is that when merging these approaches, they should mutually reinforce only identity-relevant information while preserving the original diffusion prior for non-identity attributes. We realize this through a principled training-inference strategy: during training, we employ an identity-focused learning scheme that guides both branches to capture identity features exclusively; at inference, we introduce a normalized rescaling mechanism that recovers the text controllability of the base diffusion model while enabling complementary identity signals to enhance each other. This principled design enables UniID to achieve high-fidelity face personalization with flexible text controllability. Extensive experiments against six state-of-the-art methods demonstrate that UniID achieves superior performance in both identity preservation and text controllability. Code will be available at https://github.com/lyuPang/UniID

  • 7 authors
·
Dec 3, 2025

IDNet: A Novel Dataset for Identity Document Analysis and Fraud Detection

Effective fraud detection and analysis of government-issued identity documents, such as passports, driver's licenses, and identity cards, are essential in thwarting identity theft and bolstering security on online platforms. The training of accurate fraud detection and analysis tools depends on the availability of extensive identity document datasets. However, current publicly available benchmark datasets for identity document analysis, including MIDV-500, MIDV-2020, and FMIDV, fall short in several respects: they offer a limited number of samples, cover insufficient varieties of fraud patterns, and seldom include alterations in critical personal identifying fields like portrait images, limiting their utility in training models capable of detecting realistic frauds while preserving privacy. In response to these shortcomings, our research introduces a new benchmark dataset, IDNet, designed to advance privacy-preserving fraud detection efforts. The IDNet dataset comprises 837,060 images of synthetically generated identity documents, totaling approximately 490 gigabytes, categorized into 20 types from 10 U.S. states and 10 European countries. We evaluate the utility and present use cases of the dataset, illustrating how it can aid in training privacy-preserving fraud detection methods, facilitating the generation of camera and video capturing of identity documents, and testing schema unification and other identity document management functionalities.

  • 11 authors
·
Sep 2, 2024

ID-Animator: Zero-Shot Identity-Preserving Human Video Generation

Generating high fidelity human video with specified identities has attracted significant attention in the content generation community. However, existing techniques struggle to strike a balance between training efficiency and identity preservation, either requiring tedious case-by-case finetuning or usually missing the identity details in video generation process. In this study, we present ID-Animator, a zero-shot human-video generation approach that can perform personalized video generation given single reference facial image without further training. ID-Animator inherits existing diffusion-based video generation backbones with a face adapter to encode the ID-relevant embeddings from learnable facial latent queries. To facilitate the extraction of identity information in video generation, we introduce an ID-oriented dataset construction pipeline, which incorporates decoupled human attribute and action captioning technique from a constructed facial image pool. Based on this pipeline, a random face reference training method is further devised to precisely capture the ID-relevant embeddings from reference images, thus improving the fidelity and generalization capacity of our model for ID-specific video generation. Extensive experiments demonstrate the superiority of ID-Animator to generate personalized human videos over previous models. Moreover, our method is highly compatible with popular pre-trained T2V models like animatediff and various community backbone models, showing high extendability in real-world applications for video generation where identity preservation is highly desired. Our codes and checkpoints will be released at https://github.com/ID-Animator/ID-Animator.

  • 9 authors
·
Apr 23, 2024

Mitigating Popularity Bias in Recommendation with Global Listwise Learning and Progressive Bi-Weighting

In recommender systems, user feedback typically follows a long-tail distribution, which leads many recommendation algorithms to exacerbate popularity bias by disproportionately favoring popular items. To mitigate this issue, recent studies have employed Inverse Propensity Scoring (IPS) to rebalance training data via reweighting user-item interactions. However, the effectiveness of IPS-based approaches is often constrained by locally unbiased objectives and inaccurate propensity estimation. In this paper, we propose Multinomial Likelihood with Bi-Weighting (Mult-BiW) to address these limitations. First, we introduce a debiasing framework, termed Mult-IPS, which integrates multinomial likelihood with IPS to capture global and unbiased user preferences over the entire item set. Second, we develop a Bi-Weighting (BiW) strategy that jointly leverages propensity scores and a collection model, incorporating a smoothing mechanism to enhance the robustness of propensity estimation. We further provide theoretical analyses that establish an upper bound on the empirical bias and characterize the optimal form of the collection model. Third, to mitigate the adverse effects of aggressive reweighting on representation learning, we design a Progressive Bi-Weighting strategy that gradually transitions from discriminative representation learning to popularity debiasing. Extensive experiments on real-world datasets show that Mult-BiW consistently outperforms state-of-the-art baselines.

  • 5 authors
·
Sep 27

From Poses to Identity: Training-Free Person Re-Identification via Feature Centralization

Person re-identification (ReID) aims to extract accurate identity representation features. However, during feature extraction, individual samples are inevitably affected by noise (background, occlusions, and model limitations). Considering that features from the same identity follow a normal distribution around identity centers after training, we propose a Training-Free Feature Centralization ReID framework (Pose2ID) by aggregating the same identity features to reduce individual noise and enhance the stability of identity representation, which preserves the feature's original distribution for following strategies such as re-ranking. Specifically, to obtain samples of the same identity, we introduce two components:Identity-Guided Pedestrian Generation: by leveraging identity features to guide the generation process, we obtain high-quality images with diverse poses, ensuring identity consistency even in complex scenarios such as infrared, and occlusion.Neighbor Feature Centralization: it explores each sample's potential positive samples from its neighborhood. Experiments demonstrate that our generative model exhibits strong generalization capabilities and maintains high identity consistency. With the Feature Centralization framework, we achieve impressive performance even with an ImageNet pre-trained model without ReID training, reaching mAP/Rank-1 of 52.81/78.92 on Market1501. Moreover, our method sets new state-of-the-art results across standard, cross-modality, and occluded ReID tasks, showcasing strong adaptability.

  • 5 authors
·
Mar 2, 2025

Generalized Face Anti-spoofing via Finer Domain Partition and Disentangling Liveness-irrelevant Factors

Face anti-spoofing techniques based on domain generalization have recently been studied widely. Adversarial learning and meta-learning techniques have been adopted to learn domain-invariant representations. However, prior approaches often consider the dataset gap as the primary factor behind domain shifts. This perspective is not fine-grained enough to reflect the intrinsic gap among the data accurately. In our work, we redefine domains based on identities rather than datasets, aiming to disentangle liveness and identity attributes. We emphasize ignoring the adverse effect of identity shift, focusing on learning identity-invariant liveness representations through orthogonalizing liveness and identity features. To cope with style shifts, we propose Style Cross module to expand the stylistic diversity and Channel-wise Style Attention module to weaken the sensitivity to style shifts, aiming to learn robust liveness representations. Furthermore, acknowledging the asymmetry between live and spoof samples, we introduce a novel contrastive loss, Asymmetric Augmented Instance Contrast. Extensive experiments on four public datasets demonstrate that our method achieves state-of-the-art performance under cross-dataset and limited source dataset scenarios. Additionally, our method has good scalability when expanding diversity of identities. The codes will be released soon.

  • 5 authors
·
Jul 11, 2024